Ring Pull Brass Cabinet and Drawer Hardware

This Genuine Solid Brass Flush Ring Pull from idh by St. Simons is the perfect choice for marine settings or wherever space is limited. Use it on hatch type doors such as under floor storage where flush installation is essential. its sturdy Solid Brass construction ensures reliability and durability.

Features: Mount only, pairs with a variety of rings to give pulls a personal touch (Ring sold separately) Select option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching Ring SKUS A2660-15 : 1.5" Round Ring A2660-2 : 2" Round Ring A2660-25 : 2.5" Round Ring A2670-15 : 1.5" Square Ring A2670-2 : 2" Square Ring A2670-25 : 2.5" Square Ring Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 1/2'' Width: 1/2'' Projection: 3/4'' Base Length: 1/2'' Base Width: 1/2'' Material: Brass Product Variations: A2670 (This Model): 1/2 Inch Square Cabinet Ring Pull Mount - Less Ring A2671: 9/16 Inch Square Cabinet Ring Pull Mount - Less Ring

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 1-1/2'' Width: 1-1/2'' Projection: 1/4'' Material: Brass Product Variations: A2670-15 (This Model): 1-1/2 Inch Square Cabinet Ring Pull - Less Mount A2670-2: 2 Inch Square Cabinet Ring Pull - Less Mount A2670-25: 2-1/2 Inch Square Cabinet Pull Ring

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2661 : Large Round Cylinder Mount C2661 : Large Round Crystal Mount A2671 : Large Square Cube Mount C2671 : Large Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 3-1/2'' Width: 3-1/2'' Projection: 3/8'' Material: Brass Product Variations: A2661-3: 3 Inch Wide Round Cabinet Ring Pull - Less Mount A2661-35 (This Model): 3-1/2 Inch Wide Round Cabinet Ring Pull - Less Mount

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 1-1/2'' Width: 1-1/2'' Projection: 1/4'' Material: Brass Product Variations: A2660-15 (This Model): 1-1/2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-2: 2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-25: 2-1/2 Inch Wide Round Ring Cabinet Pull

This cabinet pull with a drop ring is one of our finest pieces of decor at a value price! Its detailed deign will be the perfect accent for your kitchen, bath, office or any cabinet or drawer in your home!

• Adds style and functionality to your cabinets and drawers.
• High density die-cast zinc construction.
• 3 color options - Antique brass, oil rubbed bronze & pewter.
• Mounting hardware included for ease of installation.
• USA/Woman Owned and Operated, Free & Fast Shipping.

Utopia Alley quality cabinet hardware is manufactured with die-cast zinc and hand finished to our highest standards. We take pride in our Italian designs with American engineering.

Size:

• 1.2" L x 0.6" D x 2" H

Features: Mount only, pairs with a variety of rings to give pulls a personal touch (Ring sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching Ring SKUS: A2661-3 : 3" Round Ring A2661-35 : 3.5" Round Ring A2671-3 : 3" Square Ring A2671-35 : 3.5" Square Ring Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 9/16'' Width: 9/16'' Projection: 7/8'' Base Diameter: 9/16'' Material: Brass Product Variations: A2660: 1/2 Inch Wide Round Cabinet Ring Pull Mount - Less Ring A2661 (This Model): 9/16 Inch Wide Round Cabinet Ring Pull Mount - Less Ring

Gado Gado hardware is made using traditional hand-casting methods that have been passed down from generation to generation by the craftsmen of Central Java. By adhering to these time-honored techniques we are able to offer products with a unique character and elegance that modern forged hardware simply cannot duplicate.

• Hand-made from high quality recycled brass
• Antique Brass finish
• Unlacquered

FRP175U3 Flush Ring Pull, 1-3/4" x 1-3/8", Bright Brass Finish

• Flush Ring Pull
• Constructed to optimize strength and durability
• Use when flush installation is essential
• Solid brass construction
• Limited Three-Year Mechanical and One-Year Finish Warranty
• Dimension: 1-3/4" x 1-3/8"

1-3/4" x 1-3/8"

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2'' Width: 2'' Projection: 1/4'' Material: Brass Product Variations: A2660-15: 1-1/2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-2 (This Model): 2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-25: 2-1/2 Inch Wide Round Ring Cabinet Pull

Gado Gado hardware is made using traditional hand-casting methods that have been passed down from generation to generation by the craftsmen of Central Java. By adhering to these time-honored techniques we are able to offer products with a unique character and elegance that modern forged hardware simply cannot duplicate.

