Houzz is the new way to design your home.
147,991 warmlyyours1 Home Design Photos
newton residence 1 - dplk.01
review. : newton residence 1 - foyer - dplk.35 : View of the foyer as you enter the home newton residence 1 - foyer - dplk.32 : View of the interior millwork within the Foyer newton residence 1 - foyer - dplk.33 : View of the interior millwork within the Foyer newton residence 1 - foyer - dplk.34 : View
within the Foyer newton residence 1 - balcony - dplk.38 : View of the second floor hand railing newton residence 1 - balcony - dplk.43 : View of the second floor balcony area newton residence 1 - hallway - dplk.44 : View of the of the stairway off the main hallway newton 1 residence - great room - dplk.51
All of the exterior photographs published on houzz are listed under newton house 1. http://www.houzz.com/projects/8657/--newton-residence-1 I do not have any other photographs to publish at this time.
Smith & Vansant Architects PC
Yes, simple flat stock painted poplar, but the head casing is 5 1/2" and the side casing is 4 1/4", while the baseboard is 7 1/4" tall.
This is a standard 1 x 8 poplar, which finishes out at 3/4" x 7 1/4".
baseboards This is a standard 1 x 8 poplar, which finishes out at 3/4" x 7 1/4".
Baseboard standard 1 x 8 poplar, which finishes out at 3/4" x 7 1/4"
7 1/4" baseboard. Better for higher ceilings. But this is just a flat squared look.
and we provide countless styles/options. It's difficult to name out a price--it all depends on exactly what you choose. Feel free to give us a call at 1 (800) 873-5673 and we'll be happy to assist you. Also, visit our website at www.nanawall.com ____________________ About NanaWall Systems NanaWall Systems
to open the entire door. Cost: Folding glass doors can be pricey, especially the better ones that are easily operated. You should budget about $1,000 to $1,500 per lineal foot. So a 20-foot-wide opening would cost about $20,000 to $30,000.
to open the entire door. Cost: Folding glass doors can be pricey, especially the better ones that are easily operated. You should budget about $1,000 to $1,500 per lineal foot. So a 20-foot-wide opening would cost about $20,000 to $30,000
What size are the cabinet knobs? 1 or bigger?
1-1/4" knobs. In my opinion, the 1" knobs look a bit small unless it is a small door or drawer.
The mirrors are standard plate glass mirrors with a 1" bevel edge. They were made by a local glass manufacturer (quite inexpensive). The painted wood panels around that match the cabinetry sit proud of the mirror by about 1/8". At the bottom they sit on the 4" high backsplash ledge.
produced by the millworker. The stone overhang is 1.5" and protects it from water drips.
It is an 1.5" ogee built up edge.
The length of the vanity is 9'-4" long overall. The storage towers at each side are approx. 1'-4" wide.The vanity/sink portion of the base cabinet is 22 deep". It steps back slightly at each side where the drawers are to 19.5" deep. The towers
Design Cube Inc.
Powder Room Renewal -
Wondering if the bottom baseboard is 1x6 and the top 1x3? Are the horizontal pieces 1x4? Any information of the sizing of the molding would be greatly appreciated.
3’ – 2 1/2” x 4’ – 4”
The millwork was installed first, allowing for 6" inches of tile border, plus 2/8" for grout above and below the tile (1/8" each). A very small bead of acrylic caulk was added
The wainscoting is just 1 x 4 with a cove molding inside each square. The flat inside panels are either wall board painted to look like they are wood or they are flat top grade
Cameo Kitchens, Inc.
MacGibbon Kitchen 3
Art for Everyday Turned Posts # F-1; Art for Everyday Corbels # CBL-TCY1, Beadboard; Wood Mullion and Clear Beveled Glass Doors; Bar Area; Double Panel Doors; Coffered Ceiling; Enhancement Window; Art for Everyday Mantels # MTL-A1 and # MTL-A0; Desk Area Cabinets- Main Kitchen:
Tumbled Mosaic Straight 1 7/8" x 1 7/8" Bronze Flower
Golden Beach. Backsplash Tile: 4" x 4" x 3/8" Seashell Tumbled Marble Seashell Pencil Liner Moulding 2" x 2" Seashell Tumbled Mosaic Straight 1 7/8" x 1 7/8" Bronze Flower Purchased at Marble Systems http://www.marblesystems.com
The ceiling is a little over 9 feet high. The upper cabinets vary- the ones to either side of the range are about 3 1/2 feet high.
New Old, LLC
beadboard - most lumber supply houses carry these. The 2 1/4" size is still oversized (from the 1" or 1 1/4" versions you find in the DIY hardware type stores) and also has a nice deep bead. Good luck!
actually 3 1/4" wide which you can have custom milled by the plank or buy in mdf panels. The only vender that I have found that carries this size beadboard in panels local to Charlotte is ITC Millwork in Indian Trail, NC. An easier option with a very nice look is to buy planks with the standard 2 1/4" beadboard
beadboard - most lumber supply houses carry these. The 2 1/4" size is still oversized (from the 1" or 1 1/4" versions you find in the DIY hardware type stores) and also has a nice deep bead.
Low Country Cottage
all of the answers to the other flooring questions within this thread, but I just wanted to confirm that it is matte 1" hexagonal tiling with medium-gray grout? You mentioned that the 1st round was not flat and needed to be ripped out - how do you avoid that from happening? Thank you so much! Rhea
Pratt and Larson Ceramic also has 1" hexagon tile and is available to order in any of our over 300 colors. We can also create custom blends for your project.
It's a 1 inch hex with a medium gray grout. Many of the little hex tiles in the 1st go-round weren't exactly flat and the entire
looks like a Kohler Kathryn http://www.us.kohler.com/us/Kathryn-Comfort-Height-one-piece-elongated-1.6-GPF-toilet/productDetail/product:420968/420968.htm;jsessionid=3D063BFA3536DD4363053224CC25E356.kohler-prod1-ecom2?skuId=369129&categoryId=430125 The pedestal sink also looks like it is in Kohler's Kathryn