4,050 1x1 Staircase Design Photos

chadbourne + doss architects
5 Reviews
Vineyard Residence
Ideabooks5,990
Questions3
railing that looks very much like this one. The iron rungs on mine are 1 1/4" wide. I'm now trying to find the right hand rail and am not sure how much
Hi. The steel balustrade is 1/2 x 1-1/2. The wood handrail is 2" wide x 1-1/2" high. Screws attach through the metal into the
The steel balustrade is 1/2 x 1-1/2. The wood handrail is 2" wide x 1-1/2" high. Screws attach through the metal into the bottom
“ograja” — loda68
Neiman Taber Architects
14 Reviews
Weyand Residence
Ideabooks1,501
Questions3
It is made of 1"by 1" hardwood pickets (poplar). They are doweled into the stair tread below
1 x 1 poplar doweled into tread below. Beautiful railing and staircase.
clean and lovely!!!1 I love the bench and table under the stairway.
“Staircase for basement” — dkarmst
CG&S Design-Build
12 Reviews
A House With Zip!
Ideabooks800
Questions6
Design-BuildThe balusters are 1/2" x 1/2" square steel pickets. They support a 1 1/2" x 3/8" steel railing, which is capped with 2" x 3" or 4" mesquite (not sure
“rail” — Priscilla Tephabock
Northern Virginia Landscape Architect and Custom Pool Builder
Pristine Acres is committed to offering the highest-quality, most professional landscape design/installation services with the best customer service in the Washington DC Metro.
Sponsored
BAAN design
Lake Washington residence
Ideabooks3,921
Questions4
The door trim is 5/4x2 painted poplar The baseboard is 1x4 painted poplar
Base and Casing - Base 1 x 4 Painted Poplar Door Trim 5/4 x 2 Painted
Door trim is 5/4x2 painted poplar Baseboard is 1x4 painted poplar
The door trim is 5/4x2 painted poplar The baseboard is 1x4 painted poplar
and door/windowframes - very simple - The door trim is 5/4x2 painted poplar The baseboard is 1x4 painted poplar
1x4 baseboard square with eased edges
“door/baseboard trim” — vanhorn
Bluetime Collaborative
steel and cherry stair
Ideabooks8,531
Questions3
wide x 10-1/2ft long x 10ft high. Any ideas?
the wood handrail is a standard shape - round with a flat on the bottom. The metal is 1 1/4" steel angle
run of 10-1/2ft run. Incline will end up just under 45deg. Seems steep? Don't want to have to put winders.. The space I have to work with is 5-1/2ft wide
handrail is a standard shape - round with a flat on the bottom. The metal is 1 1/4" steel angle from a local metal supply place. the wood is attached to the
angle with round head screws through pre-drilled holes in the angle. 7 1/2" rise and 10 1/2" run.
“Cool stairs!” — Chris Watson
CG&S Design-Build
12 Reviews
A House With Zip!
Ideabooks21,199
Questions16
The balusters are 1/2" x 1/2" square steel pickets. They support a 1 1/2" x 3/8" steel railing, which is capped with 2" x 3" or 4" mesquite (not sure
The steel railing is welded to 1/2" steel pickets.
(although rarely) but an edge-banded veneer would likely be the most common. A 1/4" veneer is applied to the entire wall with the rectangular panels added on
Only 2x 2 3/4" beam. Aux extrémités
“Stairs” — kornelio
Synthesis Inc.
20 Reviews
Condo Renovation
Ideabooks1,555
Questions5
1 1/2" and is completely round.
subcontractor fabricate it. The railing consists of 1 1/2" stainless steel tube as posts, 3/4" x 1 1/4" rectangular frame, and 3/4" round infill. Handrail
Dream house 1 room on each floor...Diagonal Lines #1
“Stairs 2” — yolked6
Tim Cuppett Architects
13 Reviews
Renovation
Ideabooks4,549
Questions9
baseboard. The baseboard looks like a 1x10 or 1x8, door 1x6, and window 1x4? And is the face profile of the backband 1"?
“casing” — katymace
© 2014 Houzz Inc. Houzz® The new way to design your home™