Contemporary Flooring with Underlayment Included

Perfect for:

• Making laminate and wood floors warm and comfortable.
• New construction or when remodeling.
• Heating or supplemental heating of rooms, basements or room additions.
• All types of laminate and wood floors.
• Can be installed under carpet and vinyl with a layer of MDF.

Benefits:

• Provides all the comfort and health advantages of radiant heating without noisy fans, drafts, blowing dust or allergens.
• Saves energy up to 40% compared to convective systems.
• Fast and easy-to-install. No cement required.

Installation:

• Combine multiple same-Voltage mats as needed to fit the heated area (up to 15 Amp load on one floor heating thermostat).
• Install Cerazorb synthetic cork underlayment (purchased separately).
• Roll out heating film, tape seams, cover with vapor barrier, connect lead wires to thermostat and standard household Voltage.
• Lay floor covering following manufacturer's instructions.
• If installing carpet or vinyl, cover heating film with MDF.

Features:

• 5/8" wide heating elements provide more even heat distribution than heating cables.
• Long lengths make it easy to heat large floors.
• Factory-attached lead wires connect to the thermostat and standard household Voltage.
• Intertek Listed (UL-compliant) for the U.S. and Canada.

Perfect for:

• Making laminate and wood floors warm and comfortable.
• New construction or when remodeling.
• Heating or supplemental heating of rooms, basements or room additions.
• All types of laminate and wood floors.
• Can be installed under carpet and vinyl with a layer of MDF.

Benefits:

• Provides all the comfort and health advantages of radiant heating without noisy fans, drafts, blowing dust or allergens.
• 3 in 1 system insulates, quiets and heats the floor.
• Saves energy up to 40% compared to convective systems.
• Fast and easy-to-install. No cement required.

Installation:

• Combine multiple same-Voltage mats as needed to fit the heated area (up to 15 Amp load on one floor heating thermostat).
• Simply roll out heated underlayment, tape seams, connect lead wires to thermostat and standard household Voltage. Fill-in unheated area with comparable underlayment.
• Lay floor covering following manufacturer's instructions.
• If installing carpet or vinyl, cover heated underlayment with MDF.

Features:

• Factory-spaced heating cable reduces installation time.
• Factory-attached, water-proof lead wires connect to the thermostat (purchased separately) and standard household Voltage.
• Upgraded underlayment replaces generic foam underlayments.
• Intertek Listed (UL-compliant) for the U.S. and Canada.