Clarke Architectural Chrome Bathtubs

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 105 g,
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor and Air on/off switch
• Hidden air induction valves
• Safety suction
• 7 fully adjustable hydro jets & 1 massage lower lumbarjet
• Minimum operating capacity: 85 gal.
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets and 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Mood light with single light and single on/off air switch
• Optional pump modification relocate pump to opposite side
• Ozonator

Heating padNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

The unique configuration features three contoured seating positions. Tandem jets deliver hydrotherapy to both the neck/shoulder area as well as the lumbar/lower back.

• Corner
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 80 ga|_
• Center/side drain
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor & Air on/off switch
• Hidden air induction valves
• Safety suction
• 6 fully adjustable hydro jets & 2 massage lower lumbarjet
• Minimum operating capacity: 72 gal
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 10 fully adjustable funnel jets & 2 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome iet trim
• Optional pump modification relocate pump to opposite side

OzonatorNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

The historic shape of the Victoria makes it a wonderful place to while away the time. Its classic design guarantees that you can't go wrong. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and YourSpa"" baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 40 ga|
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor with Air on/off switch
• Safety suction & Hidden air induction valves
• 7 fully adjustable hydro jets & 1 message lower lumbar jet
• Minimum operating water capacity: 32 ga|
• Air Massage (A): 1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator
• Heating Pad with electric on/off controlNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Fashionable, functional and comfortable, nothing expresses elegance and beauty like Vida. The scale and proportions are perfect for any alcove or corner installation, where space is at a premium. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 80 Ga|_
• Center/side drain
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor & Air on/off switch
• Hidden air induction valves
• Safety suction
• 6 fully adjustable hydro jets & 2 massage lower lumbarjet
• Minimum operating capacity: 72 (;a|_
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 10 fully adjustable funnel jets & 2 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with iets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Mood light with single light and single on/off air switch
• Ozonator

Heating padNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

The intriguing beauty of the Milagro is perfect for today's more eclectic blend of old and new, timely and traditional. The Milagro is suitable for two bathers & features dual head rests for additional comfort. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Air

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and YourSpa"" baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 48 gal.
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor with Air on/off switch
• Safety suction & Hidden air induction valves
• 7 fully adjustable hydro jets & 1 message lower lumbar jet
• Minimum operating water capacity: 40 gt
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator
• Heating Pad with electric on/off controlNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

The name lives up to the reputation. Hallmark is truly a classic bath and one of the most sought after bathing styles. It is the perfect style, size and configuration to replace most existing bathtubs. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Rectangle
• Whirlpool

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and YourSpa"" baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 43 ga|_
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor with Air on/off switch
• Safety suction & Hidden air induction valves
• 7 fully adjustable hydro jets & 1 message lower lumbar jet
• Minimum operating water capacity: 40 ga|_
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator
• Heating Pad with electric on/off controlNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Softly sculpted armrests accentuate this spacious and versatile bath. Sculptura's oval shape of the bathing well is well proportioned in the rectangular space. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Rectangle
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and YourSpa'"' baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 55 gal.
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor with Air on/off switch
• Safety suction & Hidden air induction valves
• 7 fully adjustable hydro jets & 1 message lower lumbar jet
• Minimum operating water capacity:47 gal.
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator
• Heating Pad with electric on/off controlNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Alexandria is a simple yet sumptuous bath that takes advantage of every bit of available space. The softly sloping back incorporates sculpted armrests for maximum comfort. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Rectangle
• Whirlpool

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 82 ga|_
• Hydrotherapy (W):7.5 Amp/1.4HP pump/motor and Air on/off switch
• Hidden air induction valves & Safety suction
• 7 fully adjustable hydro jets & 1 massage lower lumbarjet
• Minimum operating capacity: 74 ga|_
• Air Massage(A):~ 1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpaT"" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Ozonator
• Heating pad with electronic control
• Field Installed Options:Curved skirt can be removed. if dron-in installation nreferredNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Striking and sophisticated in its simplicity, Odyssey makes a stunning statement with its curved shape, smooth edges, and clean lines. The sleek and spacious design provides a private spa for two. The front skirt comes standard. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Corner
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 60 gal.
• Center/side drain
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor & Air on/off switch
• Hidden air induction valves
• Safety suction
• 6 fully adjustable hydro jets
• Minimum operating capacity: 45 ga|_
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 10 fully adjustable funnel jets
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Mood light with single light and single on/off air switch
• Ozonator

Heating padNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

With its hourglass shape and graceful symmetry, Dara II is the perfect choice in an island setting or in any droop-in setting as well. Suitable for Two. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Rectangle
• Whirlpool

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 55 ga|_
• Center/side drain
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor & Air on/off switch
• Hidden air induction valves
• Safety suction
• 5 fully adjustable hydro jets
• Minimum operating capacity: 45 ga|_
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 10 fully adjustable funnel jets & 2 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Mood light with single light and single on/off air switch

OzonatorNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

With smooth contours combined with elegant lines, Elizabeth embody's a sense of serenity and harmony. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Air

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory.
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 57 ga|_
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor and air on/off switch
• Hidden air induction valves
• Safety suction
• 8 fully adjustable hydro jets
• Minimum operating capacity: 49 ga|_
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator

Heating pad with on/off controlNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Elegant and timeless beauty is reflected in the simple oval shape, the contoured walls, and the lightly rounded edges. Elisa's gently sculpted armrests encourage relaxation and lingering. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Air

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 40 gal.
• Center/side drain
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor & Air on/off switch
• Hidden air induction valves
• Safety suction
• 6 fully adjustable hydro jets
• Minimum operating capacity: 35 gal,
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cvcle
• 8 fully adjustable funnel jets 1
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Mood light with single light and single on/off air switch
• Ozonator

Heating padNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Soft concentric oval lines accentuate the simple beauty of this bath. Concentra features an effortless and timeless beauty that compliments any dcor. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory.
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T): Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 40 ga|
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor and air on/off switch
• Hidden air induction valves
• Safety suction
• 8 fully adjustable hydro jets
• Minimum operating capacity: 32 gal.
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator

Heating pad with on/off controlNotes:

• This product comes complete with installation, operating care and maintenance instructions.
• Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .
• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

The classic oval bathing well features gently contoured sides and a generous bathing area. The Original lays the perfect foundation for most any dcor. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Soaker

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and Total Massage baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 70 ga|_
• Center/side drain
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor & Air on/off switch
• Hidden air induction valves
• Safety suction
• 6 fully adjustable hydro jets & 2 massage lower lumbarjet
• Minimum operating capacity: 52 ga|_
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 10 fully adjustable funnel jets & 2 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights
• Mood light with single light and single on/off air switch
• Ozonator
• Heating pad
• Optional pump modification pump relocated to opposite side
• Flat design allows for under-mount installationNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Clean, minimal lines define the classic appearance of Oval 6. The extra-wide deck enables you to install faucets on the deck or on the platform. The Oval 6 can also be under mounted. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Air

Construction: Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and YourSpa'"' baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 55 gal.
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor with Air on/off switch
• Safety suction & Hidden air induction valves
• 7 fully adjustable hydro jets & 1 message lower lumbar jet
• Minimum operating water capacity:47 gal.
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator
• Heating Pad with electric on/off controlNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

• Rectangle
• Air

Construction:Clarke baths are constructed of the highest grade cast acrylic with fiberglass reinforced backing. Each tub features a pre-leveled base with supporting high density polyfoam blocks. The plumbing system on Clarke Hydrotherapy and YourSpa'"' baths utilizes a smooth flex pvc & clamp system that limits water entrapment in the lines.

• Every unit is performance tested with water prior to leaving the factory
• Certification:Meets or exceeds the following specifications: IAPMO & ETL
• Features:Basic (T):Available in White, Biscuit, Light Grey, Bone, or Black
• Textured slip resistant floor
• Pre leveled base
• Water capacity to overflow: 55 gal.
• Hydrotherapy (W):7.5 Amp/1.4 HP pump/motor with Air on/off switch
• Safety suction & Hidden air induction valves
• 7 fully adjustable hydro jets & 1 message lower lumbar jet
• Minimum operating water capacity:47 gal.
• Air Massage (A):1 HP blower with 200 W heating element
• Multi-Speed with 3 button control & 20 min delay purge cycle
• Escutcheons at each air channel hole for added sanitation.
• YourSpa" (WA):Hydrotherapy with 13Amp/2 HP pump
• 1 HP blower with 200 W heating element & purge cycle
• 11 fully adjustable funnel jets & 1 massage lower lumbar jet
• Factory installed in-line heater
• Standard
• 8 button digital control panel featuring variable speed, wave
• Action, digital temperature read out & single mood light
• Rejuvenation (RJ):13 Amp low flow pump with electric on/off control
• Single suction & single jet port
• Factory Installed Options:Factory installed in-line bath heater (works with jets only)
• Satin nickel or polished chrome jet trim
• Chromatherapy soothing light package with 3 L.E.D. lights and
• Control panel
• Mood light with single light and single on/off air switch
• Ozonator
• Heating Pad with electric on/off controlNotes:
• This product comes complete with installation, operating care and maintenance instructions.

Electrical specifications: 120V, 20 Amp , GFCI protected circuit for pump and/or blower Optional heater must be installed on its own dedicated 120V, 20 AMP, GFCI protected circuit .

• All dimensions and specifications are nominal and may vary +/- %. Use actual products for accuracy in critical situations.
• All Clarke baths feature a 2-Year limited warranty

Uniquely stunning, the Alma will transform your bath into a haven of comfortable elegance. Suitable for Two. Clarke Products Tubs are made of high gloss cast acrylic that is easy to take care of. Our tubs also feature a textured, slip-resistant surface in the bathing well and pre-leveled base, for easy installation. Drain & Overflow are not included.

• Oval
• Air