the height looks great to me, when you look at the grouping, the middle should be eye level and that looks to be the case. to me the pieces should be a bit closer, to me. its ok if there is more blank space to the sides, you can think of it as that you can add more frames over time.

https://studio-mcgee.com/2017-4-6-hanging-art/

when you say the middle should be eye level - the middle of what? Of the bottom row of frames?

Right now i have different lengths in between the top & bottom frames. This should all be the same right to look cohesive? Im think 6” all around?

Your home is looking lovely. I hope you are enjoying it. Agree with 2-3" between all the frames. It will loom more cohesive

when you look vertically, the top of the bottom piece should be eye level. to me 6 in is too far apart, can you retape so there is 2 to 3 inches just to see. I would bring the top row down and leave the bottom row at the height it is, but move them closer on the sides. i get there will be more empty space on the sides but I think that's ok.

Try it with 3" between the frames, both horizontally and vertically. The middle at eye level means that the middle of the grouping of frames is eye level, so an average sized person standing at the frames is looking directly at the 3" space between the top and bottom frames.

Okay this is roughly 3.5”.

much better.

Okay so we all think this looks okay? 3.5” in between.

looks good to me

Hi! We are getting ready to hang our dining room chandelier (finally) and trying to make sure we get the height right! Is there a guideline here? We went with the orbit chandelier

Also heres our updated gallery wall! I think in a year ill swap for B&W pics

The wall looks great! The general rule of thumb for hanging the chandelier is having the very bottom of the chandelier 30 to 36" inches above your tabletop. With your high ceilings, I'd skew more toward the 36" range. Have the electrician hold it up in that range and they can make an adjustment when you stand back and look at it.

gallery wall looks great. how
exciting with the new dining chandelier.

This is 36” above the table which we had to move to install. Hubby is my electrican lol, how does this look? We havent put the crystals on yet

how exciting, looks the right height to me... will be gorgeous

As long as the very bottom of the light is 36" from the table, it should be fine. No crystals hanging lower, right? The table height may be an inch or so higher once it's fully on the rug. The room is looking great!

you guys, it looks so gorgeous!!! I'll take a photo later once we move the table back under. Next to finish the walls.

Photos! Now any suggestions for wall art/what to do with both walls and window coverings?

You have such beautiful moldings and trim that I'd consider leaving the windows bare, especially if this is a side yard view. If it looks out the front of the house, you may want drapes on a rod, mounted just under your crown molding to hang within the alcove. I'd look for white or a natural color that matches your walls.

Transitional Sunroom · More Info

Choosing artwork for the walls is very personal and subjective, but that is your place to add personality. I would use a large framed mirror over the console with a gold frame and three large colorful pieces of art on the back wall, with deeper colors. Smaller art pieces on the wall with the doorway that we can't see in the photos. Look for art that is meaningful to you in some way, or pieces that you really love.

wow. the chandelier is absolutely stunning. just love it. I would keep window treatment simple and do just blinds that start at the top of the window under the arch, like the pic below, if possible. I can't tell if the window has something to drill into for the blind. if possible. a blind will allow you to see all the trim around tne window. for art, I would start with one very large piece above the console, perhaps a large square piece...

Summer Home on Martha's Vineyard · More Info

one thought... black and white photography throughout the room. large white mats with black frames, all the same size. i think black and white photography would bring a unique feeling to the room

i like the idea of drapes on a rod, simple, but not sure there is a place to mount it with all of the trim, have to ask hubby that. If not, i would just do a simple shade, probably something plain and neutral?

Art is always super tricky for us, but I'll browse around a bit. Do you think a large rectangular mirror? or a different shape?

I'd stick to a rectangular mirror since you have the round light fixture. For the drapes, the rod can be mounted on the drywall to each side of the window, inside the alcove, with extension brackets so it clears the window trim. Imo blinds will block too much light and view unless you did individual roller shades mounted inside the two windows. Do you need light/privacy control or is it just for aesthetics?

yes so i forgot to mention the dining room is in the front of the house and faces the street, so we do need some privacy control!

Do you mean here for where to mount a rod?

What about doing a sheer on the inside like we did with our nursery?

No, I would mount the rod higher on the drywall, just under the ceiling crown molding, so it includes the arched window as well, like the example photo I posted above. I think that would look more sophisticated. I'd use a rod with flat ends so you can go as wide as the alcove so you have room for the drapes to hang and still clear the window. Sheers with drapes would look great. I'd look for a linen type drape that matches your wall color with white sheers.

