Mrdirect Kitchen Fixtures

3218C 16 Gauge Single Bowl Stainless Steel Kitchen Sink Ens. with Black SinkLinkby MR Direct Sinks and Faucets

This durable, single bowl undermount sink is part of our highly practical Fabricator Series. Made from 304-grade stainless steel and your choice of an 18-gauge or 16-gauge thickness, this sink can be mounted under a laminate countertop with the included SinkLink installation piece. Offered in white, black or gray, the SinkLink is perfectly shaped to conjoin the undermount sink and laminate countertop into a flushed and flawless finish. Constructed from thick durable plastic, SinkLink acts as a secure barrier that keeps the foundation of the laminate countertop dry. The overall dimensions of the sink are 32 1/4" x 18" x 9 1/4" and a 33" minimum cabinet size is required. This sink contains a 3 1/2" drain and is fully insulated with sound dampening pads. This ensemble includes one of our high-quality stainless steel grids custom-made to fit this basin, a cutting board and a basket strainer that offers a deep, perforated, metal basket, complete with handle.Read More

808-Beige Quartz Granite Sink with Strainerby MR Direct Sinks and Faucets(29)

$239

The MR Direct 808-Beige Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The 808-Beige is stain and scratch-resistant and can resist heat up to 550�. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 21 5/8" x 16 7/8" x 7 3/4" and a 24" minimum cabinet size is required. The sink contains a 3 1/2" offset drain and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. 1 strainer, designed to match the finish of this sink, is included. It not only provides a perfect complement to the sink, but will catch unwanted waste.Read More

Single Bowl 3/4" Radius Stainless Steel Sink, 18-Gauge, Sink Onlyby MR Direct Sinks and Faucets(7)

$157

Maximum interior sink space is provided in this rectangular, single-bowl design; a part of the 3/4" radius collection. The 2920S is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 28 1/8" x 17 7/8" x 9 3/8", it will require a minimum-width cabinet of 30". This listing does not include any accessories.Read More

Kitchen Sink, 18-Gauge, Sink Onlyby MR Direct Sinks and Faucets(43)

$187~~$210~~

The equal-sized bowls of this stainless steel workhorse allow plenty of room for any chore to be divided and handled with ease. Its three-quarter inch radius corners provide maximum interior space. This model is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 31" x 18" x 9", it will require a minimum-width cabinet of 33". It is cUPC certified. This listing does not include any accessories.Read More

MR Direct 413 Fireclay Double Bowl Farmhouse Kitchen Sink, Sink Onlyby MR Direct Sinks and Faucets(2)

$549

Initially created with the functionality of a farmhouse sink, the 413 Fireclay Double Offset Bowl Sink has a twist of extra convenience in the form of its second basin. This reversible sink offers a fluted design on one side and a smooth side on the other, and is sure to bring both fashion and function to your kitchen. Our fireclay sinks are fired at temperatures of over 2,000 degrees Fahrenheit to ensure a smooth body, a strong base, and an overall beautiful result. Fireclay is made with durability in mind, and it is incredibly heat, chip, crack, and stain resistant. The 413 Fireclay has overall dimensions of 33"x 18"x 10" (note that a single bowl fireclay is also available in this exact size). This listing does not include any accessories.Read More

Spring Spout Kitchen Faucet, Chromeby MR Direct Sinks and Faucets(159)

$168

The 766-C Spring Spout Faucet offers the appearance and functionality of a commercial-style design. Styled after models found in the kitchens of the finest restaurants, this faucet will give your kitchen an air of professionalism. With the touch of a button, its steady stream of water can be turned into a powerful spray to rinse or fill previously unwieldy cookware. The 766-C is available in either a brushed nickel or chrome finish.Read More

4-Hole Kitchen Faucet, Brushed Nickelby MR Direct Sinks and Faucets(39)

