The Original Granite Bracket Countertop Support Brackets

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

This bracket is the perfect concealed countertop overhang bracket for countertop support. It is a nonintrusive support while giving your countertop the appearance of floating. Once installed this support bracket will be invisible and protect your countertop from cracking when leaned on. This bracket features countersunk holes to provide a flush installation for added support.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Heavy-Duty Contractor Grade Countertop Support Bracket.

This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

The bracket will be mounted over the top of the knee/pony wall. The knee wall bracket is sized in length tip to tip. Start by measuring from the outer edge of your countertop, including the 4 inches for the knee/pony wall. For example, a 12-inch countertop overhang, plus the 4-inch knee wall gives us 16 inches. Then subtract 3 inches. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4 inches. This measurement would be 13 inches (12 + 4 – 3 = 13), thus you would need to order a 12-inch Heavy-Duty Contractor Grade Countertop Support Bracket.

• Dimensions: of the Heavy-Duty Contractor Grade Countertop Support Bracket:
• Length – [Select your chosen length when ordering bracket]
• Width – 4 inches
• Thickness – 1/4 inch
• Countersunk Hole Diameter – 1/4 inch

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2-4) 2" #12 wood screws

• Our Wall Cleat Countertop Support Bracket has many uses to include
• Behind Sinks
• Behind Dishwashers
• Walls where the countertop runs into the walls

• We have 3 commonly used and convenient sizes for all applications
• Pre-drilled holes that are countersunk for quick and easy installation
• Double coated with a rust inhibitor black paint.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

Listing is for one bracket; hardware not included

The T-Bracket Hidden Granite Bracket is the bracket which will use the weight of the granite to support your big granite countertop overhang on an island. This Bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang. The vertical angle drops down on the inside back of the cabinets and is used to hold the T- Bracket in place until the granite is put in place. This will give your granite the appearance of floating once installed.

The T-Bracket has a 45 degree beveled edge on both the front and the back ends of the brackets for added safety. T-Brackets do not have mounting holes in the top of the bracket itself, the mounting holes are on the vertical tang. Brackets are actually sized in length tip to tip, therefore an 18 inch bracket is 18 inches tip to tip on the horizontal piece, and the vertical piece will be in the center of the horizontal piece.

The Hidden Granite Countertop Support T-Bracket is made of 1/2 inch thick by 2 1/2 inch wide American steel on the horizontal pierce. The vertical piece is 1/4 inch X 2-1/2 inch by 4 inch in length. Please Note: The vertical piece [tang] is placed in the center of the horizontal piece. Therefore, if you have a 10 inch bracket the vertical piece [tang] is directly in the center of the bracket, giving you 5 inches on each side of the T-Bracket. Meaning there will be 5 inches inside the cabinet and 5 inches on your overhang.

Our Granite Brackets are protected with a premium anti-rust black paint.

To Determine Length:

Example: 12 inch overhang, minus 3 inch setback from outer edge, equals 9 inches, plus 9 inches for inside cabinet, equals 18" T-Bracket. The vertical piece will be placed in the center. [Note, if the back wall of the cabinet is thicker, you may need to add extra inches for the thickness]. Please Note: The vertical piece [tang] is placed in the center of the horizontal piece. Therefore, if you have a 10 inch bracket the vertical piece [tang] is directly in the center of the bracket, giving you 5 inches on each side of the T-Bracket. Meaning there will be 5 inches inside the cabinet and 5 inches on your overhang.

• How many brackets will you need?
• We recommend spacing your brackets 20 inches apart for maximum granite protection; however, you can go up to 22 inches apart.

