FREE shipping on orders over $49!* Details
"Driveway Pavers" – search in Products
Sort by:
Price
19 Results
VEVOR 4-Piece Permeable Grass and Gravel Pavers 1.9" Depth Greenby VEVOR
$49
Free Shipping
Permeable Pavers 4 PCS
Designed for parking, landscaping and soil reinforcement in residential and commercial areas, VEVOR permeable paver made of recycled material HDPE is applicable in changeable weathers and PHs. It is stable with high compression strength and cuttable with saws. It can better fit your available areas when it is filled with gravels, pebbles or grass. Natural water infiltration can be achieved to avoid water accumulation and floods.
▽INTERLOCKING SYSTEM▼- The smart interlocking system is designed to help you assemble or disassemble this ground grid freely according to your needs, therefore sparing you many efforts.
▽FILLED WITH GRASS & GRAVEL▼- Pay attention that the plastic paver needs to be filled with gravel, sand to ensure enough support and weight capacity, thus implementing a natural infiltration of water for your ground.
▽POWERFUL STRENGTH & CUTTABLE▼- The compression strength is solid enough for cars and trucks since it withstands loads of at least 40 tons/sqm (11 sqf) when filled with aggregate, such as gravels or sand. It also can be cut adapted to ground edges, whether with a handsaw or electric saw.
▽DIVERSIFIED USES▼- The permeable grid is practical in both residential and commercial scenes such as driveways, paths, patios, parking lots, access roads, etc. (sloped or not) for full use of the available areas and ideal layout.
Designed for parking, landscaping and soil reinforcement in residential and commercial areas, VEVOR permeable paver made of recycled material HDPE is applicable in changeable weathers and PHs. It is stable with high compression strength and cuttable with saws. It can better fit your available areas when it is filled with gravels, pebbles or grass. Natural water infiltration can be achieved to avoid water accumulation and floods.
Features & Details
▽RELIABLE HDPE MATERIAL▼- Made of reliable HDPE, our permeable paver forms a bee nest-like shaped shell which allows for a firm structure and ensures stable performance under conditions of changeable climates and PHs.▽INTERLOCKING SYSTEM▼- The smart interlocking system is designed to help you assemble or disassemble this ground grid freely according to your needs, therefore sparing you many efforts.
▽FILLED WITH GRASS & GRAVEL▼- Pay attention that the plastic paver needs to be filled with gravel, sand to ensure enough support and weight capacity, thus implementing a natural infiltration of water for your ground.
▽POWERFUL STRENGTH & CUTTABLE▼- The compression strength is solid enough for cars and trucks since it withstands loads of at least 40 tons/sqm (11 sqf) when filled with aggregate, such as gravels or sand. It also can be cut adapted to ground edges, whether with a handsaw or electric saw.
▽DIVERSIFIED USES▼- The permeable grid is practical in both residential and commercial scenes such as driveways, paths, patios, parking lots, access roads, etc. (sloped or not) for full use of the available areas and ideal layout.
Specifications
- Model: 4 PCS Permeable Pavers
- Material: HDPE
- Color: Green
- Size: 50x50x5 cm (19x19x1.9 in)
- Compression Capacity: 40 tons/sqm (Minimum)
- Quantity: 4 pcs/sqm (11 sqf)
- Total Weight: 5.5 kg (12.13 lbs)
- Package Content
- 4 x Permeable Pavers
VEVOR 4-Piece Permeable Grass and Gravel Pavers 1.9" Depth Blackby VEVOR
$54
Free Shipping
Permeable Pavers 4 PCS
Designed for parking, landscaping and soil reinforcement in residential and commercial areas, VEVOR permeable paver made of recycled material HDPE is applicable in changeable weathers and PHs. It is stable with high compression strength and cuttable with saws. It can better fit your available areas when it is filled with gravels, pebbles or grass. Natural water infiltration can be achieved to avoid water accumulation and floods.
▽INTERLOCKING SYSTEM▼- The smart interlocking system is designed to help you assemble or disassemble this ground grid freely according to your needs, therefore sparing you many efforts.
▽FILLED WITH GRASS & GRAVEL▼- Pay attention that the plastic paver works better when it is filled with gravel, sand, or sodded with grass, thus implementing a natural infiltration of water for your ground.
▽POWERFUL STRENGTH & CUTTABLE▼- The compression strength is solid enough for cars and trucks since it withstands loads of at least 40 tons/sqm (11 sqf) when filled with gravels or sand. It also can be cut adapted to ground edges, whether with a handsaw or electric saw.
