Houzz is the new way to design your home.
23,854 warmlyyours1 Traditional Kitchen Design Photos
island levels need measurement of different heights. Assuming granite is 1 1/4" thick. Thanks you.
There is approx. 1 1/2" between the top of the lower counter and the bottom of the upper counter. In other words approx. 2 3/4" difference in height.
Keep in mind that standard height base cabinets are 34 1/2" without the top and a traditional vanity height is 30". Crystal will do custom heights of
JACK ROSEN CUSTOM KITCHENS
Grey Country Kitchen
kitchen. The dimensions of the hood are 54" wide x 37" high x 23-1/2" deep. The brackets are 1-1/2" wide with 3" wide backers.
the ceiling height of this kitchen is 103". The beams are approximately 7-1/2" x 3-3/4" high.
Beams on kitchen ceiling 7 1/2 x 3 3/4 high
Arch Studio, Inc.
could off-center the sink and window only under the following condition: 1. If there is no center mullion dividing the window equally because your eye
Yes- I purchased the flooring from Lumber Liquidators. It is 3/4" thick by 5-1/2" wide hand-scraped plank solid teak flooring.
by Amerock 3 1/2" Highland Ridge Cup Pull Item#: AM55318-PN 5" Highland Ridge Knob Backplate
4 by 8 island. 3 ft deep cabinet and 1 ft overhanging
Angie Keyes CKD
White Modern Classic Kitchen
the white tile is 3x6 subway ceramic tile, the blue tiles are 1x1 glass , i can remember the vendor, it might of been Oceanside glass
The sink wall is 13-1/2' , the wall from frig to corner of oven wall is 14' , so 13-1/2 'x 14' are the room dimensions. I can do
Kirstin kitchen 1
Alicia Shearer, ASID, CID
island is 43 1/2" wide from the outer flagged corners by 94 1/2' long actual width of island is 40 1/2" x 91 1/2" long
Standard 2 1/4' oak flooring - Minwax Stain - Early American 230 or Gunstock 231 - try
Venegas and Company
love the edges with the farmhouse sink. Is that a 1 1/2 inch edge?
Thank you for your inquiry! The stone is 1-1/4" thick.
TOO WIDE, 3 RACKS, 1 SHELF, MUG HOOKS
Kitchen Classics - Charles Heller
on each side of the rangetop are 3" wide, the wall cabinet end panels are 1 1/4" wide, and the base cabinet end panels are 3/4" wide.
approximately 28" above the cook surface. The upper cabinet doors are 20 1/2" wide.
HWSS 1pc box hood with integrated shallow front shelf
1. hood as I have on drawings, except I drew with 2 panels and this has 3
Venegas and Company
This Old House - West Newton Hill Kitchen
and 13337-wzc 4" center to center) and two knobs (18126-wzc 1 1/4" diameter and 18128-wzc 1 1/2" diameter).