• Number of Pieces Included: 1
• Sq. ft. in 1 Quantity: 1
• Mesh Backing

• Cypress Mural Collection is ideal for creating a traditional look with a modern twist. This masterpiece provides you to create timeless decoration in your home. Cypress Hand Made Mural masterpiece provides you to create timeless decoration in your home. Welcome to a world of finesse and of elegance. Oil Rubbed Bronze isn't Bronze at all, it is Copper with a Black Patina Finish. Since there is no true definition, most agree in tile Industry broad terms that Oil Rubbed Bronze should have darker copper metal tones with a bit of the metal base material showing through. Oil rubbed bronze is also known as a "living finish". A living finish will wear over time and the darker matte surface will begin to reveal lighter, coppery highlights. This premium real metal mural provides style, elegance and uniqueness like never seen before. With Cypress Mural Collection, your room will be the eye-catching space that you will admire.
• 16 in. width x 24 in. length and 15.2mm thickness; 1 single backsplash tile covers 2.66 sq. ft.
• Produced by grade 1, first quality premium real metal and composite poly resin backsplash tile for commercial or residential indoor use
• Oil rubbed bronze isn't bronze at all, it is copper with a black patina finish; since there is no true definition, most agree in tile industry broad terms that oil rubbed bronze should have darker copper metal tones with a bit of the metal base material showing through
• V3 - moderate handmade textured, antique, and tumbled look, unglazed smooth patterned finish and moderate shade/tone variation because of handmade manufactured mural or plaque
• Oil rubbed bronze is also known as a "living finish"; a living finish will wear over time and the darker matte surface will begin to reveal lighter, coppery highlights
• 1-piece per case, pack weight equals 14 lb.
• Slight variation (spontaneous shade variation) from mural to mural and within each mural; every piece of hand made mural is created to be unique and all pieces are different look
• Produced by first quality premium real metal, natural stone particulars and premium poly resin; unglazed matte smooth finish with a uniform appearance in tone variation
• Sealing not required, permanently protected by special UV curing protective layer factory implemented
• Please use only natural cleaning materials like soft soap; acidic, chemical, or multipurpose cleaners not recommended and can give damage on protective layer
• Can be installed fire place and behind the Owen/place over stovetop of as backsplash tile; please read user manual before installation
• Not frost resistant; P.E.I. Rating 0 is suitable only for wall tile commercial or residential indoor use
• Please do not forget your coordinating trim pieces, grout, thin set and installation tools

• 9.9 square feet, 22 pieces per case. Case weight is 23.1 lbs.
• Grade 1, first-quality ceramic tile for wall use
• 8 in. width x 8 in. length x 0.27 in. thick
• Unglazed, medium textured finish with a mixed finish and moderate variation in tone
• PEI Rating 0 is suitable for wall use only
• Non-Vitreous tiles have water absorption of more than 7% for indoor use
• DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
• Not frost resistant
• WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
• Country of Origin: Spain

• COPPER ANTIQUE METAL TILE 1 X 1
• Murray River Metal Series

• Material: Metal
• Sheet Size: 11 1/4" x 11 1/4"
• Piece Size: 1" x 1"
• Thickness: 3/8"
• Color: Antique Copper
• Finish: Antique
• Backing: Mesh

Installation Tips:

Features:

• Color: Antique Copper
• 121 individual tiles per sheet
• Individual tile dimension: 25cm x 25cm (approx. 1” x 1”), 8mm thick (3/8”)
• 12" x 12" per sheet

• Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
• The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
• Maintenance

• MURAL TITLE: Beach Ceramic Tile Wall Mural Kitchen Backsplash Bathroom Shower HZ500060-55S
• MURAL SIZE: 21.25"W x 21.25"H using (25) 4.25" x 4.25" Ceramic Tiles-Satin Finish
• COMMON USES: Kitchen Back Splash Tile | Bathroom Shower Tile | Accent/Decor | Any Indoor Wall
• TILE PRICING: 4.25x4.25=$10 each, 6x6=$20 each, 8x8=$30 each, 12x12=$60 each
• YOUR Mural Can Be Designed To Any Size | Using Your Photos Or Ours | Contact Us For A Quote
• FREE SHIPPING to US addresses. Discounted shipping worldwide.
• We custom make every ceramic tile mural one piece at a time. Our staff pay great attention to detail & will work with you in designing your perfect ceramic tile mural. Our mural tiles are used in kitchen backsplashes, bathroom showers, ANY indoor wall or outdoor shaded area (no direct sun but all weather stable). Contact us with any questions or to request a quote.

Features:

• Carrara White Marble 2"x4" brick pieces mounted on 12"x12" sturdy mesh tile sheet
• 3 rows and 6 columns with 18 stones on each sheet; 5/16" thickness; Polished finish
• Carefully Selected; Consistent in size and finish
• Factory Direct
• Price per sheet (1 sq.ft.)

