184,062 warmlyyours1 Home Design Photos

Xstyles Bath + More
4 Reviews
Feng Ciao
Ideabooks83,070
Questions17
bench about 5" and the final 1" overlap onto bench using a paintable membrane such as TEC Hydraflex. When tiling, leave an 1/8" gap between the top of the
the wall at the front edge of the bench. We notched all studs, no more than 1/2", sides and back. Had a problem notching out corners where the 2x4's came
4" angle grinder on corners of bench to get the best fit possible. Remember 1/4" per foot pitch. Slip bench into place, no adhesives, screws, nails, etc
Long tiles on 3 walls and square tiles on 1. Nice effect.
New Bedford limestone. 2 1/4" thick.
“Sleek” — omietorres
Monmouth County Premier Interior Design & Furniture Firm
Space Interiors has been providing furnishing solutions and design services througout New Jersey, Brooklyn and Manhattan, NY for over 15 years.
Sponsored
Crisp Architects
47 Reviews
Crisp Architects
Ideabooks170K
Questions175
Looking for Island post legs like this at 34 1/2 inches high , could you tell me who makes them/ where to find them. Thank
This RK International - 880 P $17 for the 3 1/2 in size
seated). Meanwhile, an extra-thick honed Mother of Pearl quartzite top has a 1-inch overhang that protects the cabinets below.Custom cabinetry: JEM Woodworking;
The stiles are approx. 1 1/4" wide.
“Floor” — marlenepower
Michael Abrams Limited
22 Reviews
Seeley Living Room A
Ideabooks190K
Questions224
wainscoting. The ceiling I was going to use Kelly Moore's lovely lace (OW255-1). But after seeing the white linen you use I'm wondering if I should use that
Shaker Beige on entire 1st floor and stairwell?
Those look like standard 7 1/4" box newels at the bottom (could be the 6 1/2" as well) and may drop to 5" newels as you go up.
What colors are on the walls and ceiling of this room? Is 1 of the Benjamin Moore mascarpone?
“Paint colour” — bartneea
Group 3
9 Reviews
Low Country Cottage
Ideabooks18,390
Questions26
just wanted to confirm that it is matte 1" hexagonal tiling with medium-gray grout? You mentioned that the 1st round was not flat and needed to be ripped
also has 1" hexagon tile and is available to order in any of our over 300 colors. We can also create custom blends for your project.
questions in a place I've never looked before! I'm very sorry for the delay. :( 1x8 V-groove pine, primed on all sides and painted with a semi-gloss enamel paint
hex with a medium gray grout. Many of the little hex tiles in the 1st go-round weren't exactly flat and the entire floor had to be re-done. We were told
1 in white hex tiles, matte finish
“Tile treatment” — jprince75
Synergy Design & Construction
8 Reviews
Ashburn Contemporary Basement - Pool Area & Bar
Ideabooks39,332
Questions23
them from us by phone. Please call our sales desk @ 215-925-4800 or 1-800-STOOLS-1.
thanks for the compliment! The total square footage of this basement is about 1,535 sq. ft. (of course there are other rooms you can't see here). From the
recently dis-continued however Triangles has two 8' models still available, 1 in the maple laminate and another in the black laminate, please visit ....
This is it all we need to add is the Multi Media Room/Study, 1 bed rm and bathroom and a small kitchen area
“This is it all we need to add is the Multi Media Room/Study, 1 bed rm and bathroom and a small kitch” — antsy1
Kayron Brewer, CKD, CBD / Studio K B
14 Reviews
Master Bath Retreat
Ideabooks210K
Questions107
vanity. I went to Wood Harbor's website and they have two heights 34 1/2 and 31 1/2 and the towers show 30 and 36 inches. Any help would be appreciated
I can't see the detail in the photo to tell if backsplash is 1/2" x 1' crema marfil?? What grout color did you use? Thanks
work to "blend" the tiles across the room or would I be better off to use a 1x1 hexagon on the splash area and in the shower niche? Your thoughts would be
The base cabinets are 34.5" (Kitchen height) and a 1.25" (3 CM) marble.
“Simple” — kwynstra
Coates Design Architects Seattle
23 Reviews
Point White Residence - Exterior
Ideabooks1,401
Questions1
I've tracked down a Vicwest commercial metal roof that allows 1/4"=1'-0" but am looking for some alternatives as well. Thanks!
slope is 1:12 - use a taller seam standing seam roofing product
e.g. shed roof @ 1:12 slope...Simple 1 & 2 storey sections....1/2 brick 1/2 wood
“love the materials and color” — tlagestee
Carla Aston | Interior Designer
12 Reviews
Master Bath Remodel
Ideabooks110K
Questions60
The back splash looks like it is travertine in 1" x 1" mesh. Color may be ivory light, baja cream, Torreon, or another light color
It's just a 1 x 1 travertine mesh mount mosaic. Many different manufacturers have this product
thank you carla.. heading to 2nd stone yard this saturday. 1st one had nothing but all dark colors..keeping my fingers crossed.. the one
It's a 1 x 1 tumbled travertine.
“Use of baskets” — cjayjr
© 2014 Houzz Inc. Houzz® The new way to design your home™