Copper Bathroom Sink and Faucet Parts

SimplyCopper drains fit a US Standard 1.5" drain opening. Beautifully designed for your copper sink, our drains will add the finishing touch, finished in our Aged Copper for a perfect match.

• Fits 1 1/2" Opening with a 1 1/4" Tailpiece
• Non Over Flow
• Top measures 2 1/4"
• Daisy Drain does NOT hold water
• Finished in Aged Copper, fully finished for exposed installations.
• Brass Construction

SimplyCopper drains fit a US Standard 1.5" drain opening. Beautifully designed for your copper sink, our drains will add the finishing touch, finished in our Oil Rubbed Bronze for a perfect match.

• Fits 1 1/2" Opening with a 1 1/4" Tailpiece without Overflow
• Top measures 2 1/4"
• Lift n Turn to hold water
• Finished in Oil Rubbed Bronze, fully finished for exposed installations.
• Brass Construction

Complete your sink with this vessel umbrella drain and mounting ring from Miseno. Constructed of solid brass and plated with a lifelong finish for trouble-free use. Designed to work with glass, stone, ceramic or any sink with a 1.75-inch drain opening, this umbrella drain will not work with most copper bath sinks or drain openings less than 1.75-inches. The drain assembly includes two rubber seals and a brass fastener for easy installation. The high-quality mounting ring will complement any vessel sink with a rounded bottom. Measuring 3 inches in diameter by 3/8 inch high, the ring is to be installed between the vessel sink's bottom and the top of the counter. It is constructed of solid brass for strength and durability. Supreme packaging and double boxing ensure damage-free delivery. Miseno MD-UPD-MR Features: Covered under a manufacturer limited lifetime warranty Constructed of solid brass Mounting ring included All hardware required for installation is included Miseno MD-UPD-MR Specifications: Height: 9-1/4" (top to bottom) Width: 1-3/4" (left to right) Diameter: 1-3/4" (across the drain)

Grid Style Drain for Lavatory Sinks Fits standard 1.5" drain opening Grid-style drain with no overflow Use with Vessel-style lavatory sinks

SharkBite® Tees are push-to-connect and are capable of connecting copper, PEX, CPVC, or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions. SharkBite® fittings are certified for potable water supply and hydronic heating applications as well.

• 1/4" (3/8" OD) x 1/4" (3/8" OD) x 1/4" (3/8" OD)
• For use with copper tubing copper tube size, CPVC & pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE 1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380
• Bagged.

Complete your sink with this umbrella drain from Miseno. Designed with extra long threading for thick counters and sinks. Also a great fit where the look of a pop-up is wanted but the sink does not need to be plugged to hold water. Constructed of solid brass and plated with a lifelong finish for trouble-free use and designed to work with glass, stone, ceramic or any sink with a 1.75-inch drain opening. This umbrella drain will not work with most copper bath sinks or drain openings less than 1.75-inches. The umbrella top simply unscrews off for quick and easy cleaning. The drain assembly includes two rubber seals and a brass fastener for easy installation. Supreme packaging and boxing ensure damage-free delivery. Miseno MD-UPD Features: Covered under a manufacturer limited lifetime warranty Constructed of solid brass All hardware required for installation is included Miseno MD-UPD Specifications: Height: 9-1/4" (top to bottom) Width: 1-3/4" (left to right) Diameter: 1-3/4" (across the drain)

Decorative pop-up mushroom drain no overflow will accommodate counter tops up to 2" thickness overall dimensions: 2 3/4" dia. x 8"H

The elegant Dome Drain from Native Trails is specifically designed to provide for unobstructed flow, giving it a distinct advantage over other similar-looking drains. High quality plating and thicker gauge metal make all Native Trails bathroom sink drains the best of class. Available in finishes that perfectly coordinate with Native Trails' hand hammered copper and nickel sinks and NativeStone concrete sinks.

Features:

• Functions like a grid drain but elegantly covers entire drain opening
• High quality finish will resist rust and corrosion through everyday use
• All hardware required for installation is included
• Lavatory application
• Covered under Native Trails one year warranty

Item 17279 Drains: This standard pop-up drain is made of solid brass for maximum strength and durability. This standard design fits a wider range of Ceramic or Porcelain sink drains, up to a 1 3/4 in. drain opening. There is an Overflow for sinks with an overflow. Its Tarnish-FREE Antique Copper finish top always looks trendy and is virtually Maintenance-FREE. Built-in stopper, it's easy just press down! For use with most ceramic or Porcelain sinks, fits up to 1 3/4 in. drain opening.

The 1.5” Teardrop Drain is a stylish lavatory drain. Its larger-sized teardrop-shaped holes and its slightly domed shape provide superior drainage, preventing drainage-blocking bubbles from forming and stopping items that just shouldn’t go down. High quality plating and thicker gauge metal make all Native Trails drains the best of class. Available in finishes that perfectly coordinate with Native Trails' hand-hammered copper and nickel sinks and NativeStone sinks.