Got it! Okay yes i love the plan! Let me look at some curtain options and see what you all think :)

I love something like this for curtains from PB - just have to find the right shade. I believe this room is BM Revere Pewter but have to double check.

Also thinking a dark rod - Dark ORB ?

I'd try the ivory or natural beige color for those drapes, but they look good. Get a rod with a flat end instead of the round finial though, so you can make the rod as long as possible.

Got it! So let me just make sure i’ve got this right before i start looking for the correct size rod...

My curtains drawing lol ....

Yes!

How does this rod look? With the flat finials like you mentioned - same one/ similar to the one we used in nursery and were very happy with. Would I want to do the .75" diameter or the 1.25" diamteter? And If I'm doing sheers inside I need to do a double rod again?

I don't see a photo, but as long as it has flat finials it should be fine. I would use the heavier rod, and a double rod if you want sheers.

oops -

so this is available on clearence but only in one size - 96"-120" . Our space in the entire alcove from one end of the wall to another is 105" - that means this should work fine?

https://www.potterybarn.com/products/pb-standard-metal-double-drape-rod-antique-bronze-holiday-20/?pkey=s~double%20rod~27

This is the exact one we used in nursery and where very happy with the quality, but I don't know if this is too long.

nevermind it looks like that one is completely unavailable now. I found this option -

https://www.potterybarn.com/products/pb-standard-metal-double-drape-rod-antique-bronze/?pkey=s~double%20rod~27

Checked some other websites and crate&barrel and CB2 only have matte black options, not sure where else I could check or will this one do?

That seems fine for the length, but I'm not sure if this will work. It doesn't appear that the bracket support sits far enough off the wall so you can clear your window moldings. You may need a design that has separate support brackets that come in different sizes, with a rod. Try Smith and Noble.

how about something like this ? Except it only comes in black...

https://www.cb2.com/cap-finial-double-rod-curtain-rod-set/f22136

I'm not seeing much on smith and nobel.

unless i do a custom order, but I really just wanted to be able to order something off line.

actually scratch that, i think this from ballard design will work?

https://www.ballarddesigns.com/double-rod-drapery-hardware-kit/428314?listIndex=6&uniqueId=428314

comes in the right shade as well, and seems to have a little bit more room from the wall.

Not the CB one based on reviews. The BD one looks good, but the bracket is only 6 3/4 from front to back, which I don't think gives you enough room for the second rod to clear the molding. How far out is your window molding from the wall? You may need a custom bracket/rod with a deeper bracket, or maybe you can find one that attaches to the side walls? I'd have a custom drapery person in your area come to look at the window and give you an estimate for the rod and also drapes. You might be surprised that it's not much more than ordering something online.

i just measured, the window molding (the white arched part) is only 1.5" off of the wall.

The photos make it look much thicker! If you call Ballard Designs they can tell you the dimensions between the back of the bracket and the back rod.

Rod ordered, it's not coming until April so have some time to work on curtains.

Should I be looking at pocket curtains or grommet curtains? Want to order a few swatches from PB. I am assuming 50"x96" for the curtains?

Imo grommet drapes are too casual for that room, and pocket drapes won't function well. I would look for drapes that can hang on rings from the rod. You'll have to measure to be sure the height works.

Hows this for a curtain? Or should it be a closer match?

can you take a pic further back and get the table and chandelier in pics of the two choices... I think I like the darker one to blend in to the wall, but would like to see more of the room. have you gotten any art yet for the room?

that is all one color "oatmeal" just in different lighting. I should have removed the white swatch. I tried to pick a color to blend with the wall, but it is not exact. Nope no art, that is definitely not my thing at all , so i don't even know where to begin looking. I'll attach another photo

Photo

I like it and think blending in is the way to go. it seems to have a nice texture.

as for art, i think it could go in a bunch of different directions. one idea I had uptrend was to do a bunch of black and white photos in the same frame and large white mats all the way around the room, kinda like this pic.
could be abstract art or black and white photography. it would bring in some modernness to the room. could start with one very large more colorful piece above the sideboard in subdued colors like art of a calm ocean or landscape. I always like landscapes. could go more traditional with a gallery wall of a mix of art, there is this etsy store below where you can do digital downloads of European countryside images in different sizes. idea below. could be very pretty with your new chandelier and table and sideboard... so, lots of options on direction.

Contemporary Dining Room · More Info