Houzz is the new way to design your home.
420 water spout Laundry Room Design Photos
Traditional Laundry Room
moving any plumbing and gas line. Our sink is to the right of the window and we converted it from dispersing the water into the sink to running down to water line. Was curious as to how the water flows out and how the dryer gas line runs. We were told they should be placed on an outter wall which these clearly
sheets and towels, add ½ cup of baking soda to the rinse cycle.• Banish stains with a paste made from 6 tablespoons of baking soda and ½ cup of warm water. Apply to the stain, rub and launder. For the toughest stains, let the paste sit for one or two hours. (Always check for color fastness.)• Freshen
For extra-fluffy sheets and towels, add ½ cup baking soda to the rinse cycle.Banish stains with a paste made from ¾ cup baking soda and ½ cup of warm water. Apply to the stain, rub and launder. For the toughest stains, let the paste sit for one or two hours. (Always check for colour fastness.)Freshen
Middlesex County Project Designer for Home Additions and Remodeling
DBP offers a unique, project profile analysis, budget, and design process for homeowners planning an addition or renovation. Contact us to schedule a 15-minute phone call to discuss your next project!
Tomaro Design Group
Traditional Home, Palos Verdes Esates
Great tap/spout, handy for dog washing!!!
Ellis Custom Homes LLC
Indian Lakes, Mountain Lodge Style
It is a Luxart C137-BN "Carmella" Pulldown. The spout height is 14 11/16". The sink is a galvanized bucket.
Design Moe Kitchen & Bath / Heather Moe designer
Poway P Laundry room new construction
Where are the water shut off valves of the washer in the cabinet?
CONSTRUCTION HARDROCK CONSTRUCTIONSave to IdeabookEmail Photo A noise you don't want to ignore is what's known as "water hammer." Newer machines add small bursts of water repeatedly, and the water turning on and off can rattle the pipes in the wall, potentially causing leaks. If you hear a clunking sound when
Josephine Design LLC
How would you get to the dryer vent and washer water connections if you had to?
Vent and water connections
look at comments and question about vent and water connections
if we move the hot water heater into the garage we could do this wall in the laundry room... nice!
Castle Building & Remodeling
Contemporary House Remodel and Addition
I want to do this, but would like to know where to position gas shut off as well as water valves so that there is good access. Also, is it possible to plug in the appliances and then push them into the tight space?
is 30" AFF to 60" AFF. This is the location of the access panel located in the side wall of the closet behind the laundry closet. So to access the water and gas connections, and most of the back side of the units one must unscrew the access panel inside the closet behind the laundry closet. We would
What a great question. To start, the gas shut off and water valves are behind the unit, accessible through the access panel in the adjoining closet... The electrical cords and gas whip are long enough to attach
Claudio Ortiz Design Group, Inc.
When measuring, make sure to check the depth carefully. The water hoses and vent hoses take up considerable space to the back. If you have space and are at the right stage of construction, suggest you put the water pipe turn off/on valves/connectors to the side of the washer or if possible
read comments about venting and water being located to side of the units.
Comments about water pipe turn off/on valves/connectors
Seattle Staged to Sell LLC
Beautiful Seattle Craftsman House
how do you access the water supply to the washer and the dryer vent to the dryer
Is there an access in back of wall to get to water and vent?
My own washer and dryer are front loading Miele appliances and I assure you that they use less water and less electricity despite the longer cycles. Seattle City Light gave us $500 rebate when we bought these appliances long ago. But the cycles are
Renovating in Woodbridge? Contact a local pro