Diagrams needed.

What?

Sophie wants a drawing done to actual scale and with measurements. Along with how it fits in the room (surrounding items shown with dimensions).

If you can’t draw it, you can’t do it.

Sorry Sophie. I'm out of the house due to renovations and had connectivity issues. I'm uploading a picture of the peninsula (long side and short side) and an overall layout for the kitchen. The issue is the left side cabinet under the long side opens under the peninsula, and the right side cabinet open on the side without the overhang. So I hang hang brackets on the right side cabinet back, but am concerned about the space between bracket at the very end of the left side which will be attached to the wall. It's then 24" until the back of the right cabinet.

Sorry -for the duplicates - this is the short side panel that will have a corner angle bracket and no issue because all brackets can be affixed to the back of the cabinet below.

This is a copy of the long side of the peninsula, where the cabinet opens under the underhang. The far left will have a bracket mounted to the wall. Any way to have a bracket before the 21" cabinet that is next ends?? with a 3" filler I'm worried that with such a deep overhang its weak to go so long without a bracket.

Thanks,

R