Unlock the entire Houzz
2,622 vein cut travertine Home Design Photos
Honing stone (or porcelain, for that matter) cut edges can produce a match to the finish of the face, though the cost in labor
This paint color all wrong to go with travertine. Needs be lighter or darker in tones of the travertine. Pretty window
Nice creamy travertine tile. Not crazy about the gray they picked, but another gray could be
Shelf cut out in bathroom & wall between vanity&toilet
Northern Virginia Shower Glass and Mirror Designer
ABC Glass and Mirror, Inc. is a family owned and operated business with over 40 years of owner industry experience and over 150 years of combined experience.
USI Design & Remodeling
Dallas bathroom remodel
shower in our guest bath..we are updating the flooring and wall tile to travertine and our contractor thinks we should remove the glass block and put in
cut out over shower for ventilation
Is this travertine?...travertine tile floor wall...Wall cut outs...It's a light Travertine
Pine Mountain Builders, LLC
Hello, Is the floor also travertine? Thanks.
color you like. Start by "cutting" the paint with water ( as long as it is water based paint ) and apply to the board. Keep cutting the paint until you reach
The counter top shown is travertine (limestone).
Cut with water? More water more opaque look.
Archipelago Hawaii Luxury Home Designs
Paiko Lagoon Oasis
is that travertine on the floors and walls?
cut out in half wall dividing sink and rest of bathroom
make a cut out for toilet paper and wipes... like a shower one but for the toilet
Like the idea of knee wall having cut out for bottles, cup etc.
Yes, that is travertine.
Gina Bon, Airoom Architects & Builders LLC
Sullivan Master Bathroom
tiles look like 2x2, 3x6 and 6x12. I can't find 6x12, only 12x12. Were they cut and the edge sanded?
are 12x12 in a brick pattern and 6x6 in a brick pattern. The tiles were not cut to size in the field and the edges are rough looking because the marble was
Cut out pattern...travertine floors...travertine in shower
Kitchens By Julie
the cabinet doors prepped for glass but dont get the glass. Cut the wire sheets for the door cut out. Use the same plastic seal for the glass doors to seal
The flooring is travertine a natural stone.
What kind of floor was used in this kitchen? Travertine? Any details on the floor would be great. Thx!
Looks to be Travertine, a Versailles pattern.
Cut of the island counter top
John Malick & Associates
Mediterranean Equestrian Estate, Carmel, California
products with uniform color, veining, etc. Always inspect them in person before purchase, keeping in mind how the slab will be cut before final installation
The marble slabs were 3/4" thick (2 cm). We reviewed and approved the cutting of the slabs to ensure the matching you admire, relying also on the talent
The rock was quarried and cut in Mexico to the design of John Malick & Associates, with additional finishing
Carolina Design Associates, LLC
What is the width of the drawers where marble is cut back?
that the depth of the vanity is 23". What is the depth of the cabinet that cuts back and attaches to the shower. Also, what is the height of the vanity
look beautiful. You will have some if you choose marble that has some veining it is not noticeable unless you look for it. See attached photo. I went
yes, the edge is ogee. The cabinet cuts back to about 21" deep. The height is 36" tall. The backsplash is 4". Glad
Knobs? Are they Hex or Diamond Cut? Where are they from. Agonizing over which for my walk in closet. Love
ller have to be on the same page in terms of light placement. A hole is cut in the mirror in the exact same spot where the electrical boxes are located