Software
Houzz Logo Print
gwer2007

Brick to stained concrete transitioning

19 years ago

We have just had two rooms scored/stained after removing the carpet. The floors look fantastic. There is only one problem, however. The hall between the two rooms and the bathroom (that has an entrance from the hall as well as one of the bedrooms) have brick floor. I don't know why, the house came with it but "everybody" likes it. Right now, the brick surface and the stained concrete floor are "flash" (same level) but the transitioning looks sort of "rough" as the joint is uneven and the grout line is not pretty. Also, those "boundary" areas have patched holes and little spots that did not take the stain the same way as the rest of the floor (we discussed it with the guy who finished the floors).

I have asked my carpenter if we could put some thin wood thresholds but he says they'd either stick out or would break if too thin. The floors are stained light black color, so white marble threshold would be too visible and would look strange next to brick, I think.

What else can we do? If there is a remedy, how is attached to those surfaces? Any suggestions are greatly appreciated!