Software
Houzz Logo Print
webuser_813078832

Yet another Vent-a-Hood/other hood insert question.

last year
last modified: last year

I've tried searching this to death, but most of the response I've found are older so looking to see some updated responses.


We have a 48" inch gas range and are looking at a hood insert, everything I read keeps coming back to a few common brands (but we're open to any recommendations):


Vent-a-Hood Magic Lung: https://ventahood.com/index.php/products/liner-inserts/li-wm?id=361&model=BH446PSLB


XO Appliance - no specific.

Best: https://www.pcrichard.com/best-46-cabinet-insert-range-hood-with-1200-cfm-internal-blower-stainless-steel/CP37I482SB.html


Or this best: https://www.abt.com/Best-CP5-Series-1500-CFM-48-Stainless-Steel-Built-In-Range-Hood-With-iQ12-Blower-System-CP57IQT482SB/p/76146.html


Faber - no specific


We're looking at the 900 - 1200cfm range for blowers and the location of our range is directly against the rear exterior wall, so it has a short direct duct run to the exterior and will be using a 10" or 12" duct.

What kept bringing me back to the VAH was the claims for low noise during operation since we're not able to go external or in the above rafters. Any recommendations or input is greatly appreciated.

Comments (4)