Patina Design Architects
Patina Design Architects is a full-service architectural firm and our name embodies our primary philosophy of design: that the built environment needs to not only be designed to function well, but be timeless, built with sustainability in mind and with a quality that will endure, and will develop a rich 'patina' over time, and age gracefully.

We believe that homes and commercial spaces can, and should, enhance our environment and lives. This happens when buildings are carefully located upon the site, are well designed, thoughtfully reflect the needs and values of the people involved, and incorporate construction materials and techniques that are sustainable and lessen the impact on our environment.

We believe the best projects occur when client, architect, and builder work together as a truly collaborative team and respect what the others bring to the process.

Services Provided
3D Home Design, Home Restoration, Remodeling, Sustainable Design

Areas Served
Bainbridge Island, Bremerton, Chico, Indianola, Poulsbo, Rollingbay, Silverdale, Suquamish

Certifications and Awards
WA State Architectural Registration
Contact: Jeff Garlid
Location: 9975 N.E. Knight Rd.
Bainbridge Island, WA 98110
License Number: WA State Arch. Reg. # 5953
Commented: lighting Hi Rachel, Thanks for the question. We used the Belfer 6215-RAW (Raw Alum. finish) Wallwash Uplights there. Hope this helps!
in Photo Questions  
Commented: Is the flooring concrete? Hi bradcp, Yes the floor is a 4" thick, radiantly-heated concrete slab, and the owners applied the 'charcoal' stain (I don't have a record of the manuf.), and sealed the floor themselves during t...
in Photo Questions  
Commented: Lovely Kitchen! What are the max and min heights of the vaulted ceilin Hi ssadagopan, So sorry for the long delay in answering your question! The bottom of the beams on the low side are 9'-1" above the concrete slab floor, and the bottom of the ceiling car-decking ...
in Photo Questions  
Commented: What colour is the metal roof? Hi Debbie, The metal roofing was supplied by Champion Metal of WA, and is their 'Snap-Loc' profile (12" wide panels w/ concealed fasteners) in 'Charcoal'.
in Photo Questions  
Commented: Glulam end caps are they bespoke or of the shelf ? Hi washed-up, Yes, we had these fabricated from galvalume metal flat stock by a local heating subcontractor. They are very used to folding metal into whatever shape they need, and these end caps, wit...
in Photo Questions  
Commented: Where did you source the lights between the ceiling beams? Hi Bruce, And sorry for the delay in answering your question. We used JUNO light track, fixtures (TLP316FROST & R541BL), and accessories for this project, and had the electrician cut the light t...
in Photo Questions  
Patina Design Architects added a product to Ideabook: Lukasik / Leyh