• Hand-made from high quality recycled brass
• Antique Brass finish
• Unlacquered

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2'' Width: 2'' Projection: 1/4'' Material: Brass Product Variations: A2670-15: 1-1/2 Inch Square Cabinet Ring Pull - Less Mount A2670-2 (This Model): 2 Inch Square Cabinet Ring Pull - Less Mount A2670-25: 2-1/2 Inch Square Cabinet Pull Ring

FRP25U3 Flush Ring Pull, 2-1/2" x 1 7/8" , Bright Brass Finish

• Flush Ring Pull
• Constructed to optimize strength and durability
• Use when flush installation is essential
• Solid brass construction
• Limited Three-Year Mechanical and One-Year Finish Warranty
• Dimension: 2-1/2" x 1-7/8"

2-1/2" x 1-7/8"

Features: Mount only, pairs with a variety of rings to give pulls a personal touch (Ring sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching Ring SKUS A2660-15 : 1.5" Round Ring A2660-2 : 2" Round Ring A2660-25 : 2.5" Round Ring A2670-15 : 1.5" Square Ring A2670-2 : 2" Square Ring A2670-25 : 2.5" Square Ring Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 1/2'' Width: 1/2'' Projection: 3/4'' Base Length: 1/2'' Base Width: 1/2'' Material: Brass Product Variations: C2670 (This Model): 1/2 Inch Square Crystal Cabinet Ring Pull Mount - Less Ring C2671: 9/16 Inch Square Crystal Cabinet Ring Pull Mount - Less Ring

Laurey is todays top brand of Decorative and Functional Cabinet Hardware! Make your home sparkle with our Decorative Knobs and Pulls, or fix up your cabinets with our Functional Hardware! Cabinets feel better when Laurey's on them!

Add a touch of elegance to your cabinets or drawers with this 3/4" diameter lucite pull. It features a traditional classic brass ring and clear design. The Brass piece is Approximately 2 - 1/4 inches high.
*Please look at the second image to see the color being purchased

Length - 1 5/8", Width - 1 1/2", Projection - 9/16", Base Diameter - 1/2"

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2-1/2'' Width: 2-1/2'' Projection: 1/4'' Material: Brass Product Variations: A2660-15: 1-1/2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-2: 2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-25 (This Model): 2-1/2 Inch Wide Round Ring Cabinet Pull

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2'' Width: 2'' Projection: 1/4'' Material: Brass Product Variations: A2660-15: 1-1/2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-2 (This Model): 2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-25: 2-1/2 Inch Wide Round Ring Cabinet Pull

Features: Mount only, pairs with a variety of rings to give pulls a personal touch (Ring sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching Ring SKUS: A2661-3 : 3" Round Ring A2661-35 : 3.5" Round Ring A2671-3 : 3" Square Ring A2671-35 : 3.5" Square Ring Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 9/16'' Width: 9/16'' Projection: 7/8'' Base Length: 9/16'' Base Width: 9/16'' Material: Brass Product Variations: A2670: 1/2 Inch Square Cabinet Ring Pull Mount - Less Ring A2671 (This Model): 9/16 Inch Square Cabinet Ring Pull Mount - Less Ring

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 1-1/2'' Width: 1-1/2'' Projection: 1/4'' Material: Brass Product Variations: A2670-15 (This Model): 1-1/2 Inch Square Cabinet Ring Pull - Less Mount A2670-2: 2 Inch Square Cabinet Ring Pull - Less Mount A2670-25: 2-1/2 Inch Square Cabinet Pull Ring

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2661 : Large Round Cylinder Mount C2661 : Large Round Crystal Mount A2671 : Large Square Cube Mount C2671 : Large Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 3'' Width: 3'' Projection: 3/8'' Material: Brass Product Variations: A2671-3 (This Model): 3 Inch Square Cabinet Ring Pull - Less Mount A2671-35: 3-1/2 Inch Square Cabinet Ring Pull - Less Mount

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2-1/2'' Width: 2-1/2'' Projection: 1/4'' Material: Brass Product Variations: A2670-15: 1-1/2 Inch Square Cabinet Ring Pull - Less Mount A2670-2: 2 Inch Square Cabinet Ring Pull - Less Mount A2670-25 (This Model): 2-1/2 Inch Square Cabinet Pull Ring

Antique Style: Round kitchen cabinet knob is made of Zinc alloy with fine brass finish. Solid dresser knobs avoids the risk of broken, depression or deformation during use. The design will provide better user experience. This cabinet knobs make your cabinet look new and modern.
Quality Service: This cabinet handle gives you 90 days trial. If there is any quality problem with our products or you have no idea how to install, please contact us we will try our best to help you.
Measurement: Diameter: 1-1/10inch; Base Diameter: 3/4inch; Projection:1inch.
Widely Compatible: Cabinet handles set, suitable for different styles of cabinets, drawer, drawer, wardrobe, cupboard, furniture. Smooth and clear Aluminum alloy handles, great helper to pull out drawer soon and conveniently.
Package Include: Every knob is individually wrapped. We offer 1" and 1.57" screws that help you to fit different thickness of the furniture. Please contact us if you need other size of screws.

