Insulation Basics: What to Know About Spray Foam
Learn what exactly spray foam is, the pros and cons of using it and why you shouldn’t mess around with installation
Mariana Pickering
June 10, 2014
Houzz Contributor; Owner/CEO of Emu Building Science; LEED AP BD+C. After spending many years as an architectural designer in the high-efficiency residential Italian market, I now run a company that specializes in advanced construction science and Passive House design. We are located in Denver, Colorado, and Northern Italy, and we work internationally with builders, designers, and manufacturers of high-performance projects and products.
Houzz Contributor; Owner/CEO of Emu Building Science; LEED AP BD+C. After spending... More
While we all wish there were a single answer for any given problem, oftentimes that’s just not the case. This is true for material options for home insulation. Despite what the market says is the most popular insulation material or method at any given moment, the truth is that each individual project has its own set of circumstances that call for a recommended set of options. And within those options, the specifications and installation can have a massive impact on the result.
It’s important to understand each material and how it works within your home’s construction and the environment in which you live. In this new series, we’ll take a look at various thermal insulation types and materials to help you figure out which is the best one for your project.
We’ll begin with spray polyurethane foam (SPF), which, at least in North America, is fast becoming one of the most popular options.
It’s important to understand each material and how it works within your home’s construction and the environment in which you live. In this new series, we’ll take a look at various thermal insulation types and materials to help you figure out which is the best one for your project.
We’ll begin with spray polyurethane foam (SPF), which, at least in North America, is fast becoming one of the most popular options.
What is SPF? Spray polyurethane foam is a heat-activated polymer that is just what it sounds like, a foam insulation that is sprayed into place. It is made by mixing two ingredients onsite using special equipment. The mixture is then sprayed through a heated hose onto the surface that needs to be insulated. As the chemical reaction between the two ingredients takes place and the substance heats up in the hose, the liquid turns foamy, expands and then eventually hardens in place.
Closed-cell and open-cell spray foam. These are the two kinds of spray-foam insulation. Open-cell SPF is the lighter, less dense option; it is the cheaper of the two but has less insulating power (or a lower R-value). Closed-cell SPF is denser and more expensive, can provide a bit more rigid support to certain structures and can act as a water vapor barrier, because it is less permeable.
Closed-cell and open-cell spray foam. These are the two kinds of spray-foam insulation. Open-cell SPF is the lighter, less dense option; it is the cheaper of the two but has less insulating power (or a lower R-value). Closed-cell SPF is denser and more expensive, can provide a bit more rigid support to certain structures and can act as a water vapor barrier, because it is less permeable.
Why is SPF so popular in the United States? Spray foam has the potential to tackle air leakages better than many other insulation options. Because it is sprayed into place, the foam can fill up cavities and block any small holes that could compromise your building envelope. It can be applied to vertical or horizontal surfaces to act not only as thermal insulation, but also as an air barrier. It’s synthetic and does not attract rodents or insects. When applied properly, spray foam can contribute to a successful energy-efficiency strategy.
As with many aspects of the building market, there are variations in what is considered common around the world. Here in Italy, for example, spray-foam insulation has not taken hold of the market as it has in the U.S., for a variety of reasons outside the scope of this ideabook. As a result, it is more difficult to find installers here, although there are versions of SPF available on the European market.
As with many aspects of the building market, there are variations in what is considered common around the world. Here in Italy, for example, spray-foam insulation has not taken hold of the market as it has in the U.S., for a variety of reasons outside the scope of this ideabook. As a result, it is more difficult to find installers here, although there are versions of SPF available on the European market.
Relative ease of installation. This makes it a popular choice for contractors (although see my notes on installation difficulties below). Plus, even though it can be expensive, its relatively high R-value per inch makes it a competitive option. It’s particularly interesting for renovation projects where traditional batt or board insulation may be difficult to insert. With spray foam (as with blown-in insulation), it’s possible to inject the insulation into a wall cavity, for example, or apply it to a sloped surface.
Challenges of installation. As with many building technology solutions, the increasing popularity of a product or method means an increase in misuse and misunderstandings. Unfortunately, nowadays it is quite common to find examples of spray-foam insulation that have been specified or installed incorrectly.
The most common problems with spray-foam applications are:
The most common problems with spray-foam applications are:
- The chemicals were not mixed correctly, and the foam starts to pull away from the neighboring surface
- The chemicals were not mixed correctly, causing lingering odors and health problems for the occupants
- The installers rush through the installation, leaving gaps and holes that reduce the efficiency of the product
- A sufficient thickness either was not specified or was not executed as specified during installation
- The local climate was not taken into consideration, and the temperatures or humidity levels were outside of the manufacturer’s specifications
- In cold climates a vapor barrier was not installed over the spray foam, sometimes causing roof rot
Be aware of greenwash! Closed-cell spray foam in particular, which uses HFCs with high carbon dioxide content, has a very negative impact on global warming. Some manufacturers are claiming that their spray foam is ecologically friendly because it is based on soy or castor. Don’t be fooled by this marketing gimmick. The percentage of soy legally required for them to be able to make this claim is very low. SPF is still very much a fossil-fuel-based material (as are many other insulation options).
