150,858 warmlyyours1 Home Design Photos

Kimberly Niesz
Niesz Vintage
Ideabooks13,691
Questions10
white, white, 39 1/4x14 3/4x93 1/8 " -
How did you attached the 1" trim?
They are 93 1/8" tall. We have 8 foot ceilings, so we had just enough room to add the crown molding.
Pax ikea closet doors 39 1/4 x 14 3/4 x 93 1/8 plus crown molding for 8'ceiling
Pax Ikea 93 1/8 tall with 8 ft. ceilings and they had room to add the crown.
“Mint wall...white trim...so fresh!” — aself87
Loudoun County Kitchen & Bath Remodeler
We are designers and builders of home additions and renovations throughout Northern Virginia. Our team of designers, craftsman and builders have been in business for over 27 years.
Sponsored
Zieba Builders, Inc.
8 Reviews
Organic Inspirations
Ideabooks17,209
Questions19
What is the placement of the handles on the cabinets? Are they about 1.5 inches down from the top of the cabinet door? Is there a rule of thumb? Thanks so much!
The tiles are 1"x1" crackle mosaic gloss, light yellow/brown. They were purchased at Bedrosians Tile and Stone.
overflow: 2nd floor Washbasins #049112 http://www.duravit.us/website/homepage/products/product_overview/series/2nd_floor.us-en.html/p-91419 Width: 47 1/4" Inch Duravit's website has a "find a retailer" link: http://www.duravit.us/website/homepage/service/find_a_retailer.us-en.html;jsessionid=07E73E90
bathroom vanity 1 center sink w/2 banks of drawers-his & hers
Here we go 1 sink long vanity full mirror
“mosaico” — valemor
Knight Associates
A new Maine "cottage"
Ideabooks11,359
Questions12
We offer many country floral rugs if you would like further assistance in your search1
Betty- we used 1x12 inch pine boards, painted.
a custom tint with Ben. Moore Grand Teton White as the base (it was lightened a bit, but this was done on site so there isn't a formula). These are 1x12 pine boards (no tongue and groove)- yes you would nail them into the wall studs. Furring strips, or solid blocking would be needed it you won't be
Thank you for the kind words. The boards are just 1x12" plain boards (no tongue and groove, etc.). I'm not sure exactly where the contractor sources them from, but you can probably find this size board
Walls. 1"x12" pine boards. Potential problem of joining planks
1x12 pine board walls no T&G
“Wall” — bspivey
Turan Designs, Inc.
12 Reviews
Teri Turan
Ideabooks26,672
Questions19
Does anyone know the color of the trantrum glass 1x1 in this picture. It's not adobe since adobe looks to light for this.
2/4 x 12H Heritage copper This is by Sonoma Tile and you can google where to get it Mosumrema Now 1 x 1 mesh mosaic color Adobe Escape 1.5 x 8 v cut piece in Adobe Tanturm glass Stellar Kristie 1 x 1 heritage copper embarcadero liner 3/4 x 8 Heritage copper And This copper trim: Van Ness .5x8 heritage
“Backspash” — ivakhraneva
Lake Country Builders
8 Reviews
Lake Country Builders
Ideabooks110K
Questions41
Shangai Mosaic Accents 1 1/2 x 1 1/2 (12 x 12 sheet) CTW
Vanity and 1/2 Wall Top 3CM Granite Pompeii
Thank you for your inquiry. The dimensions of the tall cabinet are 8'h x 24" d x 1' w.
These sconces are from Kichler Lighting. http://www.kichler.com/products/product/wall-sconce-1lt-oz-5076oz.aspx
Accent Tile-Boarder and 1/2 Wall
bathrooms 1
“High sink cabinet. Brown tones. Glass door shower. Tub in a raised frame.” — algephart
Crisp Architects
43 Reviews
Game Room
Ideabooks2,842
Questions2
0sha requirement = 1 1/2 inches
space. If you plan to use copper pipe for railings, remember that Occupational Safety and Health Administration standards require a minimum diameter of 1½ inches.
space. If you plan to use copper pipe for railings, remember that Occupational Safety and Health Administration standards require a minimum diameter of 1½ inches.
“Stairs” — ritamichaelides
NVS Remodeling & Design
12 Reviews
Gorgeous Kitchen Remodel
Ideabooks7,148
Questions17
The island is 66" long, and the top is 79 1/2” x 37 1/2”. Hope this helps and thank you for the question.
Hi Barbara, the granite is 1 1/4" thick.
Thanks for the question. The tops are White Spring granite with 1/2 bullnose edges.
Hello! It is White Spring with a 1/2 bull nose edge.
tops are White Spring granite with 1/2 bullnose edges.”
this granite looks to have a 1/4" rounded top and squared off bottom edge
edge finish, I like this less than the 1/4" rounded top AND bottom
“Kitchen granite” — christis42
Fiorella Design
13 Reviews
San Jose Res 2
Ideabooks430K
Questions247
We're thinking of using a 1x4 natural stone in our kitchen but I'm having trouble finding photos to convince me that the 1x4 won't look too long and skinny.
What is the price tag on a kitchen like this but about 1/2 the size? I am in need of remodeling my mother's kitchen and wonder if this is even possible. Do you work in the Fresno area?
I've actually seen this very same tile at The Home Depot for $1.99 per sq ft. They have several shades, lengths and textures
Maura, Do you still have the 2 1/2 cases left? My wife and I are doing a kitchen remodel and are very interested in your Walker Zanger tile.
“Floor” — shueree
© 2014 Houzz Inc.
Houzz® The new way to design your home™