▽DIVERSIFIED USES▼- The permeable grid is practical in both residential and commercial scenes such as driveways, paths, patios, parking lots, access roads, etc. (sloped or not) for full use of the available areas and ideal layout.
Designed for parking, landscaping and soil reinforcement in residential and commercial areas, VEVOR permeable paver made of recycled material HDPE is applicable in changeable weathers and PHs. It is stable with high compression strength and cuttable with saws. It can better fit your available areas when it is filled with gravels, pebbles or grass. Natural water infiltration can be achieved to avoid water accumulation and floods.
Features & Details
▽RELIABLE HDPE MATERIAL▼- Made of reliable HDPE, our permeable paver forms a bee nest-like shaped shell which allows for a firm structure and ensures stable performance under conditions of changeable climates and PHs.▽INTERLOCKING SYSTEM▼- The smart interlocking system is designed to help you assemble or disassemble this ground grid freely according to your needs, therefore sparing you many efforts.
▽FILLED WITH GRASS & GRAVEL▼- Pay attention that the plastic paver works better when it is filled with gravel, sand, or sodded with grass, thus implementing a natural infiltration of water for your ground.
▽POWERFUL STRENGTH & CUTTABLE▼- The compression strength is solid enough for cars and trucks since it withstands loads of at least 40 tons/sqm (11 sqf) when filled with gravels or sand. It also can be cut adapted to ground edges, whether with a handsaw or electric saw.
▽DIVERSIFIED USES▼- The permeable grid is practical in both residential and commercial scenes such as driveways, paths, patios, parking lots, access roads, etc. (sloped or not) for full use of the available areas and ideal layout.
Specifications
- Model: 4 PCS Permeable Pavers
- Material: HDPE
- Color: Black
- Size: 50x50x5 cm (19x19x1.9 in)
- Compression Capacity: 40 tons/sqm (Minimum)
- Quantity: 4 pcs/sqm (11 sqf)
- Total Weight: 5.5 kg (12.13 lbs)
- Package Content
- 4 x Permeable Pavers
SX5000 DOT Silane Siloxane Concrete, Brick, Masonry Water Repellent Sealer, Clear, 1 Gallonby Foundation Armor(31)
$65
The Armor SX5000 is a high solids, Department of Transportation approved, solvent-based Silane-Siloxane water repellent and impregnating sealer for porous concrete and masonry surfaces. The Armor SX5000 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water absorption. The Armor SX5000 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film or coating. The Armor SX5000 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. The Armor SX5000 will also help to reduce the formation of efflorescence and the growth of mold and mildew.
Uses: Unsealed poured concrete, broom finished concrete, trowel finished concrete, stamped concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry.
Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications.
Uses: Unsealed poured concrete, broom finished concrete, trowel finished concrete, stamped concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry.
Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications.
Benefits:
- Contains up to 10X more active ingredients than similar products.
- Approved in several states by the Department of Transportation as a water repellent sealer.
- Will maintain the natural, unsealed look and feel of the substrate. Will never peel, flake or fade. UV resistant, non-yellowing. No surface film or coating to maintain.
- Resistant to freeze-thaw cycles and de-icing salts.
- Provides excellent resistance to mold, mildew, and fungus.
- Can be applied to interior/exterior, vertical/horizontal, above/below grade surfaces.
- Water and other liquids will bead off the surface of sealed concrete and masonry.
- Breathable, low VOC.
Best Seller
Warmlyyours Snow Melt Mat, 60 Sq. Ft (3' Width), 240 Voltsby WarmlyYours Radiant(21)
$679
Free Shipping
When you are designing a driveway made of pavers, asphalt, or concrete and you want it heated, WarmlyYours has the snow melting solution for you. We all know how disappointing it is to watch the snow fall every winter, knowing that it's only a matter of time before we have to bundle up and head outside to shovel the walkways and salt the stairs. Instead, imagine relaxing by the fireplace in the comfort of your home on a snowy winter day. With WarmlyYours snow melting systems, you can do just that.