• Number of Pieces Included: 1
• Sq. ft. in 1 Quantity: 1
• Mesh Backing

• Design: Hammered Copper
• Outer Dimensions: 1" x 8"
• Quantity of 8
• Finish: Oil Rubbed Bronze (Dark Brown)
• 100% Recyclable
• Composition: 99.7% Pure Recycled Copper
• Lead Free (less than .01%)
• Patina: Fired
• Warranty: Limited Lifetime
• BRAND: Premier Copper Products

Important Note:

Tile Packages Suggested Accessories:

• Hammered Copper 8-in Round Cylinder Pendant Light (L900DB)
• Small Hammered Copper Tissue Box Cover (TBCSDB)
• Copper Switchplate Single Duplex, 2 Hole Outlet Cover - Quantity 4 (SO2_PKG4)
• Copper Sink Wax Protectant (W900-WAX)

• Price per Sheet
• Sheet : 11 1/4" x 11 1/2" - Size 3/4" in x 3/4" diameter
• 16 rows - 0.9 sq ft per sheet
• Penny Rounds are made of a metal cappin glued onto a porcelain tile body.

• Mosaics Metal Tile Penny Round Specifications and Care:
• Penny Rounds are made of a metal capping glued onto a porcelain tile body.
• The copper capping is made from solid copper. All other capping are made from grade 304 stainless steel. The different colors of stainless are produced by an anodizing process. Colors are V1 in shading. Brushed and stippled metal will be installed randomly on the sheet from the factory, in reference to the direction of the texture. This will give the appearance of different shades, and adds to the character of the product.
• The glue used to bond the metal to the porcelain base is German “Henkel” contact adhesive. It is temperature resistant to 158 degrees Fahrenheit, water resistant, and resistant to diluted acids and alkaline.
• Penny Round copper may be installed on interior wall areas, in wet or dry locations (such as a shower wall or kitchen backsplash). It may not be installed on floors. Through oxidization, all copper will patina (darken or turn dark green).
• Copper should not be used in steam showers, submerged areas, or exterior applications.
• Stainless steel should not be used in steam showers or submerged areas, but can be used in frost-free exterior applications. Both stainless and copper can scratch and dent.
• Make sure all product is inspected by the end user before installing to avoid any issues. No refunds or adjustments of any kind will be made by Flooringsupplyshop . com / International Flooring Center, Inc. after the product is installed. The installer is responsible for installing the correct material. Use constitutes acceptance.
• To cut, use a tile wet saw with a diamond blade designed for cutting porcelain. Target, Pearl, MK, and many other blade manufacturers make blades for porcelain. Always cut with the metal side up. It may be necessary to debur the edge of the metal with a rub stone or fine file. Always wear eye protection.
• Suggested Installation Method
• Always use a licensed contractor.
• Always confirm in person with the end user / specifier that the product being installed is the correct product before installing it, and is suitable for the project.
• Always inspect the product for unintended flaws that are not part of the fashion or style of the product. Do not install defective or damaged product. If there is a question about the quality of the product, contact your supplier before proceeding.
• Make sure the substrate is suitable for metal. Choose and follow the best technique for your project. See TCNA handbook, page 10 and all pages pertaining to substrate preparation.
• TCNA handbook, page 10. And all pages pertaining to substrate preparation. ANSI A108.1B, A108A2.1.8, C1396, C1396M-04 Make sure crack isolation membranes and water proofing membranes are considered for your type of installation where necessary.
• TCNA handbook, page 9, 10, ANSI a118.10, A108.12
• The metal may expand and contract differently than adjacent tile. Make sure expansion joints and movement joints are considered and used when necessary. Keep this product over six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and backsplashes behind cook tops. Extra soft joints may be required in these high heat areas. Use a soft (caulking) joint between the metal and any other material in a continuous installation. Use a soft joint where two different planes come together. Use a soft joint every six feet in a continuous run, or according to the TCNA handbook. Use a soft joint where the metal abuts to plumbing fixtures, cabinets, counter tops, window or door moldings, and bath tubs in accordance with the TCNA handbook. TCNA handbook, page 8, 9, 68, 69, and EJ171-05.
• Use a flexible modified white thin-set mortar that meets or exceeds ANSI 118.4 (a flexible acrylic mortar system such as those from Mapei, Laticrete, TEC, Customs, C-Cure, Siena, or equivalent). Follow the manufacturer’s instructions. Organic Mastic and Epoxy are not recommended for Penny Rounds.
• Use the correct size notch trowel depending on the size of the product and your desired results. In most cases a 5/32 x 5/32 v-notch trowel will be used. Do not allow the white thin-set to rise up in the joints. Make sure you achieve full contact between the back of the tile and thin-set; you may use a clean grout float to embed the metal.
• Allow the thin-set to cure according to the manufacturer’s instructions.
• 10. Use a modified grout. Grout with flexing capabilities or a flexible additive is preferred.

