14,849 finished Outdoor Design Photos

Abramson Teiger Lima ResidenceAbramson Teiger Architects
What is the finish on the concrete? is it broomed?
sand broom or trowel finish concrete
have outdoor patio concrete finished, not just interior.
This Photo has 2 Questions: VW Fowlkes wrote: concrete terrace - What is the finish on the concrete? is it broomed
broom finished, with expansion seams
Sand finish concrete patio
Sand finish and color
matt finish and simple
concrete finish patio
Sand finish concrete
Sand finished concrete
Finish on concrete?...with a matte finish...Sand finish...Sand finish
debora carl landscape designdebora carl landscape design
the finish on the concrete table? stain? lacquer? colored concrete?
im looking to make a table like this and i like the finish.
Is an acid wash done on the concrete to achieve the sand finish?
What is the process to create sand finish?
This sand finished uncolored concrete (regular gray) was finished using Topcast #3, which is applied to the concrete when it is wet, then washed off the next day to reveal the sand in the concrete.
The structure of this outdoor kitchen is concrete block finished with a custom colored
This sand finished uncolored concrete (regular gray) was finished using Topcast #3, which is applied to the concrete when it is wet, then washed off the next day to reveal the sand in the concrete.
Tropical Beach Entry PoolBRADANINI & ASSOCIATES
Please say what kind of finish the sand look is on the floor of pool Thanks
Pebble Tec finish creates the look of a natural, sandy beach entry
preference.This Pebble Tec finish creates the look of a natural, sandy beach entry and blends in with the landscape's native boulders and grasses.Cost estimate: $92 to $105 per linear foot, installed (varies significantly according to region and labor)Pros: Long-lasting, resilient finish (15 to 20 years)More
looking than plasterColor options give homeowners a variety of looksStain resistantNonslip finishLow maintenanceCons: More expensive than plasterNeeds to be installed by licensed, trained expertsNon-slip finish can be rough on feet if not installed correctlyScale (calcium or mineral buildup) can be a
Outdoor DiningDumican Mosey Architects
how do you keep the concrete from getting slippery? Is it a broom finish?
what finish did you use on the glu lam beams? is that good in hot sun
What type of wood did you use on the house and how is it finished?
sealer with a hint of color. ligh acid wash finish or light sandblast finish.
special mix with white sand and a sealer with a hint of color. ligh acid wash finish or light sandblast finish.
A light acid-wash finish or light sandblast finish provides enough slip resistance for the wet environment. You will want to do a sample of both/either to make sure it works for you functionally and aesthetically. -- white sand mix with a hint of
A light acid-wash finish or light sandblast finish provides enough slip resistance for the wet environment.
debora carl landscape designdebora carl landscape design
This is sand finished uncolored concrete.
No, this is sand finished concrete poured in place and scored as shown. They are not individual concrete pavers but one large surface with scoring
No, this is sand finished concrete poured in place and scored as shown. They are not individual concrete pavers but one large surface with scoring to add
See notes on sand finished concrete
Concrete is uncolored & sand finished
No just your standard rock salt finish the coffee table is coming this week with the fire pit in it I can hardly wait
front patio concrete finish. standard rock salt finish
rock salt concrete finish - scored
Concrete salt finish
salt finish concrete
rock salt finish concrete
Patio with salt finish
Concrete with rock salt finish.
Pool Deck Salt Finish
Salt finish with scoring
Rock salt finish...Rock salt finish.
Pools & Water FeaturesFamosa- The Surface Studio
possibilitiesLongest lasting of all pool finishesA shimmering and luxurious effectCons:Depending on the glass tile and pattern chosen, can be the most expensive of all finishesRequires an experienced tile setter educated in the specific requirements to install glass tile properlyLong installation time
Glass tile is a luxurious pool finish choice. While the initial investment of anywhere from $75 to $100 per square foot (installed) is a jaw dropper, glass tile surfaces can last almost indefinitely if maintained properly.Cost estimate: $75 to $100 per square footPros:Endless variety of design poss
up much oil the first time it’s finished. Apply it with a brush or a pump sprayer (like the ones used by pest control people) and then wipe off the excess, like a hand-rubbed finish on a fine piece of furniture. We find that it is best to apply a second coat of finish about four months after the deck
SedgesThe Garden Consultants, Inc.
U.S., depending on the variety. Growing tips: Mow your sedge lawn in the spring to remove any winter burn, and let the seeds drop after they have finished flowering to allow for the sedge to fill in more thickly. Plant it in spring or fall, or even in the winter in a very warm climate.
U.S., depending on the variety. Growing tips: Mow your sedge lawn in the spring to remove any winter burn, and let the seeds drop after they have finished flowering to allow for the sedge to fill in more thickly. Plant it in spring or fall, or even in the winter in a very warm climate
the U.S., depending on the variety.Growing tips: Mow your sedge lawn in the spring to remove any winter burn, and let the seeds drop after they have finished flowering to allow for the sedge to fill in more thickly. Plant it in spring or fall, or even in the winter in a very warm climate.
Don Maldonado @ Chicago Green DesignChicago Green Design Inc.
up with other finishes. Leave it: Microtopped concrete The luster and depth of a concrete microtopping is surely covetable, but it’s not great in houses with big dogs or rambunctious children. Daily traffic can create deep scratches that aren’t erased by the regular resealing this finish requires.
homeowner made the synthetic grass look even more realistic by keeping the turf area small and breaking it up with other finishes.
Faux turf mixed within other finishes.
Synthetic grass, turf area kept small broken up with other finishes
and just as durable. This homeowner made the synthetic grass look even more realistic by keeping the turf area small and breaking it up with other finishes.
up with other finishes.Leave it: Microtopped concreteThe luster and depth of a concrete microtopping is surely covetable, but it’s not great in houses with big dogs or rambunctious children. Daily traffic can create deep scratches that aren’t erased by the regular resealing this finish requires.More:
Malibu ResidenceSage Design Studios, Inc.
contractor out of Calabasas named Malibu Pools that did the job. I believe it was a white concrete with oyster shell fines hand broadcast. Acid etch finish.
pool surround white concrete with oyster shell fines hand broadcast acid etch finish
pool surround white concrete with oyster shell fines hand broadcast acid etch finish
I believe it was a white concrete with oyster shell fines hand broadcast. Acid etch finish.
white concrete with oyster fines hand broadcast and an acid etch finish.
Malibu Pools that did the job. I believe it was a white concrete with oyster shell fines hand broadcast. Acid etch finish.
white concrete with acid etched finish
concrete coping and deck - white concrete with oyster shell fines hand broadcast and acid etch finish
exteriorsMark English Architects, AIA
heftier the better. But, naturally as thickness goes up so does price. The 5/4" material (net finished 1") will work great in your area and it spans 24" on center from joist to joist. Thicker 2" material (net finished 1-1/2") will be far more expensive. We're glad you chose Ipe over PVC, and hope this bit
below the surface of the board, then infilled with a small round piece of ipe that’s glued in place to cover the screw. Then it’s sanded down and finished with a sealer. Because ipe is so dense, this technique is labor intensive and dulls drill bits quickly. The final option with ipe is to router a
cost of the predrilled boards is higher — as is the cost of the fasteners — but the labor cost is lower. It may still be a wash on pricing, but the finished product will be more seamless.
© 2014 Houzz Inc.
Houzz® The new way to design your home™