EnvironmentalLights.com's Photos
2,779 Photos
mod-a-clip Straight Clip for Angled LED Under Cabinet Light
$0.62
Ideabooks0
Questions0
Each 12 or 20 inch Modular Angled LED Under Cabinet Light comes with 2 clips and 2 screws, while the 40 inch light bars come with 3 clips and 3 screws. If you require additional or replacement clips, they are sold in sets of 1 clip and 1 M2.6x10 screw. Clips are easy to mount and the Modular Angled Light bars snap into place.
mod-t-corner Corner Connector for LED Under Cabinet Light
$1.95
Ideabooks0
Questions0
The Corner Bar-to-Bar Connector for Modular Ultra Thin LED Under Cabinet Lights is a sleek way to connect Ultra Thin light bars together at a 90 degree angle. Use these joiners to easily create seamless light systems.
mod-t-conn Straight Connector for LED Under Cabinet Light
$1.20
Ideabooks0
Questions0
The Straight Bar-to-Bar Connector for Modular Ultra Thin LED Under Cabinet Lights is a sleek way to connect Ultra Thin light bars together in series. Use these joiners to easily create seamless lighting systems.
mod-t-clip Straight Clip for LED Under Cabinet Light
$0.62
Ideabooks0
Questions0
Each 12 or 20 inch Modular Ultra Thin LED Under Cabinet Light comes with 2 clips and 2 screws, while the 40 inch light bars come with 3 clips and 3 screws. If you require additional or replacement clips, they are sold in sets of 1 clip and 1 M2.6x10 screw. Clips are easy to mount and the Modular Ultra Thin Light bars snap into place.
mod-t-switch Master Switch for Modular LED Under Cabinet Light
$3.78
Ideabooks0
Questions0
This sleek master switch is a great addition to your Modular LED Under Cabinet Lighting system from EnvironmentalLights. Although each Modular LED Under Cabinet Bar has an individual on/off switch, the Master Switch allows you to synchronously control an entire installation of Modular LED Under Cabinet Lights. This switch only fits the Modular Ultra Thin LED Under Cabinet Lig...More
mod-t-dc DC Junction Connector for Modular LED Under Cabinet Light
$3.78
Ideabooks0
Questions0
This accessory to the Modular LED Under Cabinet Lights allows you to customize the wiring of your installation. Trim wires to the desired length, then use the DC Junction Connector to connect them to your lighting system. The DC Junction Connector only fits the Modular Ultra Thin LED Under Cabinet Light Bars. However, the Ultra Thin bars may be followed by any assortment of ...More
mod-dim In Line Dimmer for Modular Under Cabinet Lights
$8.77
Ideabooks0
Questions0
This easy-to-use in line dimmer is a great addition to your Modular LED Under Cabinet Lights from EnvironmentalLights. The mod-dim is compatible with all Modular Under Cabinet Lights, and the wire lengths before and after the dimmer give you the flexibility to place it within easy reach to control your system. Buttons give you the ability to easily turn all lights connected t...More
mod-t-TD Touch Dimmer for Modular Under Cabinet Lights
$5.39
Ideabooks0
Questions0
This sleek touch dimmer is a great addition to your Modular LED Under Cabinet Lighting system from EnvironmentalLights. Simply touch it to turn the lights on or off, or touch and hold to dim or brighten the lights. Simple to install and easy to use. This touch dimmer is only compatible with the Modular Ultra Thin LED Under Cabinet Light Bars. However, if an Ultra Thin light b...More
HBBlue455-24 LED Dimmable Grow Light (24 inch) (Blue 455 nm)
$89
Ideabooks0
Questions0
455 nanometer blue is ideally suited for algae growth. Contact us for custom engineering if you have a large project. Blue 455 nm. Radiant flux = 2.27 watts. Power consumed = 10 watts. Very energy efficient. Efficacy = 0.227 watts of radiant flux/watts of power consumed. Length = 24.5 inches = 623 mm. 24 volts DC. Dimmable, if you use one of our dimming drivers. Long lived. We ...More
HBRed660-24 LED Dimmable Grow Light (24 inch) (Red 660 nm)
$89
Ideabooks0
Questions0
660 nanometer red is ideally suited for algae growth. Contact us for custom engineering if you have a large project. Red 660 nm. Radiant flux = 1.54 watts. Power consumed = 10 watts. Very energy efficient. Efficacy = 0.154 watts of radiant flux/watts of power consumed. Length = 24.5 inches = 623 mm. 24 volts DC. Dimmable, if you use one of our dimming drivers. Long lived. We es...More
jbox-p 120 Volt Shallow Junction Box (Plastic)
$7
Ideabooks0
Questions0
This handy junction box is light weight and has a shallow depth of 1.25". Ideal for mounting under cabinets or in areas with limited space. Easy to mount to any surface using the screw holes, or mounting tabs provided. Simply insert the 120 VAC wires through the plastic push-in tabs on opposite sides and secure with wire nuts.