$128~~$153~~

The 710-BN Four-Hole Kitchen Faucet is available in a brushed nickel, oil-rubbed bronze, or chrome finish. It contains a 360 degree spout and includes a soap dispenser and side spray for easy cleaning. The dimensions for the 710-BN are 12 5/8" tall with a 9 7/8" spout reach and it is ADA approved. The faucet is pressure tested to ensure proper working conditions and is covered under a lifetime warranty. The 710-BN has so many great components that are sure to make your kitchen sink user-friendly.Read More

Stainless Steel Bar Sink, 18-Gauge, Ensembleby MR Direct Sinks and Faucets(2)

$169~~$267~~

Durable and functional, this beautiful, undermount, stainless steel sink is nearly square in shape, and provides adequate space for washing glassware and utensils at the bar. As well, with its sweeping curved corners, it can offer plenty of space to clean vegetables and foodstuffs as a prep sink in the kitchen. This model is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 16" x 17" x 8 1/8", it will require a minimum-width cabinet of 18". It is cUPC certified. This ensemble includes one of our custom-fitted, natural cutting boards made from the dense hardwood of the rubberwood tree. Naturally resistant to moisture and mold; it features a groove along its perimeter which channels away any runoff. Our basket strainer offers a deep, perforated, metal basket, complete with handle. It sits inside the main body and holds considerably more waste than standard models.Read More

Offset Double Bowl Stainless Steel Sink, 16-Gauge, Wide Right, Sink Onlyby MR Direct Sinks and Faucets(1)

$108~~$172~~

With two different-sized bowls, the large one on the right deeper than the small one on the left; the MR Direct 501R-16 stainless steel sink is ready for undermount installation. The D-shape of the larger bowl, and the forward alignment of both, allows for a faucet to be installed where the bowls meet. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 32 1/8" x 17 7/8" x 8 1/4", it will require a minimum-width cabinet of 33". It is cUPC certified. This listing does not include any accessories.Read More

Stainless Steel Bar Sink, 18-Gauge, Ensembleby MR Direct Sinks and Faucets(11)

$154

The size and curves of this undermount model make it the right choice when space is at a premium. As well as providing an adequate washing area for glassware and utensils at the bar, it can also offer just the right amount of space to clean vegetables and foodstuffs as a prep sink in the kitchen. This model is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 15" x 12 3/4" x 7 1/4", it will require a minimum-width cabinet of 15". It is cUPC certified. This ensemble includes one of our custom-fitted, natural cutting boards made from the dense hardwood of the rubberwood tree. Naturally resistant to moisture and mold; it features a groove along its perimeter which channels away any runoff. Our basket strainer offers a deep, perforated, metal basket, complete with handle. It sits inside the main body and holds considerably more waste than standard models.Read More

Stainless Steel Bar Sink, 16-Gauge, Sink Onlyby MR Direct Sinks and Faucets(11)

$118

This round, bar sink can be top or undermounted; and its durability and size makes it practical in locations beyond the entertainment area. In the kitchen, it acts as the ideal prep sink; or even the primary sink if space is limited. And if stainless steel fits the decor, it is a great option for the bath. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 18 1/4" x 18 1/4" x 7 1/4", it will require a minimum-width cabinet of 21". It is cUPC certified. This listing does not include any accessories.Read More

Stainless Steel Bar Sink, 18-Gauge, Sink Onlyby MR Direct Sinks and Faucets(11)

$93

Durable and functional, this beautiful, undermount, stainless steel sink is narrow but still features a front-to back length comparable to full-size models. It provides adequate washing area for glassware and utensils at the bar; or it can offer plenty of space to clean vegetables and foodstuffs as a prep sink in the kitchen. This model is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 15" x 18 1/2" x 7 1/4", it will require a minimum-width cabinet of 18". It is cUPC certified. This listing does not include any accessories.Read More

Stainless Steel Bar Sink, 16-Gauge, Ensembleby MR Direct Sinks and Faucets(2)

