Furniture Pieces, Accessories, Objects.

Accessories, furniture pieces, etc.
Ideabooks0
Questions0
"Outsider" sideboard / credenza. 32" tall, 54" wide, 12" deep interior. Intended as home office accesssory to accept fax / printer on top and paper reams inside. As seen, this piece will cost approximately $1600 but the variations are endless.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Carcass is salvage pine flooring, Curly Maple flooring top and salvage panels from an unfinished 5 panel door on the sides and as doors.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Stunning top, a wonderful way to use excess exotic flooring.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Really big entertainment center, likely from Brazil or Argentina, made of a species of hardwood likely Brazilian Cherry or an SA Mahogany variety. Drawers added to bring functionality to a piece of furniture ready to be consigned to yesterday.
Accessories, furniture pieces, etc.
Ideabooks1
Questions0
4 Drawers added, simple hardwood plywwod, stained appropriately, flipper doors removed, existing outer doors rehinged.
Accessories, furniture pieces, etc.
Ideabooks15
Questions0
Result is storage for over 900 CD's, 450 DVD's or a mix there-of. All drawers are hyperextension slides, unit is so heavy all 4 drawers can be opened without fear of toppling over, may not be the case in all untis! A modification like this is going to cost between $500 and $1000 depending upon number of drawers, style, color, finish, etc.
“DVD,CD Storage pullouts” — 542480
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Solid teak bench. Approximately 16" deep, 36" wide, 18" tall. No mechanical fasteners, all dowel assembly, impervious to moisture. As seen, approximately $800.
Accessories, furniture pieces, etc.
Ideabooks2
Questions0
Heavily influenced by Scandanavian design of the late 50's and early 60's. Bench courtesy of Baltimore Architectural Detail
Accessories, furniture pieces, etc.
Ideabooks1
Questions0
Heavy, in the 45-55lb range.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Triquetra bench, built of salvage pine barn siding. Approximately 66" wide, 12" overall depth, 20" seat height, 25" back height.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
The triquetra is the oldest symbol describing "the father, the son, the holy ghost". This bench is finished in tongue oil, easily touched up or refinished, odorless and a great sealer.
Accessories, furniture pieces, etc.
Ideabooks1
Questions0
This object is also referred to as a "parsons bench" or "entry bench" or " foyer bench". As seen, built from salvage lumber, this object will cost in the $700 range.
Accessories, furniture pieces, etc.
Ideabooks14
Questions0
Beautiful, super tall bathroom mirror / medicine cabinets. Heavy mid-century influence. Tall, dark and handsome. Minor tweaks and they are again fully organic and Stickley sleek. $900 per mirror in oak, more in other hardwoods, available in Sapele, Black Walnut (our fave) maple or other species.
“super tall framed med cab” — more_time
Accessories, furniture pieces, etc.
Ideabooks1
Questions0
Dark stained red-oak bathroom storage cabinetry. Available in a wide variety of styles, tones and species. Imagine $1000+ for any stand-alone cabinetry.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
64" Bathroom vanity, matches previous storage cabinetry and mirrors. Veneer body with solid oak detail. Grain-matched veneer doors with grain-matched solid trim details. Specific drawer notches for plumbing, every critical spec individually called-out. This vanity has 4-5 color coats and 3-4 varnish costs. As specified, a vanity like this will cost $6000 - $7000
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Wall mounted teak cabinet, designed for remote controls or DVD storage. Veneer plywood carcass with solid wood drawer front, grain matched side-to-side. Available in almost any specie. Pre-drilled and set-up for wall mounting. In the $600-$900 range as seen.
Accessories, furniture pieces, etc.
Ideabooks12
Questions0
Vintage french provincial cabinet, retrofitted for modern flat-screen TV. Required cutting cabinet and mounting flat-screen to wall.
“Duck egg blue chalk paint and wowza” — cindisnyder
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Cabinet dates from around 1700. Some glass has been replaced. Sawing into an object such as this just costs money, I will not offer even a scale until I see the object. This cabinet cost its owner over $25k when it was purchased, 3 days before I cut it up....
Accessories, furniture pieces, etc.
Ideabooks9
Questions0
"Found" cabinet converted into a vanity. Adjusted for height (made a bit shorter) couldn't adjust for depth (to short, sink basin was cut). Drawer was salvaged for maximum usage. Modifications like this cost i the $300-$500 range.
“conversion display” — ccrbee
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Here we see the modified vanity and also the cabinet chosen to act as medicine cabinet. This upper cabinet is considerably older than the vanity, probably late 20th century. It is also almost 11" deep... what you see is the portion NOT recessed in the wall. This cabinet could easily hold gallon jugs of milk. A cabinet such as this, sized correctly to fit between joists but ...More
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Baltimore Architectural Detail "American Primitive" black walnut double vanity. 3 center drawers, could be drawers on either side. Trad height, trad depth, 84" wide. A vanity such as this will cost approximately $5500. Less in softer woods, more in exotic hardwoods.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
These are simple sinks which sit on top of the solid walnut counter.
Accessories, furniture pieces, etc.
Ideabooks2
Questions0
"American Primitive" in Rosewood, 54" wide with chrome towel bar accents. Multiple oil coats, multiple topcoats. A beautiful and highly functional piece of furniture. This version, in an exotic hardwood sans drawers will cost around $4000.
“I like this molding for bathroom” — huron12345
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Audio cabinetry designed and built by us. Delivered in a series of laminate options as an experiment in alternative audio delivery appearance. All SEAS drivers, 3rd order Linkwitz-Riley x-overs. Flat to just above 25hz. Speaker enclosures like this will cost in the $1500 range but the options are ENDLESS regarding laminates, finishes, etc. Courtesy Baltimore Architectural ...More
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
Simple beech / maple wall-mounted desk. Designed to take maximum advantage of available space, includes full-depth over-extension drawer. Size 40" front-back, 6" tall, 66" side-to-side. Includes hidden brackets for support upon wall mounting. A desk such as this will cost in the $1000 range.
Accessories, furniture pieces, etc.
Ideabooks0
Questions0
We offer many types of custom moldings, trims, frames and framing material.
Furniture Pieces, Accessories, Objects.
Ideabooks0
Questions0
Vintage sideboard realizes new life as receiver for hallway and entryway discards. Attached to wall with french cleat, legs added to make it a bit taller.
© 2014 Houzz Inc.
Houzz® The new way to design your home™