Moore Construction
9 Reviews
Denmark Construction is a North County San Diego based custom home builder. We specialize in large scale remodels and custom tailored homes. The owner, Mike Moore, has been a LEED Accredited Professional since 2009 with a passion for sustainable building which is a cornerstone of Denmark's philosophy. Whether you have a "bar napkin sketch" of your ideas or completed plans we can provide you with budgets, design assistance and/or complete construction services for your project.

We can typically construct a single family home with an "upgraded" spec level which would include tile or hardwood floors, solid wood cabinets with soft-close hardware, granite or other higher end counters, fully tiled master shower with glass enclosure, Moen, Delta or comparable fixtures, tankless hot water heater, vaulted truss ceiling, concrete tile (flat or "S") or shingle roof, stucco exterior with architectural accents and 4-tone paint scheme for around $150/sf. This cost would include all work from pouring the foundation up. It would not include any earthwork or site work. Each building site can vary dramatically but we typically can perform the site work for around $10,000.

For additions the cost typically comes in closer to $175-$200/sf for the same spec level. Factors for this include a reduction in the economy of scale, slowed production and a more delicate building process having to work around and save existing, adjacent structures.

Services Provided
Depending upon our clients desires and budget, we can provide enhanced design features such as:
exposed hewn beams
custom one of a kind built-in cabinetry
finish carpentry upgrades
full landscaping services
exterior upgrades such as stone or siding
sustainable design features including grey water systems
solar panels
geo-thermal heat pumps
hardscape designs

Areas Served
San Diego & Riverside Counties, CA

Certifications and Awards
LEED AP
BPI Certified
Green Plumber America rated
Contact: Mike Moore
Location: PO Box 2685
Carlsbad, CA 92018
License Number: 984791
Typical Job Costs: $100,000 - 12,000,000
For basic, non-upgraded homes ~$125/sf (entry level, HUD or section 8 spec level). Upgraded homes ~$150/sf (mid-level, tract home spec). Fully custom, high end ~$200/sf and up. Additions to single family homes start around $175-$200/sf and can go up from there.
Commented: great wall treatment - is that tile? Hi, see link below for tile info! http://www.porcelanosa-usa.com/products/tile/qatar-nacar.html
in Photo Questions  
Commented: Can you give me detail on the cabinets and where to get? Walnut veneer with plywood box. Custom made by Nilson-Winter Construction http://jnilsondesign.com/ 3230-C Production Avenue Oceanside, California 92058 Tel: (760) 439-4001 Email: jeff@jnilsondesigns...
in Photo Questions  
Commented: Who is the maker for the wood vanity? Custom made walnut piece by Nilson-Winter Construction http://jnilsondesign.com/ 3230-C Production Avenue Oceanside, California 92058 Tel: (760) 439-4001 Email: jeff@jnilsondesigns.com
in Photo Questions