Consider your climate. There are too many climate-specific considerations for insulation to include in this ideabook. With SPF, for example, a vapor retarder layer over drywall may be required when using open-cell spray foam (seen here) in cold climates.
Potential health risks. Some people have reported health reactions to the lingering odor than can occur with certain mixes of chemicals, and the Environmental Protection Agency has issued information to make consumers aware of potential health risks, particularly during installation. There is still very little known about the off-gassing potential of this relatively new product, but a standard has been developed to start monitoring it.
It is absolutely essential that anyone working on the construction or renovation of a home using SPF follow the recommended health guidelines. Please don’t think that you can install this in your shorts and T-shirt on the weekend. Consult a professional or do your research.
It is absolutely essential that anyone working on the construction or renovation of a home using SPF follow the recommended health guidelines. Please don’t think that you can install this in your shorts and T-shirt on the weekend. Consult a professional or do your research.
The good news. Learning the pitfalls is just part of being more aware about the consequences of a certain decision. Each and every insulation material has advantages and disadvantages. SPF is a viable solution for certain homes and can offer substantial energy savings if installed correctly. You just need to be aware that, relative to other materials, the installation can be easier to execute but also easier to rush through. Knowing what questions to ask your installer can go a long way toward obtaining optimal results.
Tips for working with an installer:
Your turn: Do you have SPF in your home? What kind of energy savings have you seen? Please be sure to indicate your geographic region when sharing info in the Comments.
More Insulation Basics: Heat, R-Value and the Building Envelope
Tips for working with an installer:
- Hire someone reputable with verified recommendations.
- Make sure the work is monitored by someone other than the installer.
- Do a quality control check before issuing final payment.
Your turn: Do you have SPF in your home? What kind of energy savings have you seen? Please be sure to indicate your geographic region when sharing info in the Comments.
More Insulation Basics: Heat, R-Value and the Building Envelope
KA Builders is a dedicated and innovative remodeling company based in the heart of your city. With our years of... Read More
Related Products
Related Stories
Events
5 Trends in New Engineered Countertops and Surfaces for 2024
See the latest styles and features for quartz, porcelain and sintered stone showcased at the recent KBIS 2024 trade show
Full Story
Events
5 Trends to Watch From London’s 2024 Surface Design Show
Find out about new surface materials and products displayed at the annual trade event
Full Story
Events
5 New Trends in Flooring for 2024
By Julie Sheer
See the latest looks in luxury vinyl, engineered wood, porcelain, laminate and other products debuting this year
Full Story
Events
What’s New in Tile for 2024
By Julie Sheer
See 5 trends in new tile collections that debuted at The International Surface Event trade show in Las Vegas
Full Story
Kitchen Countertops
What Kitchen Countertop Colors Should You Choose?
By tidgboutique
Consider these popular colors and styles to get the look you want — no matter what material you use
Full Story
Events
7 Trends for Countertops and Other Surfaces in 2023
See the latest looks for engineered quartz, natural stone and other materials showcased at the KBIS 2023 trade show
Full Story
Floors
What’s New in Flooring for 2023
By Julie Sheer
See the trends in luxury vinyl, hardwood, and faux wood and stone flooring products debuting this year
Full Story
Events
What’s New in Tile for 2023
By Julie Sheer
Five trends in new tile collections were spotted at the recent International Surface Event 2023 trade show in Las Vegas
Full Story
Events
The Changing Face of Tile at Italy’s Cersaie 2022 Trade Fair
We saw muted tones, tactile surfaces, smaller formats and innovation at the international ceramics and bathroom show
Full Story
Kitchen Design
The Best Low-Maintenance Kitchen Finishes
By Sam Ferris
Cut down on cleaning time and repair costs by choosing these finishes for flooring, cabinets, countertops and more
Full Story
You could just put fiberglass around the fixture and on top of wiring (make sure there are no more than three together I think is current code - check) and spray over that. To my mind they do not use enough spray foam - for an attic I would do at least two, even, three inch passes. Make sure they spray the tops and sides of the joists to stop thermal bridging/transfer. It really shouldn't be a problem but better safe than sorry - you don't know for sure and you don't know what people will do with that fixture in the future. Spray foam is more likely to off gas at higher temps. I would talk to the light manufacturer, spray foam folks and inspector/official. The thought of a house fire for the sake of a detail is horrific.
I like these thoughts as you never know when a fixture may fail and replacing the socket is not doable. I also thie your comment about the wire, I never thought about it but the conductors are always rated in free air, in conduit or direct buried. I do not think there is anything in the US electrical code about wires covered in a thermal resistant insulation, I think this would derate them a lot! As for your comment about LED lights, If the light socket is a standard medium base then you must consider that any type of bulb could be used as a replacement and incandescent should be considered or the worst case heat generating lamp for that socket style and size. great comments.
Thank you Nathan.
"If you did spray around the light fitting and wanted to replace the light fitting or it broke cutting it out of the foam would be fiddly and messy and wiring it up when all wires lost in the foam would be tricky.
Don't recommend that electric cables are lost in any insulation build up either for similar fire risk issues."
For better or worse wiring is routinely spray foamed in place - I would be concerned about how many are in one place similar to how many go through a single hole or are stapled together in one place.