• The Hidden T-Brackets dimensions are as follows for horizontal piece:
• Length: see listing
• Width: 2 1/2 inches
• Thickness: 1/2 inch
• Hole Diameter: 1/4 inch

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• No corbels needed so you do not knock your knees
• Easy to install
• Made of 1/2 inch thick by 2 1/2 inch wide American steel
• Bracket end has beveled edge for safety.
• Screw holes are staggered on the vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws
For supporting a kitchen countertop where the countertop is balanced in the middle of the knee wall or pony wall, the Flat Wall Hidden Countertop Support Bracket is the hidden steel bracket support of choice. The perfect concealed bracket for countertop overhang.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(8) 2" #12 wood screws

This aluminum countertop support is mounted over a knee/pony wall, then into each stud on the knee/pony wall, to secure the weight of the countertop. If there is no knee/pony wall, a 2x6 must be mounted inside the cabinet and the L bracket attached spacing every 16-20".
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum L Bracket Countertop Support.

Our Dishwasher Support Bracket is a great way to secure your dishwasher from falling forward while providing additional support value to the front edge of your countertop.
After installing the bracket across the top of the dishwasher simply run a couple of self-tapping metal screws from the mounting tab on your dishwasher to the newly installed bracket.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

This bracket is the perfect concealed countertop overhang bracket for countertop support. It is a nonintrusive support while giving your countertop the appearance of floating. Once installed this support bracket will be invisible and protect your countertop from cracking when leaned on. This bracket features countersunk holes to provide a flush installation for added support.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Contractor Grade Countertop Support Bracket.

This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

The bracket will be mounted over the top of the knee/pony wall. The knee wall bracket is sized in length tip to tip. Start by measuring from the outer edge of your countertop, including the 4 inches for the knee/pony wall. For example, a 12-inch countertop overhang, plus the 4-inch knee wall gives us 16 inches. Then subtract 3 inches. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4 inches. This measurement would be 13 inches (12 + 4 – 3 = 13), thus you would need to order a 12-inch Contractor Grade Countertop Support Bracket.

• Dimensions of the Contractor Grade Countertop Support Bracket:
• Length – [Select your chosen length when ordering bracket]
• Width – 3 inches
• Thickness – 1/4 inch
• Countersunk Hole Diameter – 1/4 inch

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws
For supporting a kitchen countertop where the countertop is balanced in the middle of the knee wall or pony wall, the Flat Wall Hidden Countertop Support Bracket is the hidden steel bracket support of choice. The perfect concealed bracket for countertop overhang.

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws
For supporting a kitchen countertop where the countertop is balanced in the middle of the knee wall or pony wall, the Flat Wall Hidden Countertop Support Bracket is the hidden steel bracket support of choice. The perfect concealed bracket for countertop overhang.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with the Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

How to determine what size bracket:

• The bracket will be mounted to the inside of the cabinet. Start by measuring your cabinet from the inside front wall, where the doors are, to the opposite side of the cabinet. For instance, 22 inches. Next take your measurement (22 inches) and add the inches of the overhang of the countertop (I.E 15 inches). Then subtract 3 inches. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4 inches. This measurement would be 34 inches (22 + 15 – 3 = 34), thus you would need to order a 34-inch Hidden Island Support Bracket.
• Dimensions of the Hidden Island Support Bracket:
• Length – [Select your chosen length when ordering bracket]
• Width – 2 1/2 inches (4 1/2 inches with the flange)
• Thickness – 1/2 inch

**Not for use in any other application than that listed.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For supporting a kitchen countertop where the weight of the counter is balanced in the middle of the knee/pony wall, the Flat Wall Countertop Support Bracket is the hidden bracket support of choice. This bracket features countersunk holes to provide a flush installation for added support. This is the perfect concealed bracket for countertop overhang.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Flat Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

• This bracket will be installed directly in the middle of your knee/pony wall to provide support to both sides of an overhang. The Flatt Wall Countertop Support Bracket is sized in length tip to tip. Start by measuring the entire length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Flat Wall Countertop Support Brackets.
• If you are looking for holes placed on the end of the bracket, our Knee Wall Countertop Support Bracket may be what you are looking for.
• Dimensions of the Flat Wall Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with theIndustrial Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with the Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