$179~~$202~~

Durable and functional, this beautiful, undermount, stainless steel sink is nearly square in shape, and provides adequate space for washing glassware and utensils at the bar. As well, with its sweeping curved corners, it can offer plenty of space to clean vegetables and foodstuffs as a prep sink in the kitchen. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 16" x 17" x 8 1/8", it will require a minimum-width cabinet of 18". It is cUPC certified. This ensemble includes one of our custom-fitted, natural cutting boards made from the dense hardwood of the rubberwood tree. Naturally resistant to moisture and mold; it features a groove along its perimeter which channels away any runoff. Our basket strainer offers a deep, perforated, metal basket, complete with handle. It sits inside the main body and holds considerably more waste than standard models.Read More

ADAT550S 18 Gauge Single Bowl Stainless Steel Kitchen Sink, Sink Onlyby MR Direct Sinks and Faucets

$127

This spacious, single bowl topmount stainless steel sink was designed to follow the Americans with Disabilities Act (ADA) guidelines, making it safe and easy to use for individuals with disabilities or limited mobility. Made from 304-grade and 18-gauge stainless steel, this sink is guaranteed to last for years. The brushed satin finish offers a distinct sheen while safeguarding against damage like scratches and scuffs. The overall dimensions of the sink are 33" x 22" x 5 3/4" with a 3 1/2" center drain. A 33" cabinet minimum size is required for installation. The sink is fully insulated and covered with sound-dampening pads to muffle any noise caused by running water or dishes. A cutout template and installation hardware are included. All MR Direct sinks are covered by a limited lifetime warranty.Read More

T812-White Quartz Granite Sink with Strainersby MR Direct Sinks and Faucets(1)

$321

The MR Direct T812-White Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The T812-White is stain and scratch-resistant and can resist heat up to 550�. Its low divide and deep bowls provide more functionality, especially with large pots and pans. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 33" x 22" x 10 3/4" and a 33" minimum cabinet size is required. The sink contains 3 1/2" offset drains and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. 2 strainers, designed to match the finish of this sink, are included. They not only provide a perfect complement to the sink, but they will catch unwanted waste.Read More

Single Handle Kitchen Faucet, Antique Bronzeby MR Direct Sinks and Faucets(21)

$148

The 712-ABR is constructed with a solid brass waterway. This means it is built with inherent durability. Pressure testing and a ceramic cartridge confirm its enduring performance. This is a single-handle kitchen faucet which offers thin, high-arched styling and a 360-degree, swiveling spout with an attached handle near its base. A matching base plate and soap dispenser can be added. It measures 2 1/8" x 8 3/4" x 13" and is completely free of lead. Certified by the cUPC; it is also ADA and NSF approved, and covered by our limited lifetime warranty. This listing does not include any accessories.Read More

Single Bowl 90 Degree Stainless Steel Utility Sink, Sink Onlyby MR Direct Sinks and Faucets(17)

$217

The perpendicular corners of this nearly square, stainless steel sink open up its interior space; and with its comfortable depth there is plenty of room for oversized cookware or complicated chores. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 20" x 19" x 10", it will require a minimum-width cabinet of 21". It is cUPC certified. This listing does not include any accessories.Read More

Single Bowl Stainless Steel Bar Sink, 18-Gauge, Sink Onlyby MR Direct Sinks and Faucets(9)

$113

The largest of its type in a square format, this bar sink is durable, functional and beautiful. Designed as an undermount stainless steel sink for the entertainment area; it provides enough workspace to be used in limited-space kitchens as a primary sink as well. This model is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 20" x 20" x 9 1/4", it will require a minimum-width cabinet of 21". It is cUPC certified. This listing does not include any accessories.Read More

MR Direct T1823 Topmount 3/4-Inch Radius Kitchen Sink, Grid, and Basket Strainerby MR Direct Sinks and Faucets(2)