Features:

• Large 9-hole design allows for quicker drainage
• High quality finish will resist rust and corrosion through everyday use
• All hardware required for installation is included
• All exposed parts are plated
• 1.5" drain
• Lavatory application
• Covered under Native Trails one year warranty

Solid Copper - 3.5" Basket Strainer Copper Sink Drain

The Kingston Brass metal lever handle provides effortless mobility and style for easy adjustment of water temperature and volume. This will enhance a home with a traditional theme. Kingston Brass KBH60ALH Features: Covered under Kingston Brass's 1 year limited warranty Coordinates with other items from the Magellan line seamlessly Lever style handle, ensuring a perfect match with your current fixtures Kingston Brass KBH60ALH Specifications: Height: 2-5/16" (top to bottom) Width: 3-9/16" (left to right)

Complete your sink with this umbrella drain from Miseno. Designed with extra long threading for thick counters and sinks. Also a great fit where the look of a pop-up is wanted but the sink does not need to be plugged to hold water. Constructed of solid brass and plated with a lifelong finish for trouble-free use and designed to work with glass, stone, ceramic or any sink with a 1.75-inch drain opening. This umbrella drain will not work with most copper bath sinks or drain openings less than 1.75-inches. The umbrella top simply unscrews off for quick and easy cleaning. The drain assembly includes two rubber seals and a brass fastener for easy installation. Supreme packaging and boxing ensure damage-free delivery. Miseno MD-UPD Features: Covered under a manufacturer limited lifetime warranty Constructed of solid brass All hardware required for installation is included Miseno MD-UPD Specifications: Height: 9-1/4" (top to bottom) Width: 1-3/4" (left to right) Diameter: 1-3/4" (across the drain)

The Female Center Slip Tee is the perfecting fitting to add an expansion tank for your water heater and other similar applications. The slip tee allows for the fitting to be connected to the pipe and, using the Disconnect Clips, slipped back onto the other end of the pipe without the need for additional pipe or tubing. The FNPT branch is threaded so that you can directly connect the expansion tank after installing the tee to the line. This product is rated to 200°F and 200 PSI, and can be easily rotated on the pipe after installation making it much easier to work in tight spaces.

• 1/2" x 1/2" x 1/2" FNPT
• For use with copper tubing copper tube size, CPVC & pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE 1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380
• Bagged.

Kingston Brass K461B Features: Covered under Kingston Brass's 1 year limited warranty Constructed of brass and stainless steel Coordinates with products from the Tacoma line For use in applications without overflow Fits 1-1/2" drain connections All hardware required for installation is included Kingston Brass K461B Specifications: Height: 1-1/2" (top to bottom) Width: 2-13/16" (left to right) Drain Connection Size: 1-1/2"

1/2 in. O.D. x 20 in. annealed brass lavatory supply riser, adds the finishing touch to any installation. Its trimm-able end allows cutting to length for easier installation. The top bullnose portion attaches to sink faucets, using a brusnwick nut (Not included - comes with most faucets). Made from lead free brass and fully finished for exposed installation, its sleek appearance gives shame to common flexible supply lines.

Features:

• 1/2" x 20" faucet supply tube
• Bullnose end for faucet connection
• Lead free annealed brass tube

SharkBite Female Connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required. These fittings are rated to 200°F and 200 PSI.

• 1" x 1" FNPT Straight
• For use with copper tubing CTS, CPVC & Pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380.

This Drop Ear Elbow is used to transition from Copper, PEX, CPVC or PE-RT to threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface, such as a stud or wall, and they provide additional stability. Compatible with copper, CPVC and PEX pipe and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection, and their specially formulated O-ring compresses to create a perfect watertight seal.

• 1/2" x 1/2"
• For use with copper tubing CTS, CPVC & Pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380
• Bagged.

SharkBite® Tee is push-to-connect and capable of connecting copper, PEX, CPVC, or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions. SharkBite® fittings are certified for potable water supply and hydronic heating applications as well.

• 3/4" x 3/4" x 3/4"
• For use with copper tubing copper tube size, CPVC & pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE 1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380
• Bagged.

The SharkBite® Slip Coupling is a plumbing repair fitting that allows you to make quick, easy repairs to Copper or CPVC pipe. This fitting allows up to 2 inches of damaged pipe to be removed and repaired. When making a repair, simply cut out a section of pipe no greater than 2 inches, and connect the slip end of the fitting onto one side. Then, take the Disconnect Clip and slide the slip end of the fitting along the pipe to connect the other pipe. The slip coupling is particularly useful for burst or frozen pipes.