• 13. Read and follow all manufacturers instructions on the grout.

• Care and Maintenance

• Care and Maintenance for Borders

• Copper

• Although very tough, all metals can scratch or dent, use common sense when choosing the installed location.

• 12 in. width x 18 in. length and 1.2 cm thickness. 1 single backsplash tile covers 1.5 square feet.
• 1 piece per pack, piece weight equals 7 lb.
• Sealing not required, permanently protected by special UV curing protective layer factory implemented
• Slight variation (spontaneous shade variation) from mural to mural and within each mural; every piece of hand made mural is created to be unique and all pieces are different look
• Produced by first quality premium real metal, natural stone particulars and premium poly resin; unglazed matte smooth finish with a uniform appearance in tone variation
• Can be installed fire place and behind the Owen/place over stovetop of as backsplash tile; please read user manual before installation. Please use only natural cleaning materials like soft soap; acidic, chemical, or multipurpose cleaners not recommended and can give damage on protective layer
• Not Frost Resistant. P.E.I. rating 0 is suitable only for wall tile trim commercial or residential indoor use
• Oil rubbed bronze isn't bronze at all, it is copper with a black patina finish; since there is no true definition, most agree in tile industry broad terms that oil rubbed bronze should have darker copper metal tones with a bit of the metal base material showing through
• V3 - moderate handmade textured, antique, and tumbled look, unglazed smooth patterned finish and moderate shade/tone variation because of handmade manufactured mural or plaque
• Slight variation (spontaneous shade variation) from mural to mural and within each mural; every piece of hand made mural is created to be unique and all pieces are different look
• Please use only natural cleaning materials like soft soap; acidic, chemical, or multipurpose cleaners not recommended and can give damage on protective layer

• 2 in. width x 2 in. length and 8 mm thickness; each single insert tile coverage area 0.028 square foot; piece weight equals 0.110 lbs.
• 8-piece/case; 1 case tile covers 0.23 square foot; total case weight 0.900 lbs.
• Slight variation (spontaneous shade variation) from tile to tile and within each tile
• Produced by first quality premium real metal and poly resin insert wall accent tile for commercial or residential indoor use

• Nature of handcrafted (handmade) tile on this product small variances on size, dimension, color, texture may occur

• Sealing not required, permanently protected by special UV curing protective layer factory implemented

• Not frost resistant; P.E.I. Rating 0 is suitable only for wall accent tile commercial or residential indoor use
• Water absorption 0.5% - 3% for metal insert
• Please do not forget your coordinating trim pieces, grout, thinnest and installation tools
• Use a non-sanded grout for the trims, insert and murals
• Not frost resistant, indoor and wall use only
• Limited warranty only applies to Niche Tiles that are handled and installed in the manner specified in
• The relevant Niche Tiles Installation, Use and Care Instructions. Niche Tiles cannot accept responsibility for
• Performance of the products from and after the time that they are installed.

• Mural Title: Cottage Garden With Sunflowers
• Mural Size: 30" x 30" using (25) 6" x 6" ceramic tiles-satin finish
• Common Uses: Kitchen Backsplash Tile | Bathroom Shower Tile | Tub Surround Spa Tile | Framed Art Tile | Accent Decor Tile | Any Indoor Wall

• Color: Copper
• Number of Pieces Included: 1
• Sq. ft. per 1 Quantity: 0.9
• Individual Tile

• 2 in. width x 2 in. length and 8 mm thickness; each single insert tile coverage area 0.028 square foot; piece weight equals 0.110 lbs.
• 8-piece/case; 1 case tile covers 0.23 square foot; total case weight 0.900 lbs.
• Slight variation (spontaneous shade variation) from tile to tile and within each tile
• Produced by first quality premium real metal and poly resin insert wall accent tile for commercial or residential indoor use

• Nature of handcrafted (handmade) tile on this product small variances on size, dimension, color, texture may occur

• Sealing not required, permanently protected by special UV curing protective layer factory implemented

• Not frost resistant; P.E.I. Rating 0 is suitable only for wall accent tile commercial or residential indoor use
• Water absorption 0.5% - 3% for metal insert
• Please do not forget your coordinating trim pieces, grout, thinnest and installation tools
• Use a non-sanded grout for the trims, insert and murals
• Not frost resistant, indoor and wall use only
• Limited warranty only applies to Niche Tiles that are handled and installed in the manner specified in
• The relevant Niche Tiles Installation, Use and Care Instructions. Niche Tiles cannot accept responsibility for
• Performance of the products from and after the time that they are installed.