$203~~$235~~

This attractive, topmount basin is not the largest single-bowl stainless steel design available; but with its 3/4" corner-radius and 9" depth, it provides plenty of usable sink space in restricted spaces. The T1823 is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 23" x 20" x 9", it will require a minimum-width cabinet of 24". It is cUPC certified. Our high-quality stainless steel grid is custom-made to fit this basin. It helps protect the surface from scratches and dents, and prevents water from contaminating food. Our basket strainer offers a deep, perforated, metal basket, complete with handle. It sits inside the main body and holds considerably more waste than standard models.Read More

Offset Double Bowl Stainless Steel Kitchen Sink, Wide Left, Ensembleby MR Direct Sinks and Faucets

$228~~$363~~

The two offset bowls of this undermount design are only slightly different in size with the larger, deeper basin on the left. All corners have a small radius which provides even more interior space. The forward alignment of both bowls allows adequate space for a faucet to be installed where the bowls meet. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 32" x 20 3/4" x 10", it will require a minimum-width cabinet of 33". It is cUPC certified. Our high-quality stainless steel grids are custom-made to fit each basin. They help protect the surface from scratches and dents, and prevent water from contaminating food. Their removable rubber feet raise them slightly above the bottom of the sink. Included is one standard strainer - a solid traditional choice with a shallow removable receptacle; and one basket strainer - a deep, perforated, handled, metal basket designed to hold considerably more waste.Read More

Undermount Single Bowl Stainless Steel Kitchen Sink, 18-Gauge, Ensembleby MR Direct Sinks and Faucets(8)

$223~~$367~~

Maximum interior sink space is provided in this expansive, rectangular, single-bowl option; the largest basin in the three-quarter corner-radius collection. This model is 304-grade, cold rolled steel, at the industry standard 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 31 1/4" x 18" x 9", it will require a minimum-width cabinet of 24". It is cUPC certified. Our basket strainer offers a deep, perforated, metal basket, complete with handle. It sits inside the main body and holds considerably more waste than standard models.Read More

805-Black Quartz Granite Sink with Strainerby MR Direct Sinks and Faucets(6)

$229

The MR Direct 805-Black Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The 805-Black is stain and scratch-resistant and can resist heat up to 550�. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 17 3/4" x 16 7/8" x 7 3/4" and a 18" minimum cabinet size is required. The sink contains a 3 1/2" offset drain and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. 1 strainer, designed to match the finish of this sink, is included. It not only provides a perfect complement to the sink, but will catch unwanted waste.Read More

848-Black Quartz Granite Sinkby MR Direct Sinks and Faucets(55)

$277

The MR Direct 848-Black Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The 848-Black is stain and scratch-resistant and can resist heat up to 550�. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 32 5/8" x 18 3/8" x 9 1/4" and a 33" minimum cabinet size is required. The sink contains a 3 1/2" offset drain and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. Accessories are not included.Read More

Spring Spout Kitchen Faucet, Antique Bronzeby MR Direct Sinks and Faucets(159)

$193

The 766-ABR is constructed with a solid brass waterway. This means it is built with inherent durability. Pressure testing and a ceramic cartridge confirm its enduring performance. This is a very tall, spring-spout, kitchen faucet with smart, commercial-like styling and the ability to swivel 360 degrees. The flexible spray head can be twisted in any direction and easily changed from a stream to a spray. A matching base plate and soap dispenser can be added. It measures 2 1/8" x 10 1/4" x 20 1/2" and is completely free of lead. Certified by the cUPC; it is also ADA and NSF approved, compliant with the Safe Drinking Water Act, and covered by our limited lifetime warranty. This listing does not include any accessories.Read More

Stainless Steel Single Bowl 3/4" Radius Sink, 14-Gauge, Sink Onlyby MR Direct Sinks and Faucets(27)

$167

This attractive, undermount basin is not the largest single-bowl stainless steel design available; but with its three-quarter inch corner-radius and nine-inch depth, it provides plenty of usable sink space in restricted spaces. This model is 304-grade, 14-gauge, cold-rolled steel. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 23" x 17 7/8" x 9", it will require a minimum-width cabinet of 24". It is cUPC certified. This listing does not include any accessories.Read More