- Covers 60 Sq. Ft
- Specs: 12.5 Amps, 19.20 Ohms, 3000 Watts, 240 Volts
- For applications under asphalt, concrete and pavers
Warmlyyours Snow Melt Cable, 10.75 Sq. Ft, 120 Voltsby WarmlyYours Radiant(27)
$225
Free Shipping
When you are designing a driveway made of pavers, asphalt, or concrete and you want it heated, WarmlyYours has the snow melting solution for you. We all know how disappointing it is to watch the snow fall every winter, knowing that it's only a matter of time before we have to bundle up and head outside to shovel the walkways and salt the stairs. Instead, imagine relaxing by the fireplace in the comfort of your home on a snowy winter day. With WarmlyYours snow melting systems, you can do just that.
- Covers 10.75 Sq. Ft at 3" Spacing (recommended)
- Specs: 4.17 Amps, 28.78 Ohms, 500 Watts, 120 Volts
- For applications under asphalt, concrete and pavers
Soreno Taupe 24X24 Matte Porcelain Paver, (4x4 or 6x6) Sampleby Buytilesandmore
$12
Free Shipping
Soreno Taupe features soft beige and light brown tones with a subtle pattern for a look reminiscent of natural stone. This large format pavers comes with neutral tones of the surfaces complement any architectural style and color palette. Extend the beauty of your interior space to the outdoors by using Soreno Taupe. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Soreno Grigio 24X48 Matte Porcelain Paver, (4x4 or 6x6) Sampleby Buytilesandmore
$12
Free Shipping
Soreno Grigio features contemporary smoky gray porcelain tiles for a stylish appearance indoors and out. The gorgeous, in-demand neutral tones of the surfaces complement any architectural style and color palette.Carry the flow of an interior room to the outdoors using Soreno Grigio. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
WAC Lighting Chamber LED Outdoor Post Light in Bronzeby WAC Lighting(12)
SALE
$408$479
Free Shipping
- Chamber LED Outdoor Post Light in Bronze
- Mounts on a 3" max diameter post (not included). Minimal mounting hardware for a simple installation.
- Light engine is factory sealed for maximum protection against the harshest elements.
- ACLED Technology, no driver or transformer required for easy installation into pancake junction box.
- Smooth and continuous dimming with an electronic low voltage (ELV) dimmer.
- Standards: ETL & cETL, and IP65 Rated for Wet Locations. CEC Title 24 Compliant and Dark Sky Friendly.
- Bulb Type: LED
- Bulb Base: LED Module
- Number of Bulbs: 1
- Watts Per Bulb: 17.5
- Total Wattage: 17.5
- Bulbs Included: Yes
- Dimmable: Yes
- Voltage: 120
- Bulb Shape: LED Module
- Color Temperature: 3000
- Color Rendering Index: 90
- Lumens: 1600
- Delivered Lumens: 660
- Beam Spread: Flood
- Average Hours: 44000
- Number of Lights: 1
- Reversible: Yes
- Safety Rating: ETL, cETL, IP65
- Location: Wet
- Interior/Exterior: Exterior
- Hardwired or Portable: Hardwired
- Energy Star: No
- Title 24 Compliant: Yes
- ADA Compliant: No
- Dark Sky: Yes
Best Seller
Pivotrim 17233 Trimmer Head For All Gas Trimmers, As Seen On Tvby Jarden Applied Materials(61)
$39
Free Shipping
Sick of broken and jammed trimmer lines? Tired of stopping to change broken trimmer lines? PivoTrim Trimmer Head is the ultimate solution! Tough enough to cut right through plywood, The PivoTrim is one of the best home investments you'll ever make! On other trimmer heads, strings exit the head at a fixed point- bending and weakening them until they break, but the PivoTrim patented pivot design allows the line to absorb the shock, reducing line wear and broken lines. Best of all, the PivoTrim Fits ANY gas trimmers (not battery or electric trimmers)!
- As Seen On TV
- Patented pivot action protects the trimmer line
- Instead of bending and breaking, the pivoting action saves your line
- Banging it on pavers, edging around driveways, and smashing into walls won't break the line
- Fits ANY gas trimmers (not battery or electric trimmers)
- Last up to 20 times longer for fewer stops & quicker jobs
- Ideal for clearing fields, edging sidewalks, driveways & trimming around chain link fences without breaking a line
- Easy to load & install
- Includes 4.5" (W) x 2" (H) & 4 pre-cut trimmer lines.
12-Pack Dimmable 120V LED Step Lights, 150LM 3.5W Stair Lightsby W86 Trading Co., LLC
$192
Free Shipping
3CCT Adjustable Color Temperature
3000K/4000K/5000K selectable color temperature, creates different sense of atmosphere according to your needs and mood. CRI90 shows the vivid colors of objects and adds interest to your life.
