1,057 remote blower and custom lighting Home Design Photos

Sullivan Building & Design Group
7 Reviews
Light Farm-Kitchen
Ideabooks14,485
Questions10
is a "remote" unit mounted on the roof. It is not necessary to have a "remote" fan. These units are made with integral fan motors also which are installed in custom cabinetry and simply vented out the side wall or roof.
I love the hood/vent/blower--what brand and where can I get? THank you!
This is a custom hood with an insert and remote blower mounted on roof. Any good carpenter could build this. It is a wood frame around the insert hood and tongue and groove vertical boards with an old beam used to trim the bottom. Crown moulding on top.
is a "remote" unit mounted on the roof. It is not necessary to have a "remote" fan. These units are made with integral fan motors also which are installed in custom cabinetry and simply vented out the side wall or roof.
“hood” — D. Duffie
Venegas and Company
10 Reviews
Needham Kitchen
Ideabooks95,934
Questions134
What type of trim was used on the recessed lights?
it is a light grey yet in the photo it looks off black. Thanks
Maxim Lighting and ET2 lighting have a HUGE selection of xenon and LED even LOW PROFILE under cabinet, tape and pucks to highlight counter space, coves and shelves that you can installs, plug ins and or remote controls for both task and setting the mood as this very clean design pictured here does seamlessly
of our light fixtures from Lucia Lighting & Design, but you maybe be able to source them from your local lighting showroom or online.
Signature Custom Cabinetry built these custom cabinets for us. The perimeter is Signature's "White" and the island and wet bar is Signature's "Ebony". Each has a slight sheen and no brush stroke.
“Paint” — nhughes33
Lee Hardcastle
Kitchen
Ideabooks3,716
Questions4
recessed lighting, integrated appliances, glass splashback, tall cabients to ceiling, tile floor, feature timber grain wine racks with back lit display section.
inline blower can also be added to your main blower to strengthen its power. If you are in the market for a more expensive product, then check out an external blower, which cuts down significantly on potential noise. External blowers are often used in combination with compactible fan products or to create
noise: The blower part of a fan can be located in 3 different areas. Typically it sits in the actual carcass, or body, of the appliance. This is the version that creates the loudest sound. There is also an inline blower, which sits halfway in the duct run, either between ceiling joists or in the attic. If
“Splashback” — bronfahey
$1000 Off Your Complete Remodel Project
(703) 641-9800
Email Us
Minimum purchase of $25,000
Loudoun County Kitchen & Bath Design
Best of Houzz 2014
We are an award winning a remodeling company, focusing on complete kitchen, bathroom, basement & sun room remodeling with home additions & renovations services. Contact us for your next project!
Sponsored
Angela Otten; WmOhs Showrooms Inc
5 Reviews
Portfolio
Ideabooks5,585
Questions6
least 4 blower CFM. Thank you
is the light wood on the ceiling?
liner and blower installed in this custom wood hood is by Dacor. The blower is a 1600 cfm external blower (roof) plus we added an additional inline blower as a booster~ only because the path to get to the exterior was farther than normal. It has a remote switch to turn it on without straining to reach the
Shows dark stove top on light island
“Potfiller” — Kati Foreman Molchan
Landmark Builders
8 Reviews
Landmark Builders
Ideabooks3,358
Questions4
cornices are custom built byu the trim carpenter and house an automated sun control shade.
the light fixture for the dining room
Gorgeous open dining room! Love Love Love high ceilings!! and those windows!! Natural light and
lowered by remote control. When retracted they are invisible and let the architecture take precedence.
Cornice that conceals remote control shade
drapes custom made takes time. For simpler projects allow at least a couple of weeks. For more complex and custom projects, allow six to 12 weeks for your window coverings to be made and shipped to you. Installation of window treatments is typically accomplished in half an hour to an hour for each window
lowered by remote control. When retracted they are invisible and let the architecture take precedence.Cost: Varies greatly. Here are some rough averages, including installation: Shutters: $15 to $35 per square footSheers: $5 to $25 per square foot Shades and panels: $5 to $30 per square foot (double or triple
“Trim around window” — wpkosa
PPDS
Rough Hollow Parade Home 2010
Ideabooks21,254
Questions16
1-Light Mirror Wall Sconce by Candice Olson
Beautiful bathroom. Did you install/hide the remote air blower in the shelving behind the tub? We have a similar design and are looking at this tub. Thanks in advance.
Supplier of Custom Handmade glass/marble mosaic patterns. MEC guarantees you the best quality and lowest cost. We do custom designs as well, if you have your own designs just send us for free estimate. We also have other brilliant ideas which we can share with you.See our photos on houzz and please contact
Torch lights are beautiful and dramatic though not fussy
“wood counter” — meimei168
GEORGE Interior Design
5 Reviews
Strand House
Ideabooks3,165
Questions6
has a custom slipcover on it. It was custom built for this client.
These are semi-sheer roller shades by Lutron. We built custom pockets to conceal the rollers which are all automated.
Hidden remote-controlled rolled shades for odd-shaped windows
remote control into a custom-designed pocket to hide and allow unobstructed views.
up by remote control into a custom-designed pocket to hide and allow unobstructed views. The problem of covering the unusually shaped window was solved by letting the panel overlap a portion of the wall, which can be an effective solution on any size or shape of window. motorized remote-controlled shades
Like the window shades. It hides the bright light, but still get the sun light
“White and Blue” — lzubowski
Angela Otten; WmOhs Showrooms Inc
5 Reviews
Portfolio
Ideabooks37,331
Questions26
From where was the pendant light purchased?
What brand is this subway tile? Is it a blend or custom? Where can you purchase it
Dear Angela, Gorgeous kitchen. I have a lighting question, though. In our home we have a dining room connected to the kitchen/breakfast nook/great room, in a semi-open style home. Do I need to make sure that all of the light fixtures are related to each other?
There is a remote switch for the blower for ease of reach.
It is a custom door with a custom stain finish on alder wood. Thank you!
the lighting fixtures should work with each other in style and/or finish if within viewing distance of each other.
Pendant lights. Where are they from
must be custom William Ohs. I would love a closer look to see the detail so I could copy them, both the white and dark brown island cabinet styles. Can you provide any information on wood, color, glaze, or a similar door style available? Thank you for any information you could provide to help me get
“Great hood. Like the height of it.” — cegardner5
© 2014 Houzz Inc.
Houzz® The new way to design your home™