T801-Black Quartz Granite Sinkby MR Direct Sinks and Faucets(6)

$277~~$327~~

The MR Direct T801-Black Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The T801-Black is stain and scratch-resistant and can resist heat up to 550�. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 33" x 22" x 9 1/2" and a 33" minimum cabinet size is required. The sink contains 3 1/2" offset drains and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. Accessories are not included.Read More

Equal Double Bowl Stainless Steel Sink, 16-Gauge, Ensembleby MR Direct Sinks and Faucets(1)

$225~~$371~~

Two equal-sized bowls, over seven inches in depth, are ready for undermount installation. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 29 1/4" x 18 1/2" x 7 1/4", it will require a minimum-width cabinet of 30". It is cUPC certified. This ensemble includes one of our custom-fitted, natural cutting boards made from the dense hardwood of the rubberwood tree. Naturally resistant to moisture and mold; it features a groove along its perimeter which channels away any runoff. Our high-quality stainless steel grids are custom-made to fit each basin. They help protect the surface from scratches and dents, and prevent water from contaminating food. Their removable rubber feet raise them slightly above the bottom of the sink. Included is one standard strainer - a solid traditional choice with a shallow removable receptacle; and one basket strainer - a deep, perforated, handled, metal basket designed to hold considerably more waste.Read More

Half Divide Double Bowl Stainless Steel Kitchen Sink, 16-Gauge, Sink Onlyby MR Direct Sinks and Faucets(3)

$186~~$236~~

Two equal-sized bowls, over eight inches in depth, are ready for undermount installation. What makes this design extra special is the low divide between the equally-sized bowls. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 32 1/2" x 18 1/8" x 8 1/4", it will require a minimum-width cabinet of 33". It is cUPC certified. This listing does not include any accessories.Read More

812-White Quartz Granite Sinkby MR Direct Sinks and Faucets(9)

$277

The MR Direct 812-White Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The 812-Whiteis stain and scratch-resistant and can resist heat up to 550�. Its low divide and deep bowls provide more functionality, especially with large pots and pans. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 33" x 19" x 10 3/4" and a 33" minimum cabinet size is required. The sink contains 3 1/2" offset drains and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. Accessories are not included.Read More

Small Single Bowl Copper Sink, Strainerby MR Direct Sinks and Faucets(1)

$489

The 905 sink from MR Direct is a classic example of superior craftsmanship. It makes an artistic statement in any kitchen by flaunting its hand-hammered texture. Besides being an undermount sink, the 905 has a number of distinctive features. It is constructed from 99% pure mined copper, and its appearance will change over time as oxidation slowly produces a surface coating known as a patina. This effect is usually a major incentive for purchasing a copper sink, therefore MR Direct does not use any lacquers or waxes which could temporarily impede its development. Sound-dampening pads on the underside of the sink keep noise to a minimum. Additionally, as the smallest single-bowl sink in the copper line, the 905 can be a perfect fit for the kitchen with limited space. In more spacious kitchens, it can function as a prep sink; or in the entertainment area, it can add a classic touch as a bar sink. With an overall measurement of 16 1/2" x 12 1/2" x 7", it will require a minimum-width cabinet of 18". One matching, pure copper strainer is included to prevent unwanted waste from falling into the plumbing below.Read More

Triple Bowl Stainless Steel Kitchen Sink, 16-Gauge, Ensembleby MR Direct Sinks and Faucets(15)

$333~~$422~~

An extremely busy kitchen requires an extremely functional sink. This undermount model features two equal-sized bowls of reasonable depth straddling a smaller, shallower prep basin. The center sink is aligned with the front of the other bowls, creating a void along the back for installation of the faucet. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to the underside. With an overall measurement of 42 3/4" x 20 3/4" x 8 1/2", it will require a minimum-width cabinet of 45". It is cUPC certified. Our high-quality stainless steel grids are custom-made to fit each basin. They help protect the surface from scratches and dents, and prevent water from contaminating food. Their removable rubber feet raise them slightly above the bottom of the sink. Included is two standard strainers - a solid traditional choice with a shallow removable receptacle; and one basket strainer - a deep, perforated, handled, metal basket designed to hold considerably more waste.Read More

