2,744 wind powered building Home Design Photos

Sullivan Building & Design Group
7 Reviews
Light Farm-Kitchen
Ideabooks16,284
Questions11
This is a custom hood with an insert and remote blower mounted on roof. Any good carpenter could build this. It is a wood frame around the insert hood and tongue and groove vertical boards with an old beam used to trim the bottom. Crown moulding on
of the range's width, they'll also have a bottom panel where the power pack is installed. You'll need to either choose a noncombustible material for the bottom panel or move the hood fan up accordingly. Any good carpenter could build this. It is a wood frame around the insert hood and tongue and groove
beadboard paneling and antique wood beams. This power pack has been combined with an external or remote blower. The external blower isn't visible here, which is a beautiful solution with the simple face and wood trim. A custom unit above a sealed gas-powered stove typically requires 42 inches of clearance
“Hood” — mavfamily
Award Winning Northern Virginia Custom Cabinetry
Custom cabinetry, built-ins, home entertainment centers, custom closets, wine rooms/storage, home offices, libraries, and bars.
Sponsored
Tim Kriebel - KRIEBELDESIGN
1 Review
Custom Contemporary Kitchen
Ideabooks44,678
Questions12
Who makes the power strip and can it be inset in a channel in the cabinet?
Thanks. I don't suppose you are anywhere near NJ to build this for me????
This is an appliance garage on a grand scale. Anything that keeps you from having to haul appliances out and then wind up their cords and put them away again makes it easier to keep the kitchen clean. And why stop at using doors for appliance garages ...
Rolling cabinet doors would be a good way to cover up power wires on the wall in basement exercise room
Appliance storage. This is an appliance garage on a grand scale. Anything that keeps you from having to haul appliances out and then wind up their cords and put them away again makes it easier to keep the kitchen clean. And why stop at using doors for appliance garages ...
“Hidden appliances” — woolysnowballz
Scheer & Co.
Workspace
Ideabooks3,824
Questions3
Hi, your office space looks very nice. I need to build mine and trying to figure out how I can do it within my budget. Did you get this table top and a leg from IKEA? How did you mount the table to the wall? Did you make a hole on
cords with Velcro and attach power strip to bottom of desk
Mount power strips under or behind the desk
Mount power bar on the underside of
run the cords from the bottom of the table leg to a power strip, using more Velcro to keep them together. In this desk, the powerstrip was attached to the bottom of the desktop. "
router, power bricks, etc, mounted to underside of desktop.
inside of a table leg. From the front and side, the wires won't be visible. From there, you can run the cords from the bottom of the table leg to a power strip, using more Velcro to keep them together. In this desk, the powerstrip was attached to the bottom of the desktop. If you come across a ball of
“Bold color” — Robert McCoskey
AR Design Studio Ltd
5 Reviews
The Boat House
Ideabooks1,624
Questions0
Ramus wanted to keep the landscaping as natural and undisturbed as possible. This boardwalk winds its way to the main house. The path "creates a journey through the landscape," he says. The lakehouse itself has a very minimal amount of contact with
plain white metal building with landscape
boardwalk, building on stilts doesn't disturb lake bottom
Ramus wanted to keep the landscaping as natural and undisturbed as possible. This boardwalk winds its way to the main house. The path "creates a journey through the landscape," he says. The lakehouse itself has a very minimal amount of contact with the landscape, almost floating above the ground.
Ramus wanted to keep the landscaping as natural and undisturbed as possible. This boardwalk winds its way to the main house. The path “creates a journey through the landscape,” he says. The lake house itself has a very minimal amount of contact with
“White roof?” — Natalie Benz
debora carl landscape design
15 Reviews
debora carl landscape design
Ideabooks18,651
Questions9
Would this fence hold up to high winds? Would it get very hot?
We live at the mouth of a canyon, which causes high winds. We also live in a desert area so it gets hot. Do you feel this would be a good privacy fence and would
Do you have a plan that you can post so I may build this in Texas?
heat in the summer. If you use new metal, you could wipe it down with muratic acid to take away the shine. Commonly used metal is applied. It is as wind resistant as any fence would be. No more, no less.
Galvenized roofing fence panel. Great wind break
and cold, but whimsical grasses make them come alive. The vertical line of the grasses echoes the line of the ribbing but moves with the wind. Also notice the bright green ground-hugging plants on the wall's top and bottom.
“Fence” — Inhabit Seattle with Tara Farquhar-Hagen
Robeson Design
13 Reviews
Christmas Decorating like a PRO
Ideabooks3,559
Questions4
Benjamin Moores Wind Chime AF465 to see a video of my Christmas home tour watch: http://www.youtube.com/watch?v=pLeUDrBCeHo
Wall color is WindChime AF-465 by Benjamin Moore. For more on my home watch the following YouTube videos:
Wall color is WindChime AF-465 by Benjamin Moore chandelier
walls= BM Wind CHime
wind chime...TV build in
“wind chime” — fox66
vendrolini
Garden Studio
Ideabooks5,511
Questions3
connection to the greenhouse. Design note: A level foundation is necessary prior to building, whether a sturdy deck or patio, or a simple perimeter foundation. Securely anchoring your greenhouse against heavy winds or other inclement weather is essential. Be sure to confirm which tie-down method is
Lights, greenery, windows, and new cedar colored wood. Could do this by the tree w/ the rocks around it, by the garage. Build up the yard, steps down to the parking area?
Combo of kit and custom build
When building a prefab studio proved to be too much on his San Francisco yard's steep site, this clever designer went with a greenhouse kit instead. The small structure
prior to building, whether a sturdy deck or patio, or a simple perimeter foundation. Securely anchoring your greenhouse against heavy winds or other inclement weather is essential. Be sure to confirm which tie-down method is advised for your structure, foundation and climate.
“the lamps” — Aparna Pujar
South Park Design Build
9 Reviews
Modern Toronto Home
Ideabooks1,964
Questions1
pros. A well-stocked bar, such as this crisp blue entertaining space by South Park Design Build in Toronto, would require an architect or interior designer to design the space and a contractor to build it. The building crew might include a carpenter to construct custom cabinetry, a plumber for a sink and
A well-stocked bar, such as this crisp blue entertaining space by South Park Design Build in Toronto, would require an architect or interior designer to design the space and a contractor to build it. The building crew might include a carpenter to construct custom cabinetry, a plumber for a sink and
pros. A well-stocked bar, such as this crisp blue entertaining space by South Park Design Build in Toronto, would require an architect or interior designer to design the space and a contractor to build it. The building crew might include a carpenter to construct custom cabinetry, a plumber for a sink and
“Bar” — mcortesv33
© 2014 Houzz Inc.
Houzz® The new way to design your home™