• 1/2" x 1/2"
• Sharkbite push fit fittings for use with copper tubing copper tube size and CPVC
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE 1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380
• Bagged.

For use with copper tubing copper tube size, CPVC & pex with integral tube liner included. Certified to 200 PSI & 200 degrees fahrenheit. This is easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue. These fittings are certified for use with Copper, PEX, CPVC or PE-RT tubing.

• 3/4" x 1/2" x 1/2"
• For use with copper tubing CTS, CPVC & pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE 1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380
• Bagged.

This SharkBite® End Cap is push-to-connect and the easiest way to cap off your Copper, PEX, CPVC, or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. This is rated for up to 200 PSI and 200°F.

• Size: 1"
• For use with copper tubing CTS, CPVC & pex with integral tube liner included
• Constructed of DZR brass
• Certified to 200 PSI & 200 degrees fahrenheit
• Design certified to ASSE 1061/NSF61 standards
• Meets UPC, IPC & CUPC requirements
• Fittings are listed with IAPMO & are certified for use on potable & hydronic water distribution
• Certified for underground applications & as a manufactured joint without the need for access panels
• Lead free compliant to federal law 111-380.

Thompson Traders TDP15 Features: Soft touch pop-up drain only Thompson Traders TDP15 Specifications: Drain Size: 1-1/2"

Item 27279 (2) pieces Drains Pack of 2: This standard pop-up drain is made of solid brass for maximum strength and durability. This standard design fits a wider range of Ceramic or Porcelain sink drains, up to a 1 3/4 in. drain opening. There is an Overflow for sinks with an overflow. Its Tarnish-FREE Antique Copper finish top always looks trendy and is virtually Maintenance-FREE. Built-in stopper, it's easy just press down! For use with most ceramic or Porcelain sinks, fits up to 1 3/4 in. drain opening.

Whitehaus Collection's bathroom accessories work with our current products. Complete the look with a Decorative pop-up mushroom drain with overflow in the finish that matches your decor.

• Drain will accommodate counter tops up to 2" thick
• Overflow
• 2 1/2" diameter
• 2 1/2" diameter

1.5" Strainer with Dome Copper Sink Drain

DRAINS AND TRAPS
The Whitehaus Collection surpasses any industry standards by creating the most innovative designs that transform the most essential rooms of your the home - the kitchen and bath - into reflections of the homeowners' personal style. Whitehaus Collection has been raising the bar in the decorative arena for over a decade by providing high-end decorative plumbing fixtures that range in design from modern, to eastern-influenced, to traditional. Our products are not only aesthetically eye-catching. They are finely crafted to withstand the test of time, children, guests, and other unforeseen forces. Whitehaus Collection is your source for original designs and imports of quality decorative plumbing fixtures to be found in the kitchen and bath. From traditional to contemporary design, we bring to you a broad selection of styles and finishes for sinks, faucets, and bath accessories.

Getting the perfect match between your sink and your accessories is important for a beautiful space. Sinkology drains are designed to match our unique sink materials and finishes. With an ultra-durable solid brass construction that is hand-finished, our drains are beautiful and functional. Our lifetime warranty guarantees the durability of this strainer for as long as you own it.

• Dimensions: 2.8" x 2.8" x 2.75"
• Designed to fit the Angelico 15” bar and prep sink
• Fits 2” drain size
• Basket strainer features removable basket for easy cleaning
• Solid brass construction
• Protected by our lifetime warranty
• Antique Copper is aged to a medium-to-light tone for that classic copper look

Recommended Products:

• Angelico Copper 15" Single Bowl Drop-In Kitchen Bar/Prep Sink (#KPD-1515HA)

High quality drains fit a US Standard 1.5" drain opening. Beautifully designed for your copper sink, this will add the finishing touch. Made to last with a beautiful Aged Copper Finish.

• Specs
• Fits 1 1/2" Opening with a 1 1/4" Tailpiece
• Non-Overflow
• Top measures 2 1/4"
• Tail Pipe 8"
• 2-1/2" threaded drain body
• Pop-Up Spring Mechanism (will hold water)
• Finished in Aged Copper, fully finished for exposed installations.
• Brass Construction

Durable functional and beautiful our non-overflow pop-up style drains for bathroom sinks are made of solid brass to endure strength and durability. This oil rubbed bronze finish will not only Complement our copper sinks perfectly they will also match a variety of different sink materials and colors.

