3,349 warmlyyours1 Staircase Design Photos

Modern Staircase
Ideabooks3,708
Questions3
open riser handrail on top of carriage/ 1 side flush to wall
Bocci 14.5 Five Pendant Chandelier $1,675.00 | YLighting
Bocci | 14.1 Single Pendant
“Stairs” — Chad Jewell
Joel Eckstein
Great 1 bedroom nyc
Ideabooks4,452
Questions1
Great 1 bedroom nyc
1 bed room with stairs
Raised Floor like Idea #1
“like the lofty look” — Shannon Landers
Jeff King & Company
7 Reviews
Staircase
Ideabooks26,533
Questions7
I did something similar to this.. very easy just layers of moulding: • Cut MDF (or you can you 1x10 & 1x12 or whatever the width you'd like to use-wider on bottom • Cut tall base moulding and attach around bottom • cut smaller base molding (for the
ceiling. • Cut a piece of mdf/wood to cover the top of that crown moulding just attached (otherwise it'll collect dust in there) For the header: • Cut 1x12 for top horizontal header • Cut and attach picture moulding to the bottom of the header • Cut and attach large crown moulding to the top of header
“Arts and crafts stairs” — soozem
Crisp Architects
45 Reviews
Game Room
Ideabooks3,193
Questions2
0sha requirement = 1 1/2 inches
space. If you plan to use copper pipe for railings, remember that Occupational Safety and Health Administration standards require a minimum diameter of 1½ inches.
space. If you plan to use copper pipe for railings, remember that Occupational Safety and Health Administration standards require a minimum diameter of 1½ inches.
“copper railing” — reneespiegelglass
Chris Pardo Design - Elemental Architecture
4 Reviews
Crockett Residence
Ideabooks3,522
Questions4
1 beam stair. wire safety rail
escalera - 1
“Center riser” — lordora
Peter A. Sellar - Architectural Photographer
5 Reviews
Staircase
Ideabooks22,244
Questions12
fabulous cast iron for ground to 1 st floor
Staircase 1
“Paneling going up stairs” — nivlekgt
The Interior Place (S) Pte Ltd
Pandan Valley Condo
Ideabooks31,274
Questions8
From 1/f to M/f
Stairs 1...stair 1
“case” — Suraj Ahuja
Peter Rose Architecture and Interiors
1 Review
Landing
Ideabooks10,140
Questions10
your main body it will work. If you are using a 1/2" flat stock, then you can use a 5/8" on the top or if you want more of a shadow line even 3/4". The best thing to do would to be an initial mock up and see what you like best. Let the top trim overhang 1- 1.5" at each end.
window trim TOp board is thicker and sticks out about 1 inch per side.
“Windows frame” — victorlsh
© 2014 Houzz Inc.
Houzz® The new way to design your home™