Use with Confidence
120V input voltage, no transformer required, so you don't have to worry about too many products connected to the same line causing the tail light not to light up, or accidentally exceed the maximum energy of the transformer and lead to transformer damage.
3000K/4000K/5000K selectable color temperature, creates different sense of atmosphere according to your needs and mood. CRI90 shows the vivid colors of objects and adds interest to your life.
Use with Confidence
120V input voltage, no transformer required, so you don't have to worry about too many products connected to the same line causing the tail light not to light up, or accidentally exceed the maximum energy of the transformer and lead to transformer damage.
- Compatible dimmers
- This light is 5%-100% dimmable and compatible with most LED dimmers on the market, making it the perfect choice for lighting up a conference room.
- Compatible with Lutron DV-600P, PD-6WCL, MACL-153M, 603P, Leviton DSL06, RNL06
NOTE
- It is recommended to adjust the color temperature before installation; junction box not included.
Specifications:
- Wattage: 3.5W
- Voltage: AC120V
- Luminescence: 150lm
- Lifespan: 30000hrs
- CCT: 3000K/4000K/5000K selectable
- Finish color: oil rubbed bronze
- Waterproof rating: Wet location
Soreno Taupe 24X24 Matte Porcelain Paver, 40 Sq.ftby Buytilesandmore
$925
Free Shipping
Soreno Taupe features soft beige and light brown tones with a subtle pattern for a look reminiscent of natural stone. This large format pavers comes with neutral tones of the surfaces complement any architectural style and color palette. Extend the beauty of your interior space to the outdoors by using Soreno Taupe. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Soreno Grigio 24X24 Matte Porcelain Paver, (4x4 or 6x6) Sampleby Buytilesandmore
$12
Free Shipping
Soreno Grigio features contemporary smoky gray porcelain tiles for a stylish appearance indoors and out. The gorgeous, in-demand neutral tones of the surfaces complement any architectural style and color palette.Carry the flow of an interior room to the outdoors using Soreno Grigio. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Concrete Sealer X-3, Stain and Water Repellent, 1 Gallonby Stone Technologies Corp
$85
Free Shipping
Concrete Sealer X-3 is a water based special blend of polysiloxanes/silanes which crosslink below the surface of the concrete making the concrete surface water and stain repellent allowing spills to be removed more easily. This sealer can either be applied alone or on top of Concrete Sealer X-1 or Concrete Sealer X-2 to provide double protection of the concrete with both deep sealing and a repellent finish. Concrete Sealer X-3 is also available in custom colors.
Concrete Sealer X-3 can be applied on all types of decorative and stained concrete pavers, concrete aggregate driveways and concrete walkways, bricks, clay tiles, mortar, grout and any natural stones. It can be used on above grade plaster and stucco providing a breathable barrier against water, stains and acids and will seal hair line cracks. The sealer can also be used to seal swimming pools and fish ponds to prevent water escaping through the concrete capillaries and pores. It can also be used in dog kennels and agricultural institutions to provide stain resistance which assists in the maintenance of these enclosures.
This concrete sealer leaves a natural finish (no sheen) after application and the surface will not be slippery.
Concrete Sealer X-3Concrete Sealer X-3 has also been proven as an effective anti-graffitti barrier helping to prevent paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do.
Concrete Sealer X-3 is a ready to use sealer and does not require the addition of an activator which means that it does not have a limited pot life unlike some competitive sealers and it has a shelf life of at least 6 months.
Concrete Sealer X-3 is easy to apply using a brush, medium nap roller or low pressure sprayer at any temperature between 40-80°F.
The surface to be treated does not need any special treatment but it must be water, oil and dust free to allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer to make sure it absorbs drops of water within 20-30 seconds, If it beads up then use Eco Concrete Etcher prior to applying this sealer. Coverage rate is approximately 200 to 400 sf/gal/app depending on the concrete porosity and two coats are recommended rather than one thick coat. Application time between coats is 30 minutes maximum and allow to cure for 24 to 48 hours without rain.
Concrete Sealer X-3 can be applied on all types of decorative and stained concrete pavers, concrete aggregate driveways and concrete walkways, bricks, clay tiles, mortar, grout and any natural stones. It can be used on above grade plaster and stucco providing a breathable barrier against water, stains and acids and will seal hair line cracks. The sealer can also be used to seal swimming pools and fish ponds to prevent water escaping through the concrete capillaries and pores. It can also be used in dog kennels and agricultural institutions to provide stain resistance which assists in the maintenance of these enclosures.