1.5" Non-Overflow Pop-up Bathroom Sink Drain in Oil Rubbed Bronze Features:

• Configuration: Non-Overflow
• Design: Push Pop Top
• Color: Oil Rubbed Bronze
• Down Pipe Width: 1.25"
• Upper Flange Dimension: 2"
• Push Pop Cap Dimension: 2.5"
• Overall Length: 8.75"
• Thread Length: 2.75"
• Installation Type: Compression Threaded
• Material: Brass
• Drain Size: 1.5"
• Packaging Recycled Cardboard Box
• Prop 65 Compliant
• Warranty: 2-Year Limited

INCLUDED:

Care Instructions:

• Mounting Instructions
• Warranty Information

Drain Suggested Accessories:

• Copper Sink Installation Silicone (C900-ORB)
• Copper Sink Wax Protectant (W900-WAX)
• Hammered Copper Waste Bin / Trash Can (TC11DB)
• Large Hammered Copper Tissue Box Cover (TBCLDB)

Durable functional and beautiful our overflow pop-up style drains for bathroom sinks are made of solid brass to endure strength and durability. This oil rubbed bronze finish will not only Complement our copper sinks perfectly they will also match a variety of different sink materials and colors.

1.5" Overflow Pop-up Bathroom Sink Drain in Oil Rubbed Bronze Features:

• Configuration: Overflow
• Design: Push Pop Top
• Color: Oil Rubbed Bronze
• Down Pipe Width: 1"
• Upper Flange Dimension: 2"
• Push Pop Top Dimension: 2.5"
• Drain Length: 8.75"
• Installation Type: Compression Threaded
• Material: Brass
• Drain Size: 1.5"
• Packaging Recycled Cardboard Box
• Prop 65 Compliant
• Warranty: 2-Year Limited

INCLUDED:

• Care Instructions
• Mounting Instructions
• Warranty Information

Drain Suggested Accessories:

• Copper Sink Installation Silicone (C900-ORB)
• Copper Sink Wax Protectant (W900-WAX)
• Hammered Copper Waste Bin / Trash Can (TC11DB)
• Large Hammered Copper Tissue Box Cover (TBCLDB)

The 1.5” Push to Seal Dome Drain allows for complete closure of the drain and opening of the drain, as needed. Push down to close the drain; push again to open. The Push to Seal Dome Drain has maximum threading to create a snug fit. High quality plating and thicker gauge metal make all Native Trails drains the best of class. Available in finishes that perfectly coordinate with Native Trails' hand hammered copper and nickel sinks and NativeStone concrete sinks.

Features:

• Features a forged brass nut and heavy 17 gauge tube
• High quality finish will resist rust and corrosion through everyday use
• All hardware required for installation is included
• All exposed parts are plated
• 1.5" drain
• Lavatory application
• Covered under Native Trails one year warranty

From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period Traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.

• Welcome to Simply Copper
• DISCOVER THE OLD WORLD BEAUTY OF OUR HANDMADE COPPER SINKS
• EASY TO CARE FOR, EACH SINK IS ONE OF A KIND!

SimplyCopper drains fit a US Standard 1.5" drain opening. Beautifully designed for your copper sink, our drains will add the finishing touch, finished in our Aged Copper for a perfect match.

• Specs
• Fits 1.5" Opening with a 1.25" Tailpiece without Overflow
• Top measures 2.25"
• Tail Pipe 8"
• 2.5" threaded drain body
• Lift and Turn to hold water
• Finished in Aged Copper, fully finished for exposed installations.
• Brass Construction

SimplyCopper drains fit a US Standard 1.5" drain opening. Beautifully designed for your copper sink, our drains will add the finishing touch, finished in our Aged Copper for a perfect match.

• Fits 1 1/2" Opening with a 1 1/4" Tailpiece without Over Flow
• Drain will NOT HOLD WATER
• Top measures 2 1/4"
• Tail Pipe 8"
• 2-1/2" threaded drain body
• 19 Hole Grid Drain does NOT hold water
• Finished in Aged Copper, fully finished for exposed installations.
• Brass Construction

Durable functional and beautiful our garbage disposal drains for kitchen sinks are made of solid brass to endure strength and durability. This polished brass finish will not only Complement our brass sinks perfectly they will also match a variety of different sink materials and colors. They are Insinkerator brand compatible.

1.5" Non-Overflow Grid Bathroom Sink Drain in Polished Brass Features:

• Configuration: Non-Overflow
• Design: Teardrop Grid
• Color: Polished Brass
• Down Pipe Width: 1.25"
• Upper Flange Dimension: 2.25"
• Overall Length: 8.75"
• Thread Length: 2.5"
• Installation Type: Compression Threaded
• Material: Brass
• Drain Size: 1.5"
• Packaging Recycled Cardboard Box
• Prop 65 Compliant
• Warranty: 2-Year Limited

INCLUDED:

• Care Instructions
• Mounting Instructions
• Warranty Information

Drain Suggested Accessories:

• Copper Sink Installation Silicone (C900-ORB)
• Copper Sink Wax Protectant (W900-WAX)
• Hammered Copper Waste Bin / Trash Can (TC11DB)
• Large Hammered Copper Tissue Box Cover (TBCLDB)