Features: Mount only, pairs with a variety of rings to give pulls a personal touch (Ring sold separately) Select at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching Ring SKUS: A2660-15 : 1.5" Round Ring Pull A2660-2 : 2" Round Ring Pull A2660-25 : 2.5" Round RIng Pull A2670-15 : 1.5" Square Ring Pull A2670-2 : 2" Square Ring Pull A2670-25 : 2.5" Square Ring Pull Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 1/2'' Width: 1/2'' Projection: 3/4'' Base Diameter: 1/2'' Material: Brass Product Variations: C2660 (This Model): 1/2 Inch Wide Round Crystal Cabinet Ring Pull Mount - Less Ring C2661: 9/16 Inch Wide Round Crystal Cabinet Ring Pull Mount - Less Ring

Top Knobs - Newton Ring Pull 1 1/2" - Dark Antique Brass

Gado Gado hardware is made using traditional hand-casting methods that have been passed down from generation to generation by the craftsmen of Central Java. By adhering to these time-honored techniques we are able to offer products with a unique character and elegance that modern forged hardware simply cannot duplicate.

• Hand-made from high quality recycled brass
• Antique Brass finish
• Unlacquered

Features: Mount only, pairs with a variety of rings to give pulls a personal touch (Ring sold separately) choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching Ring SKUS: A2661-3 : 3" Round Ring A2661-35 : 3.5" Round Ring A2671-3 : 3" Square Ring A2671-35 : 3.5" Square Ring Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 9/16'' Width: 9/16'' Projection: 7/8'' Base Diameter: 9/16'' Material: Brass Product Variations: C2660: 1/2 Inch Wide Round Crystal Cabinet Ring Pull Mount - Less Ring C2661 (This Model): 9/16 Inch Wide Round Crystal Cabinet Ring Pull Mount - Less Ring

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2'' Width: 2'' Projection: 1/4'' Material: Brass Product Variations: A2670-15: 1-1/2 Inch Square Cabinet Ring Pull - Less Mount A2670-2 (This Model): 2 Inch Square Cabinet Ring Pull - Less Mount A2670-25: 2-1/2 Inch Square Cabinet Pull Ring

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2'' Width: 2'' Projection: 1/4'' Material: Brass Product Variations: A2660-15: 1-1/2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-2 (This Model): 2 Inch Wide Round Cabinet Ring Pull - Less Mount A2660-25: 2-1/2 Inch Wide Round Ring Cabinet Pull

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2660 : Small Round Cylinder Mount C2660 : Small Round Crystal Mount A2670 : Small Square Cube Mount C2670 : Small Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 2'' Width: 2'' Projection: 1/4'' Material: Brass Product Variations: A2670-15: 1-1/2 Inch Square Cabinet Ring Pull - Less Mount A2670-2 (This Model): 2 Inch Square Cabinet Ring Pull - Less Mount A2670-25: 2-1/2 Inch Square Cabinet Pull Ring

2" Art Deco Bail Cabinet Pull (Drawer Handle). Packaged with one 8/32 x 1" screw and backplate. Finish: Antique Brushed Satin Brass

Features: Ring only, pairs with a variety of mounts to give pulls a personal touch (Mount sold separately) - choose option at checkout High quality finishes resist tarnish through daily use Hand crafted from brass with attention to fine detail Coordinates with other items in the Configurable Drop Pulls collection Covered under a limited lifetime warranty Unlacquered Brass Finish: This finish PB/NL is a ''living finish''. Over time, living finishes may develop a patina by use or rub-off, and coloration changes will occur in a natural process unhancing the color. Alno, INC is not responsible for coloration changes on ''Living'' finishes Matching MOUNT SKUS: A2661 : Large Round Cylinder Mount C2661 : Large Round Crystal Mount A2671 : Large Square Cube Mount C2671 : Large Square Crystal Mount Product Technologies: Solid Brass Construction: This product begins with raw bars of solid brass which are heated, and pounded into specially made dies--producing a stronger, more substantial product. The difference between lesser metals and heat forged brass is noticeable the minute you hold it in your hands. Solid brass is heavier, smoother, and naturally resists corrosion. Specifications: Length: 3-1/2'' Width: 3-1/2'' Projection: 3/8'' Material: Brass Product Variations: A2671-3: 3 Inch Square Cabinet Ring Pull - Less Mount A2671-35 (This Model): 3-1/2 Inch Square Cabinet Ring Pull - Less Mount

Gado Gado hardware is made using traditional hand-casting methods that have been passed down from generation to generation by the craftsmen of Central Java. By adhering to these time-honored techniques we are able to offer products with a unique character and elegance that modern forged hardware simply cannot duplicate.

• Hand-made from high quality recycled brass
• Antique Brass finish
• Unlacquered

This Genuine Solid Brass Flush Ring Pull from idh by St. Simons is the perfect choice for marine settings or wherever space is limited. Use it on hatch type doors such as under floor storage where flush installation is essential. its sturdy Solid Brass construction ensures reliability and durability.