This concrete sealer leaves a natural finish (no sheen) after application and the surface will not be slippery.
Concrete Sealer X-3Concrete Sealer X-3 has also been proven as an effective anti-graffitti barrier helping to prevent paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do.
Concrete Sealer X-3 is a ready to use sealer and does not require the addition of an activator which means that it does not have a limited pot life unlike some competitive sealers and it has a shelf life of at least 6 months.
Concrete Sealer X-3 is easy to apply using a brush, medium nap roller or low pressure sprayer at any temperature between 40-80°F.
The surface to be treated does not need any special treatment but it must be water, oil and dust free to allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer to make sure it absorbs drops of water within 20-30 seconds, If it beads up then use Eco Concrete Etcher prior to applying this sealer. Coverage rate is approximately 200 to 400 sf/gal/app depending on the concrete porosity and two coats are recommended rather than one thick coat. Application time between coats is 30 minutes maximum and allow to cure for 24 to 48 hours without rain.
Ghostshied Siloxa-Tek® 8500 1 Gallon Ready to Useby Ghostshield(1312)
$80
An industrial-grade, water-based, silane/siloxane engineered to reduce water and moisture intrusion, while protecting concrete or masonry substrates from chlorides and deicing salts. Siloxa-Tek 8500 is our favorite product to treat nearly any application. A proprietary blend of silane/siloxanes, this clear penetrating sealer not only prevents deicing salt and freeze-thaw damage, but its hydrophobic nature resists moisture intrusion and vapor transmission. This is the go to choice to seal any concrete, brick, or masonry based substrate especially driveways, basements, patios and garages.
APPLICATIONS
A water repellent impregnating sealer is a surface applied, invisible, non-film forming protection system, that can very effectively increase the durability of concrete. Due to the small size of the mono-molecular layer, there is little or no change in its aesthetic appearance. Compared to film forming coating systems, the surface applied water repellent impregnating sealer penetrates the surface pores and capillaries, so they are internally lined but not filled. Water repellent impregnating sealers change the surface tension of mineral substrates that produce a water repellent surface to keep water and aggressive water-soluble salts, such as chlorides and sulfates, out.
In structures on and below grade water should generally be kept out and away to prevent damage. The most pervasive form of concrete damage is surface scaling from freeze-thaw. Other forms of damage include alkali-silica reaction (ASR), chemical intrusion and corrosion of steel reinforcements. Siloxa-Tek® 8500 can block up to 99% of surface moisture. The active ingredients seal the pores within the substrate adequately blocking surface moisture while still maintaining the concretes ability to breathe. It will not significantly modify substrate appearance or traction and will only wear away if the concrete surface itself wears away.
New or existing concrete can be treated and performance can be improved in as little as two applications. Siloxa-Tek® 8500 is a small investment that leads to long-term savings and improved performance.
Step 1: The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48 hours after rain and/or pressure washing before sealing; concrete should be visibly dry.
Step 4: If acid is used to clean the concrete, neutralize the surface completely and rinse it with water prior to application. Then wait for the concrete to dry out for at least 24-48 hours.
Step 7: When the entire application has been treated with two (2) coats, let the concrete dry for at least six (6) hours before walking, 24 hours before driving, and protect the concrete from rain for at least 24-48 hours after sealing.