sq-jbox-s Square Junction Box with 2 Screws (Steel)
$7
Ideabooks0
Questions0
We offer this handy junction box as a companion part for certain square-shaped controllers that do not fit in standard United States gang boxes. It is light weight and has a shallow depth of 1.54". Ideal for mounting in areas with limited space. Easy to mount to any surface. Simply insert wires through the knockouts on opposite sides and secure with wire nuts. Includes 2 M3.5-...More
sq-jbox-p Square Junction Box with 2 Screws (Plastic)
$7
Ideabooks0
Questions0
We offer this handy junction box as a companion part for certain square-shaped controllers that do not fit in standard United States gang boxes. It is light weight and has a shallow depth of 1.46". Ideal for mounting in areas with limited space. Simply insert wires through the plastic push-in tabs on opposite sides and secure with wire nuts. Includes 2 M3.5-0.6 screws. Adjusta...More
Disconnect 102 PowerPlug Luminaire Disconnect Large
$2.41
Ideabooks0
Questions0
The first push-in disconnect to meet the new NEC and CEC code changes for non-residential fluorescent luminaires. We sell a large luminaire disconnect for thicker wire and a small one for thinner wire. For: solid wire #12-#18, or stranded wire #12-#14 (19 strand or less), or stranded tin-bonded wire #12-14 (19 strand or less), #16 (26 strand or less), or #18 (16 strand or less....More
Disconnect 182 PowerPlug Luminaire Disconnect Small
$1.94
Ideabooks0
Questions0
The first push-in disconnect to meet the new NEC and CEC code changes for non-residential fluorescent luminaires. We sell a large luminaire disconnect for thicker wire and a small one for thinner wire. For: solid wire #18-#22, or stranded wire #18 (16 strand or less), or stranded tin-bonded wire #18-22 (16 strand or less.) Perfect for OEM or retrofit lighting installations. Me...More
Cord Junction Under Cabinet Cord Junction
$3.70
Ideabooks0
Questions0
Great for connecting our LED under cabinet power and connector cables together. One input can be used on up to four outputs. There is also a screw hole in the middle of the product to allow you to secure it to the underside of the cabinet or shelf. See picture nearby.
Cord Joiner Under Cabinet Cord Joiner
$0.85
Ideabooks0
Questions0
Great for connecting our power and connector cables together.
Bar Joiner Under Cabinet Bar Joiner
$0.30
Ideabooks0
Questions0
Handy "0-profile" interconnect allows the bars to connect electrically without any additional space between bars. Nests within the cavities provided on the end of the bars. Can't be installed backwards, since the light bars work either way.
RACC72 Low Voltage Right Angle Connector Cord (6 feet long)
$3.35
Ideabooks0
Questions0
These handy extension jumpers allow you to add extra bars if you want more light. Right angle bar connector on each end. Adds only 3/8 inch to the length of a bar. Can't be installed backwards, since the light bars work either way. 6 feet long.
Bar Jumper Under Cabinet Bar Jumper
$1.60
Ideabooks0
Questions0
These handy jumpers allow you to add extra bars if you want more light. You can create serpentine patterns, as shown in the picture nearby. Adds only 3/8 inch to the length of a bar. Can't be installed backwards, since the light bars work either way. Pitch between bar centers is 1.75 inches. About 2 inches long.