• A box come with 1 0 sheets , can cover about 8.4 sq ft
• Number of Pieces Per 1 Quantity: 10
• Square Feet Per 1 Quantity: 10
• Individual Tile

Product Description

• Title: Quail and Pots by Susan Libby
• Suitable for a Kitchen Backsplash, Behind a Stove, in a Bathroom or Shower, or Interior Walls
• # of Pieces Qty 1: 6
• Sold By: complete mural
• Ships As: individual tiles
• Sq. Ft. per Qty 1: 1.5

2" x 2" Hammered Copper Tile Features:

• Design: Hammered Copper
• Outer Dimensions: 2" x 2"
• Quantity of 1
• Finish: Oil Rubbed Bronze (Dark Brown)
• 100% Recyclable
• Composition: 99.7% Pure Recycled Copper
• Lead Free (less than .01%)
• Patina: Fired
• Warranty: Limited Lifetime
• BRAND: Premier Copper Products

Important Note:

Suggested Tile Accessories:

• 4" x 4" Hammered Copper Tile (T4DBH)
• 6" x 6" Hammered Copper Tile (T6DBH)
• 4" x 8" Hammered Copper Tile (T48DBH)

• Try it before you buy by ordering a sample!
• Metal and glass mix unique kitchen backsplash tile. Comes with metal insert gray and copper colors, with gray metallic glass inserts.
• Made in Spain

• Number of Pieces Included: 1
• Sq. ft. in 1 Quantity: 1
• Mesh Backing

Features:

• Carrara White Marble 3" (from point to point) hexagon pieces mounted on a sturdy mesh tile sheet
• 5 rows and 4 columns with 20 stones on each sheet; 5/16" thickness; Honed finish
• Carefully Selected
• Consistent in size and finish
• Factory Direct
• Price per sheet (0.92 sq.ft.)

• Number of Pieces Included: 1
• Sq. ft. in 1 Quantity: 1
• Mesh Backing

• COPPER ANTIQUE METAL TILE 1 1/4 X 4
• Murray River Metal Series

• Material: Metal
• Sheet Size: 11 1/4" x 11 1/4"
• Piece Size: 1 1/4" x 4"
• Thickness: 3/8"
• Color: Antique Copper
• Finish: Antique
• Backing: Mesh

Installation Tips:

Features:

• Color: Antique Copper
• 12" x 12" per sheet

• Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
• The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
• Maintenance

• 10.88 square feet, 16 pieces per case. Case weight is 43.68 lbs.
• Grade 1, first-quality porcelain tile for floor and wall use
• 9.75 in. width x 9.75 in. length x 0.4 in. thick
• Glazed, slightly textured finish with a low sheen and uniform appearance in tone
• PEI Rating III is suitable for medium-duty residential floors including kitchens, halls, corridors, balconies, terraces and areas used more often with normal footwear and small amounts of dirt
• Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
• This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
• Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
• WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
• Country of Origin: Spain

• 12 Tile Mural on 4 1/4" ceramic satin finish tiles. AMERICAN MADE !!
• Overall dimensions are approximately 17" wide x 12.75" tall
• This tile mural ships within 2 BUSINESS DAYS from receipt of order. Carefully wrapped and fully insured.
• Perfectly suitable for any indoor wall application (wet or dry) or outdoors in shaded areas (no direct sunlight)

• Price per Sheet
• Sheet : 11 1/4" x 11 1/2" - Size 3/4" in x 3/4" diameter
• 16 rows - 0.9 sq ft per sheet
• Penny Rounds are made of a metal cappin glued onto a porcelain tile body.