APPLICATIONS
Exceptional when used for:
- Applications: Driveways/sidewalks, patios, pool decks, garages, chimneys, roof tiles
- Substrates: Concrete, concrete blocks/cinderblocks, brick, pavers, exposed aggregate, stucco, stone, slate, sandstone
- BENEFITS
- Water beading effect
- Excellent penetration
- Breathable substrate
- Easy application
- Tack free finish
- No appearance change
- Low VOCs
- DOT approved
- Prevents deicing salt/chloride damage
- Prevents Freeze-thaw damage
- Protects from spalling/pitting/cracking
- Resists mold/mildew growth
- Prevents efflorescence
- Reduces dirt pick up
- Resists water vapor transmission
- Resists ASR/Alkali attacks
- Reduces Water ingress
- Reduces Moisture intrusion
- Resists UV radiation
DESCRIPTION
- Siloxa-Tek® 8500 is an advanced, high performance, industrial strength water based concrete/masonry water repellent solution designed to reduce water and moisture intrusion. Approved by the Department of Transportation to protect a wide variety of mineral substrates including architectural concrete, concrete block, split face block, pavers, stucco, porous and dense brick, clay tile, exposed aggregate concrete, sandstone, and slate this unique formula incorporates leading molecular nanotechnology; putting an end to water and moisture migration through any porous cementitious substrate. Siloxa-Tek® 8500 is a uniquely transparent, blended formula with added enzymes and surfactants that aide in accelerating a penetrating disbursement. Thus eliciting a more effective, uniformed reaction between the formula and the concrete / masonry substrate it’s being applied to. Siloxa-Tek® 8500 provides a hydrophobic barrier beneath the surface and seals out moisture while remaining highly vapor permeable and chemically bonding with the substrate. The treated surfaces will show no change in visual appearance from application and the surface that will not chip, flake, delaminate or breakdown with UV light exposure.
- Available in a ready to use gallon or an industry first ultra-concentrated gallon where 1 gallon of Siloxa-Tek 8500 mixes with 4 gallons of water to make 5 gallons of sealer that will treat up to 1250 sq. ft. of concrete per coat.
A water repellent impregnating sealer is a surface applied, invisible, non-film forming protection system, that can very effectively increase the durability of concrete. Due to the small size of the mono-molecular layer, there is little or no change in its aesthetic appearance. Compared to film forming coating systems, the surface applied water repellent impregnating sealer penetrates the surface pores and capillaries, so they are internally lined but not filled. Water repellent impregnating sealers change the surface tension of mineral substrates that produce a water repellent surface to keep water and aggressive water-soluble salts, such as chlorides and sulfates, out.
In structures on and below grade water should generally be kept out and away to prevent damage. The most pervasive form of concrete damage is surface scaling from freeze-thaw. Other forms of damage include alkali-silica reaction (ASR), chemical intrusion and corrosion of steel reinforcements. Siloxa-Tek® 8500 can block up to 99% of surface moisture. The active ingredients seal the pores within the substrate adequately blocking surface moisture while still maintaining the concretes ability to breathe. It will not significantly modify substrate appearance or traction and will only wear away if the concrete surface itself wears away.
New or existing concrete can be treated and performance can be improved in as little as two applications. Siloxa-Tek® 8500 is a small investment that leads to long-term savings and improved performance.
- PREPARATION
Step 1: The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48 hours after rain and/or pressure washing before sealing; concrete should be visibly dry.
- Step 2: Remove all paints, previous sealers and/or adhesives before application.
Step 4: If acid is used to clean the concrete, neutralize the surface completely and rinse it with water prior to application. Then wait for the concrete to dry out for at least 24-48 hours.
- Step 5: The surface-zone moisture content of the concrete should not exceed 4%wt.
- Step 6: Cover all surrounding areas not intended to be coated.
- Step 7: New concrete must be cured for at least 28 days before sealing.
- APPLICATION – READY TO USE
- Step 1: Siloxa-Tek® 8500 Ready to Use is ready to use right out of the container. Stir extremely well before use.
- Step 3: Spray or roll one coat onto an area of approximately 100 square feet.
- Step 5: Roll or broom out any puddles until the sealer penetrates the substrate.
Step 7: When the entire application has been treated with two (2) coats, let the concrete dry for at least six (6) hours before walking, 24 hours before driving, and protect the concrete from rain for at least 24-48 hours after sealing.
- Step 8: Clean up: Application tools can be cleaned using soap and water.
- Step 9: If over-spray occurs it should be cleaned and removed immediately after sealing.
- Step 10: Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.
APPLICATION NOTES:
- Before application test the sealer by applying in an inconspicuous area to ensure the desired coverage and appearance is achieved.
- Do not over apply.
- Prevent from getting on glazed and finished surfaces such as glass, aluminum etc. In case of contact flush immediately with water.
- Does not prevent equipment leaks or other leaks such as oil, hydraulic fluid etc. Use the Siloxa-Tek® 8505 or Siloxa-Tek® 8510 for oil repellency and staining resistance.
- Do not use on concrete that has been previously sealed without chemically etching or mechanically scarifying.
- Water repellency may take up to seven (7) days to develop.
