Software
Houzz Logo Print
captsmethwick

Need advice on a new washing machine

14 years ago

We're in the market for a new laundry set - particularly the washing machine. We had a Kenmore HE3t set and hated dealing with the frequent reoccurence of mold (and the resultant smelly towels, etc.) and so my wife is very wary of front load machines. Within the next month, we're prepared to pull the trigger on a good quality top load set and price isn't really an issue but would prefer to spend less than $3k for the set.

Our challenge is that we both prefer the advantages of front load (capacity, energy/water use, and gentleness on clothes) and would definitely consider one provided that we were certain that it was significantly better at dealing with mold than the Kenmore set was.

We're open to all recommendations of top and front load machines - provided that there was a reasonable expectation that the FL models would be better dealing with mold. Also, our laundry room is on the 2nd floor so vibration control is a must. We're also partial to Miele and note that Miele Canada is having a $1000 off promotion for a W4802/T9802 FL pair but we have nothing independent about how its design would be better at preventing mold buildup than others.

Grateful in advance.

PS - in the early days of our FL, we weren't diligent about mold prevention techniques and are certain that this was most of the problem - but, after a few years, it's become a PITA. We're also aware that there's a class action suit underway related to this problem with Kenmore FL machines - which we have no intention of joining. IOW, we're definitely looking in the mirror here but my wife just has lost confidence in FLs.

Comments (6)

  • 14 years ago

    Suggest posting on "laundry room" forum.

  • 14 years ago

    Thanks - will do.

  • 14 years ago

    Yes, please visit Laundry Room Forum. I am a regular contributor, and there are AMAZING, friendly and really informed people there. There A LOT of Miele fans, I being one of the biggest. I have had a Miele front loader for like 15+ years (several models), and I have NEVER had one issue of mold or mildew! The key to never having mold or smelly laundry is so simple and basic. When the wash machine is not being used, NEVER close the door all the way (always keep it ajar). And wash in warm, hot and sanitize water for all loads. Even delicate or fine items do perfect in warmer water. Washing in cold, does not allow skin oils to break down, and detergent enzymes are most effective in hotter water. Keep the soap tray clean and rinse of built up softenere. You'll be fine.

    Btw, Miele electric dryers perform better than their only gas version!

    The build quality of Miele is amazing!

  • 14 years ago

    I had a "musty smell" with our FL Whirlpool Duet (came with the home, 6 years old now) and I did a little reading to figure out a fix.

    - I cleaned out the filter trap. Not really dirty.

    - Ran a load with white vinegar, hot water. Still a bit musty so then ran a load with Borax powder soap. Smell gone for last 6 months.

    - I always leave the door open and don't use cold water wash.

    - I see WP pushing a "special cleaning" soap for the FL machines. A bit expensive and waste of money compared to just running vinegar or Borax soap.

    - I was using liquid soap (cheaper) and not the special "HE" soap. I did catch Tide HE powder on sale at Target and tried it. Wife likes Tide better than the cheap soap I was buying so when she is around I use that. When she is gone I use H&A liquid. Always on sale at WM. I don't notice any cleaning difference and finally got my wife to admit she just likes the smell of Tide.

    Tide recently went to a new formula for their powder soaps which are suppose to be "better" and require less soap. Have not tried them yet. The cost is higher too.

    An article in the NYTimes a few months ago talked about how Americans have a tendency to use too much soap when washing clothes. I've played around with the amounts to use, brands, etc...

    Also, the WSJ had an article talking how 15 years ago all the top loading washers did a great job and the FL (at that time) failed. Now the majority of the washers are FL with few TL available. The FL sell themselves as "saving water/electricity" as the most important feature.

    I looked at the new washers at Sears and like one new TL machine that sells itself as the same efficiency as the FL. I would like a new machine (when this one breaks) that is about 4.3 cu, our current model is 4.0.

  • 14 years ago

    totsuka writes: "Also, the WSJ had an article talking how 15 years ago all the top loading washers did a great job and the FL (at that time) failed."

    The Wall Street Journal was wrong, if that is what it said. Consumers Union, publisher of Consumer Reports, has been testing washing machines since, like, forever, and right through the 50s, 60s, and 70s -- the years when I hung on every word -- whenever CU's washing machine test suite included both front loading and top loading machines, the front loaders usually were at the top in cleaning ability.

  • 14 years ago

    Watch this video before you decide.

    Here is a link that might be useful: Frontload laundry lawsuit

Sponsored
SK Interiors
Average rating: 5 out of 5 stars55 Reviews
Loudoun County's Top Kitchen & Bath Designer I Best of Houzz 2014-2025