• Mosaics Metal Tile Penny Round Specifications and Care:
• Penny Rounds are made of a metal capping glued onto a porcelain tile body.
• The copper capping is made from solid copper. All other capping are made from grade 304 stainless steel. The different colors of stainless are produced by an anodizing process. Colors are V1 in shading. Brushed and stippled metal will be installed randomly on the sheet from the factory, in reference to the direction of the texture. This will give the appearance of different shades, and adds to the character of the product.
• The glue used to bond the metal to the porcelain base is German “Henkel” contact adhesive. It is temperature resistant to 158 degrees Fahrenheit, water resistant, and resistant to diluted acids and alkaline.
• Penny Round copper may be installed on interior wall areas, in wet or dry locations (such as a shower wall or kitchen backsplash). It may not be installed on floors. Through oxidization, all copper will patina (darken or turn dark green).
• Copper should not be used in steam showers, submerged areas, or exterior applications.
• Stainless steel should not be used in steam showers or submerged areas, but can be used in frost-free exterior applications. Both stainless and copper can scratch and dent.
• Make sure all product is inspected by the end user before installing to avoid any issues. No refunds or adjustments of any kind will be made by Flooringsupplyshop . com / International Flooring Center, Inc. after the product is installed. The installer is responsible for installing the correct material. Use constitutes acceptance.
• To cut, use a tile wet saw with a diamond blade designed for cutting porcelain. Target, Pearl, MK, and many other blade manufacturers make blades for porcelain. Always cut with the metal side up. It may be necessary to debur the edge of the metal with a rub stone or fine file. Always wear eye protection.
• Suggested Installation Method
• Always use a licensed contractor.
• Always confirm in person with the end user / specifier that the product being installed is the correct product before installing it, and is suitable for the project.
• Always inspect the product for unintended flaws that are not part of the fashion or style of the product. Do not install defective or damaged product. If there is a question about the quality of the product, contact your supplier before proceeding.
• Make sure the substrate is suitable for metal. Choose and follow the best technique for your project. See TCNA handbook, page 10 and all pages pertaining to substrate preparation.
• TCNA handbook, page 10. And all pages pertaining to substrate preparation. ANSI A108.1B, A108A2.1.8, C1396, C1396M-04 Make sure crack isolation membranes and water proofing membranes are considered for your type of installation where necessary.
• TCNA handbook, page 9, 10, ANSI a118.10, A108.12
• The metal may expand and contract differently than adjacent tile. Make sure expansion joints and movement joints are considered and used when necessary. Keep this product over six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and backsplashes behind cook tops. Extra soft joints may be required in these high heat areas. Use a soft (caulking) joint between the metal and any other material in a continuous installation. Use a soft joint where two different planes come together. Use a soft joint every six feet in a continuous run, or according to the TCNA handbook. Use a soft joint where the metal abuts to plumbing fixtures, cabinets, counter tops, window or door moldings, and bath tubs in accordance with the TCNA handbook. TCNA handbook, page 8, 9, 68, 69, and EJ171-05.
• Use a flexible modified white thin-set mortar that meets or exceeds ANSI 118.4 (a flexible acrylic mortar system such as those from Mapei, Laticrete, TEC, Customs, C-Cure, Siena, or equivalent). Follow the manufacturer’s instructions. Organic Mastic and Epoxy are not recommended for Penny Rounds.
• Use the correct size notch trowel depending on the size of the product and your desired results. In most cases a 5/32 x 5/32 v-notch trowel will be used. Do not allow the white thin-set to rise up in the joints. Make sure you achieve full contact between the back of the tile and thin-set; you may use a clean grout float to embed the metal.
• Allow the thin-set to cure according to the manufacturer’s instructions.
• 10. Use a modified grout. Grout with flexing capabilities or a flexible additive is preferred.

• 13. Read and follow all manufacturers instructions on the grout.

• Care and Maintenance

• Care and Maintenance for Borders

• Copper

• Although very tough, all metals can scratch or dent, use common sense when choosing the installed location.

• Design: Hammered Copper
• Outer Dimensions: 4" x 8"
• Quantity of 8
• Finish: Oil Rubbed Bronze (Dark Brown)
• 100% Recyclable
• Composition: 99.7% Pure Recycled Copper
• Lead Free (less than .01%)
• Patina: Fired
• Warranty: Limited Lifetime
• BRAND: Premier Copper Products

Important Note:

Tile Packages Suggested Accessories:

• Hammered Copper 8-in Round Cylinder Pendant Light (L900DB)
• Small Hammered Copper Tissue Box Cover (TBCSDB)
• Copper Switchplate Single Duplex, 2 Hole Outlet Cover - Quantity 4 (SO2_PKG4)
• Copper Sink Wax Protectant (W900-WAX)

• 9 Tile Mural on 4 1/4" ceramic satin finish tiles. AMERICAN MADE !!
• Overall dimensions are approximately 12.75" wide x 12.75" tall
• This tile mural ships within 2 BUSINESS DAYS from receipt of order. Carefully wrapped and fully insured.
• Perfectly suitable for any indoor wall application (wet or dry) or outdoors in shaded areas (no direct sunlight)

• Blanded with colors: Brushed Copper, Stainless Steel and Black
• Price per Sheet
• Sheet : 11 1/4" x 11 1/2" - Size 3/4" in x 3/4" diameter
• 16 rows - 0.9 sq ft per sheet
• Penny Rounds are made of a metal cappin glued onto a porcelain tile body.