- TECHNICAL SPECS
- Feature: Water & salt repellent
- Chemistry: Silane/Siloxane
- Color: Clear
- Finish: Invisible
- Category: Penetrating
- Carrier: Water
- Availability: Ready to Use or Ultra Concentrate: Makes 5 Gallons
- Packaging: 1 Gallon Ready to Use
- Coverage: Ready to Use: 250 sq. ft. per coat
- Interior/Exterior: Interior/Exterior
- Application Method: Sprayer, Roller
- Application Temperature: 45 F - 90 F
- Number of Coats: 2
- Time Between Coats: 5 Minutes
- Drying Time (dry to touch): 6 Hours
- Drying time (full cure): 24 Hours
- Time before/after rain: 48 Hours
- New Concrete: Yes, at least 28 days after being poured
- Storage/Shelf Life: 1 Year
- Clean up: Soap/water
- Paintable: Yes, oil or enamel based paint; first test for compatibility
- VOC Content: 90 g/L
Soreno Grigio 24X48 Matte Porcelain Paver, 40 Sq.ftby Buytilesandmore
$970
Free Shipping
Soreno Grigio features contemporary smoky gray porcelain tiles for a stylish appearance indoors and out. The gorgeous, in-demand neutral tones of the surfaces complement any architectural style and color palette.Carry the flow of an interior room to the outdoors using Soreno Grigio. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
6 Pack 3CCT 120V LED Step Lights Dimmable 3000K/4000K/5000K Selectableby W86 Trading Co., LLC
$164
Free Shipping
3CCT Adjustable Color Temperature
3000K/4000K/5000K selectable color temperature, creates different sense of atmosphere according to your needs and mood. CRI90 shows the vivid colors of objects and adds interest to your life.
Use with Confidence
120V input voltage, no transformer required, so you don't have to worry about too many products connected to the same line causing the tail light not to light up, or accidentally exceed the maximum energy of the transformer and lead to transformer damage.
3000K/4000K/5000K selectable color temperature, creates different sense of atmosphere according to your needs and mood. CRI90 shows the vivid colors of objects and adds interest to your life.
Use with Confidence
120V input voltage, no transformer required, so you don't have to worry about too many products connected to the same line causing the tail light not to light up, or accidentally exceed the maximum energy of the transformer and lead to transformer damage.
- Compatible dimmers
- This light is 5%-100% dimmable and compatible with most LED dimmers on the market, making it the perfect choice for lighting up a conference room.
- Compatible with Lutron DV-600P, PD-6WCL, MACL-153M, 603P, Leviton DSL06, RNL06
NOTE
- It is recommended to adjust the color temperature before installation; junction box not included.
Specifications:
- Wattage: 3.5W
- Voltage: AC120V
- Luminescence: 150lm
- Lifespan: 30000hrs
- CCT: 3000K/4000K/5000K selectable
- Finish color: oil rubbed bronze
- Waterproof rating: Wet location
Soreno Grigio 24X24 Matte Porcelain Paver, 40 Sq.ftby Buytilesandmore
$930
Free Shipping
Soreno Grigio features contemporary smoky gray porcelain tiles for a stylish appearance indoors and out. The gorgeous, in-demand neutral tones of the surfaces complement any architectural style and color palette.Carry the flow of an interior room to the outdoors using Soreno Grigio. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Ghostshield Cryli-Tek® 5500by Ghostshield(1)
$75
An industrial-grade, water-based, breathable, acrylic sealer that enhances, protects, and provides a clear, low-sheen finish. Cryli-Tek 5500 is the industry’s highest performing decorative sealer. This unique formula leaves the surface with a clear, low sheen, non-yellowing, satin finish. This product has an extremely fast set time and unsurpassed stain resistance. The treated surfaces will resist chipping, flaking, delamination and breakdown with UV light exposure.
APPLICATIONS
Step 1: The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48 hours after rain and/or pressure washing before sealing; concrete should be visibly dry.
Step 4: If acid is used to clean the concrete, neutralize the surface completely and rinse it with water prior to application. Then wait for the concrete to dry out for at least 24-48 hours.
Step 6: When the entire application has been treated, let the concrete dry for at least six (6) hours before walking, 24 hours before driving, and protect the concrete from rain for at least 24-48 hours after sealing.
