Software
Houzz Logo Print
chrissysped

installed pictures of cambria Colton?

6 years ago

I see this is one of their newer options. Looking for installed pictures. Is the rust mentioned orangey? Thanks for the pictures!!

Comments (208)

  • 4 years ago

    Hi sdd53,
    It is 2x6 and unfortunately I don’t know the name of the grout color. The tile was put in about 7 years ago but I would say it’s a light beige or ivory in color. The tile is ivory.

  • 4 years ago

    Thank you! its about the same size as the one I’m looking at so thats helpful. ive seen so many 3x12 tiles but i like the way yours looks!

  • 4 years ago

    @d_nugent I love the silver satin-i am deciding between that and pale oak. i have similar colored cabinets and love the way you tied in your colors with the artwork. i love the painting-who is the artist?

  • 4 years ago

    The silver satin is a lovely colour. I also used it in my bathroom. The light changes the colour, but it is always pretty. Thanks for asking about the picture. I bought it before the Colton instal. It looks like an original, but I picked it up in a lighting store and I think it is fabricated. I loved the colours. Funnily enough on the Colton website they recommended that orange colour to use as a highlight with Silver Satin. Sometimes things are just meant to be 😀

  • 4 years ago

    anybody use a black tile for B/S with the Colton?

    black tile

    thinking of this with greige cabs/ black hardware / cork medium colored oak floors.

    thoughts?

  • 4 years ago

    I am so happy I found this post! I will soon be part of the Colton family! The pictures that all of you have posted are beautiful! It confirmed my decision to choose Colton over Sutherland. Colton has a distinguished sophistication about it yet it has some drama. I didn’t want it being too subtle. To me it’s timeless. Thank you for sharing.

  • 4 years ago

    I had Colton installed in my kitchen about six months ago. I love everything about it. used it for the backsplash also.


  • 4 years ago




  • 4 years ago

    We also don‘t have any cutouts in the backsplash slab. All of the outlets are under the upper cabinets. It gives everything a clean look.

  • 4 years ago

    I only have access to a 12x10 porce of Colton. Do the brown streaks show up alot or are they mostly grey streaks? Our sink will be in island and I was hoping to install brown sink. would that work?

  • 4 years ago

    I would say there is an equal amount of brown and gray. I have natural cherry cabinets and it looks amazing. I chose the largest single bowl sink in stainless steel and I love it.

  • 4 years ago

    Thanks!

  • 4 years ago

    I installed a brown Blanco sink and love it!!! I am obsessed with my Colton countertop too!

  • 4 years ago

    Thanks! I think I’m def going with the brown sink!

  • 4 years ago
    last modified: 4 years ago

    @sdd53 did you ever use the wellfleer coconut? if so, what grout did you choose and do you have any pictures?

  • 4 years ago

    Yes I did and I love it!I used laticrete light pewter for the grout. I will try to get some better pictures up but hoping you can see the very subtle variations in the tile.

  • 4 years ago

    Here’s another view in daylight hope this helps! I’m very happy with it. The picture doesn’t do it justice -it actually matches the Colton perfectly because it’s not a true white. You can tell when you look at it compared to the outlet.

  • 4 years ago

    @sdd53 It looks great!! Thank you so much for posting these for me. Its been hard to find real photos of the wellfeet tile. Im still questioning grout choices, but this definitely helps!

  • 4 years ago

    Glad I could help! I was so happy to find this post when I was going through the process because it really does help to see pictures. I had picked the wellfleet originally, then second guessed everything only to go back to my original choice, which I’m so glad I did! Trust your instincts! Good luck!

  • 3 years ago

    This post is extremely helpful. We are going to use Colton and are looking for a backsplash. I've found Bedrosians Clara 2.75" X 11" Glossy Porcelain Tile in White and Ivory. Not sure which way to go. Ideas anyone?

  • 3 years ago

    Hard to tell from website, you really need to get a sample of each (preferably at least 4 tiles) and arrange them vertically on your wall next to the sample of Colton. You need to see it in your own lighting because it looks differently than it does in the tile store. Good luck!

  • 3 years ago

    So we chose Colton and the kitchen designer suggested that we use a matte finish for our backsplash. We went with a Dale-tile subway tile that is 4” by 12”. I’m sure of the color but I think there were only 2 to choose from. Probably a bit warn for it is not bright white. We use a light to mid tone groat. Very pleased.

  • 3 years ago

    Very nice!

  • 3 years ago

    Hello,

    we are looking to put the Colton countertop in our kitchen, but I am afraid that it will clash with our white farmhouse sink, The rest of the kitchen it a light grey and the island is a navy blue color and the hardware is black. Let me know anyones thoughts Thank you!!

    Sarah

  • 3 years ago

    It is definitely more of a warm white. Get a good size sample and put it next to your sink to try. The black hardware may be too harsh for it in my opinion, but it’ll probably look great against the navy island!

  • 3 years ago

    I’m not sure if lighting is great but you see here. We put in a Koehler white sink and I was concerned about that too. I actually really like them together but it is personal opinion.

  • 3 years ago

    I think it’s great with the white sink!

  • 3 years ago

    I am so glad I found this post. I am going to get Colton with a Blanco granite composite sink. I haven't decided what color yet. Thanks everyone!

  • 3 years ago

    You will love the Colton! I went with a brown Blanco sink

  • 3 years ago

    We decided on Colton and now I’m really double guessing our choice that it won’t contrast enough and might be too creamy. It looked pretty white at shop 😅Did anyone install it with warm grey cabinets?

  • 3 years ago

    Yes we did and we love it! I will try and find a picture. I had the same concerns and I’m so glad we went with it. We did matte finish.

  • 3 years ago

    Thank you, I’m having anxiety with this kitchen remodel and seems like vision is very different from reality 😄🤦🏻‍♀️

  • 3 years ago

    That will look beautiful together!!!

  • 3 years ago

    Absolutely! The Colton will look fantastic! It’s a warm white which goes with the tone of your cabinets.

  • 3 years ago

    Installed “Colton” some veins look almost blue

  • 3 years ago

    Beautiful!

  • 3 years ago


  • 3 years ago

    very nice!

  • 3 years ago

    Love it!

  • 3 years ago

    @lisab4831 can you post pictures of your countertop and sink? what backsplash did you go with?

  • 3 years ago

    @bisimon99 What color did you paint your walls and trim. I am going to have warm white cabinets with a Colton countertop.

  • 3 years ago

    hi my walls are sherwin williams worldly gray my trom is oak from when we built but I used alabaster white for my cabinets (SW)


    good luck

  • PRO
    2 years ago

    Has anyone used the matte finish for their Colton? I really prefer the look, but I would like some real-world feedback on the durability. Thanks!

  • 2 years ago

    If anyone know of Bobby Parrish aka FlavCity blogger on Instagram, his kitchen (island, counters and backsplash) was done using Cambria Colton ;)

  • 2 years ago
    last modified: 2 years ago

    I have dark cheery cabinets and a busy back splash. how will the cambria Colton Quartz look with these?


  • 2 years ago



  • 2 years ago

    Some similar colours in my black splash and I really like it!

  • 2 years ago

    Back splash

  • 2 years ago

    Thank you K like what you have too

  • 2 years ago

    That is supposed to say I like what you have.