• Mosaics Metal Tile Penny Round Specifications and Care:
• Penny Rounds are made of a metal capping glued onto a porcelain tile body.
• The copper capping is made from solid copper. All other capping are made from grade 304 stainless steel. The different colors of stainless are produced by an anodizing process. Colors are V1 in shading. Brushed and stippled metal will be installed randomly on the sheet from the factory, in reference to the direction of the texture. This will give the appearance of different shades, and adds to the character of the product.
• The glue used to bond the metal to the porcelain base is German “Henkel” contact adhesive. It is temperature resistant to 158 degrees Fahrenheit, water resistant, and resistant to diluted acids and alkaline.
• Penny Round copper may be installed on interior wall areas, in wet or dry locations (such as a shower wall or kitchen backsplash). It may not be installed on floors. Through oxidization, all copper will patina (darken or turn dark green).
• Copper should not be used in steam showers, submerged areas, or exterior applications.
• Stainless steel should not be used in steam showers or submerged areas, but can be used in frost-free exterior applications. Both stainless and copper can scratch and dent.
• Make sure all product is inspected by the end user before installing to avoid any issues. No refunds or adjustments of any kind will be made by Flooringsupplyshop . com / International Flooring Center, Inc. after the product is installed. The installer is responsible for installing the correct material. Use constitutes acceptance.
• To cut, use a tile wet saw with a diamond blade designed for cutting porcelain. Target, Pearl, MK, and many other blade manufacturers make blades for porcelain. Always cut with the metal side up. It may be necessary to debur the edge of the metal with a rub stone or fine file. Always wear eye protection.
• Suggested Installation Method
• Always use a licensed contractor.
• Always confirm in person with the end user / specifier that the product being installed is the correct product before installing it, and is suitable for the project.
• Always inspect the product for unintended flaws that are not part of the fashion or style of the product. Do not install defective or damaged product. If there is a question about the quality of the product, contact your supplier before proceeding.
• Make sure the substrate is suitable for metal. Choose and follow the best technique for your project. See TCNA handbook, page 10 and all pages pertaining to substrate preparation.
• TCNA handbook, page 10. And all pages pertaining to substrate preparation. ANSI A108.1B, A108A2.1.8, C1396, C1396M-04 Make sure crack isolation membranes and water proofing membranes are considered for your type of installation where necessary.
• TCNA handbook, page 9, 10, ANSI a118.10, A108.12
• The metal may expand and contract differently than adjacent tile. Make sure expansion joints and movement joints are considered and used when necessary. Keep this product over six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and backsplashes behind cook tops. Extra soft joints may be required in these high heat areas. Use a soft (caulking) joint between the metal and any other material in a continuous installation. Use a soft joint where two different planes come together. Use a soft joint every six feet in a continuous run, or according to the TCNA handbook. Use a soft joint where the metal abuts to plumbing fixtures, cabinets, counter tops, window or door moldings, and bath tubs in accordance with the TCNA handbook. TCNA handbook, page 8, 9, 68, 69, and EJ171-05.
• Use a flexible modified white thin-set mortar that meets or exceeds ANSI 118.4 (a flexible acrylic mortar system such as those from Mapei, Laticrete, TEC, Customs, C-Cure, Siena, or equivalent). Follow the manufacturer’s instructions. Organic Mastic and Epoxy are not recommended for Penny Rounds.
• Use the correct size notch trowel depending on the size of the product and your desired results. In most cases a 5/32 x 5/32 v-notch trowel will be used. Do not allow the white thin-set to rise up in the joints. Make sure you achieve full contact between the back of the tile and thin-set; you may use a clean grout float to embed the metal.
• Allow the thin-set to cure according to the manufacturer’s instructions.
• 10. Use a modified grout. Grout with flexing capabilities or a flexible additive is preferred.

• 13. Read and follow all manufacturers instructions on the grout.

• Care and Maintenance

• Care and Maintenance for Borders

• Copper

• Although very tough, all metals can scratch or dent, use common sense when choosing the installed location.

• Price per Sheet
• Sheet : 11 1/4" x 11 1/2" - Size 3/4" in x 3/4" diameter
• 16 rows - 0.9 sq ft per sheet
• Penny Rounds are made of a metal cappin glued onto a porcelain tile body.