APPLICATIONS
Exceptional when used for:
- Substrates: Concrete, stamped concrete, pavers, exposed aggregate, stone
- Applications: Patios, pool decks, driveways, walkways
- BENEFITS
- Easy to clean surface
- Enhanced surface appearance
- Durable satin finish
- Easy to apply
- Low VOC’s
- Reduces dirt pick up
- Prevents mold/mildew growth
- Prevents water ingress
- Resists weathering
- Resists carbonation, weak acids and alkaline solutions
- Wind erosion and general exposure resistant
- Resists UV degradation
- PREPARATION
Step 1: The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48 hours after rain and/or pressure washing before sealing; concrete should be visibly dry.
- Step 2: Remove all paints, previous sealers and/or adhesives before application.
Step 4: If acid is used to clean the concrete, neutralize the surface completely and rinse it with water prior to application. Then wait for the concrete to dry out for at least 24-48 hours.
- Step 5: The surface-zone moisture content of the concrete should not exceed 4%wt.
- Step 6: Cover all surrounding areas not intended to be coated.
- Step 7: New concrete must be cured for at least 28 days before sealing.
- APPLICATION
- Step 1: Cryli-Tek® 5500 is ready to use right out of the container. Stir extremely well before use.
- Step 2: Pour the Cryli-Tek® 5500 into a paint tray or bucket. Dip a good quality 3/8" nap roller into the tray or bucket.
- Step 4: Roll out any puddles until the sealer penetrates the substrate.
Step 6: When the entire application has been treated, let the concrete dry for at least six (6) hours before walking, 24 hours before driving, and protect the concrete from rain for at least 24-48 hours after sealing.
- Step 7: Clean up: Application tools can be cleaned using soap and water.
- Step 8: Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.
APPLICATION NOTES:
- Before application test the sealer by applying in an inconspicuous area to ensure the desired coverage and appearance is achieved.
- Do not apply to damp or wet concrete.
- Do not apply too thick of an application.
- Do not use in immersion service or constant chemical exposure areas.
- Extremely porous substrates such as pavers may require additional coats to achieve a slight enhancement.
- TECHNICAL SPECS
- Feature: Decorative sealer
- Chemistry: Acrylic
- Color: Clear
- Finish: Satin, low sheen
- Category: Coating
- Carrier: Water
- Availability: Ready to use
- Packaging: 1 Gallon
- Coverage: 250 sq. ft. per gallon
- Interior/Exterior: Interior/Exterior
- Application Method: Roller
- Application Temperature: 45 F - 90 F
- Number of Coats: 1
- Drying Time (dry to touch): 3-5 Hours
- Drying time (full cure): 24 Hours
- Time before/after rain: 48 Hours
- New Concrete: Yes, at least 28 days after being poured
- Storage/Shelf Life: 1 Year
- Clean up: Soap/water
- Paintable: No
- VOC Content: 80 g/L
Electric Snow Melting Kit With with Heating Mat and Control, 60 Sq. Ft (Pair ofby WarmlyYours Radiant(3)
$3,053
Free Shipping
This electric snow melting kit is designed to be embedded in a driveway to provide 2 heated tire tracks (2" x 30") that will keep your driveway passable even in the dead of winter. Using this tire tracks format of heating is an extremely cost effective way to enjoy the benefits of snow melting as it cuts down on both material costs and operating costs without sacrificing functionality. The included mats have an impressive heat output of 50 watts per square foot for dependable and efficient snow melting performance.
It includes an automatic, configurable snow melting controller with several different operation methods. The control offers a manual override option and an adjustable hold-on timer, which allows heater operation for up to 8 hours after the precipitation event ends to ensure evaporation of the melted snow. This kit also includes an NEC-required plaque and an aerial-mounted snow sensor that provides versatile and cost-effective automatic snow detection.
It includes an automatic, configurable snow melting controller with several different operation methods. The control offers a manual override option and an adjustable hold-on timer, which allows heater operation for up to 8 hours after the precipitation event ends to ensure evaporation of the melted snow. This kit also includes an NEC-required plaque and an aerial-mounted snow sensor that provides versatile and cost-effective automatic snow detection.
- Covers 60 Sq. Ft (per mat)
- Specs (per mat): 12.5 Amps, 19.20 Ohms, 3000 Watts, 240 Volts
- For applications under asphalt, concrete and pavers
You have searched for Driveway Pavers and this page displays the best product matches we have for Driveway Pavers to buy online in April 2024. We carry millions of home products with free shipping from furniture and decor to lighting and renovation. If you can’t find the product you want in the search results for Driveway Pavers, you can try refining your search. Houzz: a premium shopping experience for all of us.