4,468 polyurethane Home Design Photos

Regina Sturrock Design Inc.
2 Reviews
Regina Sturrock Design Classicism With a Twist
Ideabooks86,136
Questions54
Who can produce this polyurethane design? Thank you!
ceiling detail was custom designed by Regina Sturrock Design Inc., it is polyurethane instead of plaster and it was fabricated in sections before installing
further raises the style here is a custom-designed ceiling detail made from polyurethane. Wall paint: Carrington Beige HC-93; ceiling paint: Floral White OC-29
“Bedroom” — mb047404
Hobbs Jamieson Architecture
4 Reviews
Neutral Bay House
Ideabooks742
Questions5
Its actually a poplar veneer, 3 coats satin polyurethane, not see re brand it was a while ago. Good luck
substate with visible edge lamination. All is finished in clear satin polyurethane.
In this photograph, a poplar timber veneer on a plywood substrate has been used and finished in clear satin polyurethane. Different
substate with visible edge lamination. All is finished in clear satin polyurethane.
veneer on a plywood substrate has been used and finished in clear satin polyurethane. Different plywoods have different looks and grains to choose from. The
“Louvered door” — MOSS MANOR | Sarah James Moss
Jen Dalley ||||||||||||||
1 Review
Pine Street Bedroom Remodel
Ideabooks1,992
Questions8
the Midwest. We then painted them for a cottage look. We did not add polyurethane as a finish as it was not recommended in the lake environment. Now they
best floor paint as they need to be repainted....and then we will add a polyurethane finish this time. We love the look and feel of wood underfoot! Thanks
it's necessary to sand down the plywood before finishing the floors with polyurethane. Any advice? Will it make a big difference? Will just cleaning them
with the finish surface. Our final step was to add a few thin coats of Polyurethane to give it the shine.
Hi bharmann! Yes we sanded before applying the polyurethane and also lightly sanded between each coat we applied, which I would highly
“Estante colorida. Piso claro” — Nathalie Mehner
Loudon County Interior Designer - Best of Houzz 2015
Kim Kendall Interiors is a full service Interior Design Firm.
Sponsored
Whitestone Builders
4 Reviews
Whitestone Builders - Norhill
Ideabooks5,329
Questions9
7" quarter sawn, rifted White Oak lightly sanded with a coat of clear polyurethane
They are beautiful--just one coat of Polyurethane? How long are these boards they look very long!
7" quarter sawn, rifted White Oak lightly sanded with a coat of clear polyurethane
7" quarter sawn, rifted White Oak lightly sanded with a coat of clear polyurethane.
the floors... 7 inch white oak, rifted, quarter sawn with clear coat of polyurethane.
satin polyurethane 817 487 7867 5.95
“nice floors” — atebo11
Jen Dalley ||||||||||||||
1 Review
Pine Street Bedroom Remodel
Ideabooks823
Questions2
Can I carry this look throughout my house, kitchen and two baths? If I polyurethane it many, many times and use orientals over it, shouldn;t that keep it
before, yet not the bathroom, but I don't see why you can't try it out! Polyurethane will keep it looking great and also provide a protective seal over it
— 2 1/2-inch gold screws ($5) Wood putty ($5) 1 gallon of floor-grade polyurethane ($40)
2 1/2-inch gold screws ($5) •Wood putty ($5) •1 gallon of floor-grade polyurethane ($40)
fasteners — 2 1/2-inch gold screws ($5)Wood putty ($5)1 gallon of floor-grade polyurethane ($40)
“Paint job on shelves” — ljpointe
A.GRUPPO Architects - Dallas
4 Reviews
Groveland House
Ideabooks2,536
Questions6
up well. It looks new still. It is just southern pine plywood with a polyurethane finish.
The flooring on the second floor is polyurethane plywood to help keep cost down. Reeves says the sheets came out to about $1 per square foot for materials
polyurethane plywood...clear, polyurethane sealer...oil based polyurethane finish
“floor” — nolunolu
dSPACE Studio Ltd, AIA
7 Reviews
Master Hall
Ideabooks52,166
Questions32
The floor above has an oil based polyurethane applied to it. We like the oil based polyurethane on dark hardwood flooring applications because
Is the finish a water based polyurethane? Satin? Love the floors. Actually love everything about this.
What is the polyurethane finish? Is it matte or semigloss, or high gloss?
chocolate applied to the floors in two coats. The final finish has a polyurethane coat for a long lasting and durable floor. Good luck with your project
“Paint” — Laura Kelleher
Ellen Grasso & Sons, LLC
21 Reviews
UP05
Ideabooks19,541
Questions42
further into the wood. They were then finished with 3 coats of oil-based polyurethane
Common/Quartered red oak finished with DURASEAL stain and 3 coats of polyurethane. The color is 1 part each of Ebony, Antique Brown, and Coffee Brown
further into the wood. They were then finished with 3 coats of oil-based polyurethane
further into the wood. They were then finished with 3 coats of oil-based polyurethane
“Furniture” — Stephanie
© 2015 Houzz Inc. Houzz® The new way to design your home™