• Mosaics Metal Tile Penny Round Specifications and Care:
• Penny Rounds are made of a metal capping glued onto a porcelain tile body.
• The copper capping is made from solid copper. All other capping are made from grade 304 stainless steel. The different colors of stainless are produced by an anodizing process. Colors are V1 in shading. Brushed and stippled metal will be installed randomly on the sheet from the factory, in reference to the direction of the texture. This will give the appearance of different shades, and adds to the character of the product.
• The glue used to bond the metal to the porcelain base is German “Henkel” contact adhesive. It is temperature resistant to 158 degrees Fahrenheit, water resistant, and resistant to diluted acids and alkaline.
• Penny Round copper may be installed on interior wall areas, in wet or dry locations (such as a shower wall or kitchen backsplash). It may not be installed on floors. Through oxidization, all copper will patina (darken or turn dark green).
• Copper should not be used in steam showers, submerged areas, or exterior applications.
• Stainless steel should not be used in steam showers or submerged areas, but can be used in frost-free exterior applications. Both stainless and copper can scratch and dent.
• Make sure all product is inspected by the end user before installing to avoid any issues. No refunds or adjustments of any kind will be made by Flooringsupplyshop . com / International Flooring Center, Inc. after the product is installed. The installer is responsible for installing the correct material. Use constitutes acceptance.
• To cut, use a tile wet saw with a diamond blade designed for cutting porcelain. Target, Pearl, MK, and many other blade manufacturers make blades for porcelain. Always cut with the metal side up. It may be necessary to debur the edge of the metal with a rub stone or fine file. Always wear eye protection.
• Suggested Installation Method
• Always use a licensed contractor.
• Always confirm in person with the end user / specifier that the product being installed is the correct product before installing it, and is suitable for the project.
• Always inspect the product for unintended flaws that are not part of the fashion or style of the product. Do not install defective or damaged product. If there is a question about the quality of the product, contact your supplier before proceeding.
• Make sure the substrate is suitable for metal. Choose and follow the best technique for your project. See TCNA handbook, page 10 and all pages pertaining to substrate preparation.
• TCNA handbook, page 10. And all pages pertaining to substrate preparation. ANSI A108.1B, A108A2.1.8, C1396, C1396M-04 Make sure crack isolation membranes and water proofing membranes are considered for your type of installation where necessary.
• TCNA handbook, page 9, 10, ANSI a118.10, A108.12
• The metal may expand and contract differently than adjacent tile. Make sure expansion joints and movement joints are considered and used when necessary. Keep this product over six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and backsplashes behind cook tops. Extra soft joints may be required in these high heat areas. Use a soft (caulking) joint between the metal and any other material in a continuous installation. Use a soft joint where two different planes come together. Use a soft joint every six feet in a continuous run, or according to the TCNA handbook. Use a soft joint where the metal abuts to plumbing fixtures, cabinets, counter tops, window or door moldings, and bath tubs in accordance with the TCNA handbook. TCNA handbook, page 8, 9, 68, 69, and EJ171-05.
• Use a flexible modified white thin-set mortar that meets or exceeds ANSI 118.4 (a flexible acrylic mortar system such as those from Mapei, Laticrete, TEC, Customs, C-Cure, Siena, or equivalent). Follow the manufacturer’s instructions. Organic Mastic and Epoxy are not recommended for Penny Rounds.
• Use the correct size notch trowel depending on the size of the product and your desired results. In most cases a 5/32 x 5/32 v-notch trowel will be used. Do not allow the white thin-set to rise up in the joints. Make sure you achieve full contact between the back of the tile and thin-set; you may use a clean grout float to embed the metal.
• Allow the thin-set to cure according to the manufacturer’s instructions.
• 10. Use a modified grout. Grout with flexing capabilities or a flexible additive is preferred.

• 13. Read and follow all manufacturers instructions on the grout.

• Care and Maintenance

• Care and Maintenance for Borders

• Copper

• Although very tough, all metals can scratch or dent, use common sense when choosing the installed location.

Details

• Number of sheets in 1 quantity: 10
• Total coverage: 10 sqft
• Material: Metal, Glass
• Pattern: Pattern
• Fiberglass Mesh Backing

• 24 Tile Mural on 4 1/4" ceramic satin finish tiles. AMERICAN MADE !!
• Overall dimensions are approximately 25.5" wide x 17" tall
• This tile mural ships within 2 BUSINESS DAYS from receipt of order. Carefully wrapped and fully insured.
• Perfectly suitable for any indoor wall application (wet or dry) or outdoors in shaded areas (no direct sunlight)

• 6 Tile Mural on 6" ceramic satin finish tiles. AMERICAN MADE !!
• Overall dimensions are approximately 12" wide x 18" tall
• This tile mural ships within 2 BUSINESS DAYS from receipt of order. Carefully wrapped and fully insured.
• Perfectly suitable for any indoor wall application (wet or dry) or outdoors in shaded areas (no direct sunlight)

• Price per Sheet
• Picture show variations but true colors are solid
• Sheet : 11 1/4" x 11 1/2" - Size 3/4" in x 3/4" diameter
• 16 rows - 0.9 sq ft per sheet
• Penny Rounds are made of a metal cappin glued onto a porcelain tile body.

