Buck Snort Lodge Products and Sugatsune America, Inc. Cabinet and Drawer Hardware

• H-type (Heavy-duty series)
• For TOP-OPENING FLAP DOOR with piano, butt, or concealed hinges.
• Opens to 70 degrees.
• Holds the door in a fully-opened position.
• Used in pairs (left/right)
• 3.5x15 steel screws provided.
• Available in 3 weight ranges: Light Duty, Medium Duty, and Heavy Duty.

• Torque Calculation: Torque = Door Height x 1/2 x Door Weight
• K-Type (Light Duty): 140~200 kg-cm (121~173 lbs-inch) per pair

• H-Type (Heavy Duty): 250~300 kg-cm (216~260 lbs-inch) per pair
• This product may expose its users to certain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Also available in:

• Brown: (Search: ML-80/BRN)
• White: (Search: ML-80/WHT)

• Unique ultra thin magnetic catch design with
• Extra strong magnetic force
• ROHS compliant
• Great for use on cabinet doors.
• Only 3/16" thick with a magnetic force of 8.8lbs
• Easy install Screws and strick plate are included

• K-type (Light-duty series)
• For TOP-OPENING FLAP DOOR with piano, butt, or concealed hinges.
• Opens to 70 degrees.
• Holds the door in a fully-opened position.
• Used in pairs (left/right)
• 3.5x15 steel screws provided.
• Available in 3 weight ranges: Light Duty, Medium Duty, and Heavy Duty.

• Torque Calculation: Torque = Door Height x 1/2 x Door Weight
• K-Type (Light Duty): 140~200 kg-cm (121~173 lbs-inch) per pair

• H-Type (Heavy Duty): 250~300 kg-cm (216~260 lbs-inch) per pair
• This product may expose its users to certain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

• Strong 5.9 lbs magnetic force
• To avoid breakage, counterplate should not hit the magnet and screw heads should be flush with base plate.
• Material: Magnet - Neodymium
• Base/Yoke - Steel
• Finish: Nickel
• Thickness: 2mm (3/64")
• Maximum temperature: 176 F (80 C)
• Counterplate and mounting screws included

Note:

• Suitable for temperatures below 80 C (176 F).
• Counterplate should not hit magnet to avoid breakage.
• Screw heads should not protrude above the base plate
• Formerly known as: YN001P

• This lid stay is ideal for upward opening flaps, such as vanity lids and toy boxes.
• Opens to a 105 degree angle.

Torque moment formulas as follows:

• Use one support per 43 inch/lbs.
• Determine inch/lbs with this formula: (lid wt. X front to back size) divided by 2.

• Recommended door thickness 20 mm (25/32")
• Screws included