How to determine what size bracket:

• The bracket will be mounted to the inside of the cabinet. Start by measuring your cabinet from the inside front wall, where the doors are, to the opposite side of the cabinet. For instance, 22". Next take your measurement (22") and add the" of the overhang of the countertop (I.E 15"). Then subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This measurement would be 34" (22 + 15 - 3 = 34), thus you would need to order a 34" Hidden Island Support Bracket.
• Dimensions of the Hidden Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5" (4 0.50" with the flange)
• Thickness - 0.50"

**Not for use in any other application than that listed.

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(8) 2" #12 wood screws

This countertop support is mounted over a knee/pony wall, then into each stud on the knee/pony wall, to secure the weight of the countertop. If there is no knee/pony wall, a 2x6 must be mounted inside the cabinet and the L bracket attached spacing every 16-20 inches.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the L Bracket Countertop Support.
This bracket is designed to attach to a knee/pony wall or inside a cabinet.

How to determine what size bracket:

• The bracket will be mounted over a knee/pony wall or inside cabinets. Start by measuring from the outer edge of your countertop, including the 4 inches for the knee/pony wall. For example, a 12-inch countertop overhang, plus the 4-inch knee wall gives us 16 inches. Then subtract 3 inches. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4 inches. This measurement would be 13 inches (12 + 4 -3 = 13), thus you would need to order a 13-inch L Countertop Support Bracket. Do not include the 6-inch vertical piece when determining the size to order.
• Dimensions of the L Bracket Countertop Support Bracket:
• Length – [Select your chosen length when ordering bracket]
• Width – 2 1/2 inches
• Thickness – 1/2 inch

**Not for use in any other application than that listed.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(8) 2" #12 wood screws

This aluminum countertop support is mounted over a knee/pony wall, then into each stud on the knee/pony wall, to secure the weight of the countertop. If there is no knee/pony wall, a 2x6 must be mounted inside the cabinet and the L bracket attached spacing every 16-20".
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum L Bracket Countertop Support.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

This bracket is the prefect concealed countertop overhang bracket for countertop support. It is a nonintrusive support while giving your countertop the appearance of floating. Once installed this support bracket will be invisible and protect your countertop from cracking when leaned on. This bracket features countersunk holes to provide a flush installation for added support.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum Knee Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

This bracket is the prefect concealed countertop overhang bracket for countertop support. It is a nonintrusive support while giving your countertop the appearance of floating. Once installed this support bracket will be invisible and protect your countertop from cracking when leaned on. This bracket features countersunk holes to provide a flush installation for added support.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum Knee Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

This bracket is the prefect concealed countertop overhang bracket for countertop support. It is a nonintrusive support while giving your countertop the appearance of floating. Once installed this support bracket will be invisible and protect your countertop from cracking when leaned on. This bracket features countersunk holes to provide a flush installation for added support.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum Knee Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

The Double-Sided Island Support Bracket is a hidden countertop support bracket designed to give support to any countertop which has an overhang on both sides of the cabinet. This bracket is primarily used for kitchen islands or breakfast bars. This is the perfect concealed countertop bracket for double overhang countertops. We recommend spacing your brackets every 16 to 20 inches apart.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Double-Sided Island Support Bracket.
There is no hardware needed for this bracket; it will rest inside of the pocket created to hold the bracket in place.

How to determine what size bracket:

This bracket will be installed over the top of your cabinets on the kitchen island or breakfast bar. Start by measuring the total length of your countertop. For example, you have a countertop of 28 inches. Subtract 3 inches from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4 inches. This gives us a total length of 22 inches (28 – 3 – 3 = 22), thus you would need to order 22 inch Double-Sided Island Support Brackets.

• Dimensions of the Double-Sided Island Support Bracket:
• Length – [Select your chosen length when ordering bracket]
• Width – 2 ½ inches
• Thickness – ½ inch

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"