• Mosaics Metal Tile Penny Round Specifications and Care:
• Penny Rounds are made of a metal capping glued onto a porcelain tile body.
• The copper capping is made from solid copper. All other capping are made from grade 304 stainless steel. The different colors of stainless are produced by an anodizing process. Colors are V1 in shading. Brushed and stippled metal will be installed randomly on the sheet from the factory, in reference to the direction of the texture. This will give the appearance of different shades, and adds to the character of the product.
• The glue used to bond the metal to the porcelain base is German “Henkel” contact adhesive. It is temperature resistant to 158 degrees Fahrenheit, water resistant, and resistant to diluted acids and alkaline.
• Penny Round copper may be installed on interior wall areas, in wet or dry locations (such as a shower wall or kitchen backsplash). It may not be installed on floors. Through oxidization, all copper will patina (darken or turn dark green).
• Copper should not be used in steam showers, submerged areas, or exterior applications.
• Stainless steel should not be used in steam showers or submerged areas, but can be used in frost-free exterior applications. Both stainless and copper can scratch and dent.
• Make sure all product is inspected by the end user before installing to avoid any issues. No refunds or adjustments of any kind will be made by Flooringsupplyshop . com / International Flooring Center, Inc. after the product is installed. The installer is responsible for installing the correct material. Use constitutes acceptance.
• To cut, use a tile wet saw with a diamond blade designed for cutting porcelain. Target, Pearl, MK, and many other blade manufacturers make blades for porcelain. Always cut with the metal side up. It may be necessary to debur the edge of the metal with a rub stone or fine file. Always wear eye protection.
• Suggested Installation Method
• Always use a licensed contractor.
• Always confirm in person with the end user / specifier that the product being installed is the correct product before installing it, and is suitable for the project.
• Always inspect the product for unintended flaws that are not part of the fashion or style of the product. Do not install defective or damaged product. If there is a question about the quality of the product, contact your supplier before proceeding.
• Make sure the substrate is suitable for metal. Choose and follow the best technique for your project. See TCNA handbook, page 10 and all pages pertaining to substrate preparation.
• TCNA handbook, page 10. And all pages pertaining to substrate preparation. ANSI A108.1B, A108A2.1.8, C1396, C1396M-04 Make sure crack isolation membranes and water proofing membranes are considered for your type of installation where necessary.
• TCNA handbook, page 9, 10, ANSI a118.10, A108.12
• The metal may expand and contract differently than adjacent tile. Make sure expansion joints and movement joints are considered and used when necessary. Keep this product over six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and backsplashes behind cook tops. Extra soft joints may be required in these high heat areas. Use a soft (caulking) joint between the metal and any other material in a continuous installation. Use a soft joint where two different planes come together. Use a soft joint every six feet in a continuous run, or according to the TCNA handbook. Use a soft joint where the metal abuts to plumbing fixtures, cabinets, counter tops, window or door moldings, and bath tubs in accordance with the TCNA handbook. TCNA handbook, page 8, 9, 68, 69, and EJ171-05.
• Use a flexible modified white thin-set mortar that meets or exceeds ANSI 118.4 (a flexible acrylic mortar system such as those from Mapei, Laticrete, TEC, Customs, C-Cure, Siena, or equivalent). Follow the manufacturer’s instructions. Organic Mastic and Epoxy are not recommended for Penny Rounds.
• Use the correct size notch trowel depending on the size of the product and your desired results. In most cases a 5/32 x 5/32 v-notch trowel will be used. Do not allow the white thin-set to rise up in the joints. Make sure you achieve full contact between the back of the tile and thin-set; you may use a clean grout float to embed the metal.
• Allow the thin-set to cure according to the manufacturer’s instructions.
• 10. Use a modified grout. Grout with flexing capabilities or a flexible additive is preferred.

• 13. Read and follow all manufacturers instructions on the grout.

• Care and Maintenance

• Care and Maintenance for Borders

• Copper

• Although very tough, all metals can scratch or dent, use common sense when choosing the installed location.

• Design: Hammered Copper
• Outer Dimensions: 4" x 4"
• Quantity of 4
• Finish: Oil Rubbed Bronze (Dark Brown)
• 100% Recyclable
• Composition: 99.7% Pure Recycled Copper
• Lead Free (less than .01%)
• Patina: Fired
• Warranty: Limited Lifetime
• BRAND: Premier Copper Products

Important Note:

Tile Packages Suggested Accessories:

• Hammered Copper 8-in Round Cylinder Pendant Light (L900DB)
• Small Hammered Copper Tissue Box Cover (TBCSDB)
• Copper Switchplate Single Duplex, 2 Hole Outlet Cover - Quantity 4 (SO2_PKG4)
• Copper Sink Wax Protectant (W900-WAX)

• 5-piece/case; 1 case tile length: 5 Linear feet. Grade 1, first-quality metal decorative tile for wall use.
• Because of Hand Made slight variation (spontaneous shade variation) from tile to tile and within each tile. Approx dimensions: 9/16 x 12 Inches.
• Produced by first quality premium real metal and poly resin insert wall accent tile for commercial or residential indoor use

• Nature of handcrafted (handmade) tile on this product small variances on size, dimension, color, texture may occur.
• All resin metal products within coordinating series may be produced at different times which can cause variation in dye lot (color) and caliber (size)
• Which is authentic to tiles.
• Accent Your wall; Niche Tiles decorative tile liners and borders are designed to accent and finish any ceramic, glass or stone tile surface
• Sealing not required, permanently protected by special UV curing protective layer factory implemented

• Not frost resistant; P.E.I. Rating 0 is suitable only for wall accent tile commercial or residential indoor use
• Water absorption 0.5% - 3% for metal insert
• Please do not forget your coordinating trim pieces, grout, thinnest and installation tools
• Use a non-sanded grout for the trims, insert and murals
• Not frost resistant, indoor and wall use only

• Limited warranty only applies to Niche Tiles that are handled and installed in the manner specified in the relevant Niche Tiles Installation,
• Use and Care Instructions. Niche Tiles cannot accept responsibility for performance of the products from and after the time that they are installed.