T848-Black Quartz Granite Sink with Flangeby MR Direct Sinks and Faucets(6)

$299

The MR Direct T848-Black Quartz Granite sink is made from a material comprised of 80% Quartz and 20% Acrylic. The T848-Black is stain and scratch-resistant and can resist heat up to 550�. The smooth non-porous surface is easy to clean, leaving nowhere for bacteria to thrive. The overall dimensions of the sink are 33" x 21" x 9 1/4" and a 33" minimum cabinet size is required. The sink contains a 3 1/2" offset drain and is available in multiple colors. As always, our Quartz Granite sinks are covered under a limited lifetime warranty for as long as you own the sink. One matching flange, for use with a garbage disposal, is included in this kit.Read More

Single Bowl Stainless Steel Kitchen Sink, 16-Gauge, Sink Onlyby MR Direct Sinks and Faucets(3)

$187~~$213~~

Durable and functional, this undermount single bowl is rectangular in shape with sweeping rounded corners. This model is 304-grade, cold rolled steel, at a 16-gauge thickness; 25% thicker than the industry standard 18-gauge. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 31 1/2" x 18 3/4" x 10 1/8", it will require a minimum-width cabinet of 33". It is cUPC certified. This listing does not include any accessories.Read More

Offset Double Bowl Copper Apron Sink, Strainersby MR Direct Sinks and Faucets(25)

$913~~$1,185~~

The 911 sink from MR Direct is a classic example of superior craftsmanship. It makes an artistic statement in any kitchen by flaunting its hand-hammered texture. Besides being an apron, or farmhouse-style sink, the 911 has a number of distinctive features. It is constructed from 99% pure mined copper, and its appearance will change over time as oxidation slowly produces a surface coating known as a patina. This effect is usually a major incentive for purchasing a copper sink, therefore MR Direct does not use any lacquers or waxes which could temporarily impede its development. Sound-dampening pads on the underside of the sink keep noise to a minimum. Additionally, the front facade of the 911 exhibits a dramatic organic filigree pattern, and its dual-bowl format features a smaller, shallow basin to the right of its large one. Overall, the 911 measurement is 33 1/4" x 22 1/4" x 9 7/8", and will require a custom apron-style cabinet. Two matching, pure copper strainers are included to prevent unwanted waste from falling into the plumbing below.Read More

Builder Series Stainless Steel Kitchen Sinks, 18-Gauge, C Ensembleby MR Direct Sinks and Faucets(7)

$187

Featuring a single bowl which is large and deep; this rectangular undermount design can stand alone as a contemporary design statement, or match existing stainless steel appliances. This model is 304-grade, cold rolled steel, at a 18-gauge thickness. The surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time. Dense, sound-dampening pads and an insulation coating are applied to its underside. With an overall measurement of 32 1/4" x 18" x 9 1/4", it will require a minimum-width cabinet of 33". It is cUPC certified. This ensemble includes one of our custom-fitted, natural cutting boards made from the dense hardwood of the rubberwood tree. Naturally resistant to moisture and mold; it features a groove along its perimeter which channels away any runoff. Our high-quality stainless steel grid is custom-made to fit this basin. It helps protect the surface from scratches and dents, and prevents water from contaminating food. Its removable rubber feet raise it slightly above the bottom of the sink. Our basket strainer offers a deep, perforated, metal basket, complete with handle. It sits inside the main body and holds considerably more waste than standard models.Read More

Pull Out Spray Kitchen Faucet, Chromeby MR Direct Sinks and Faucets(5)

$123~~$139~~

The 765-C Single-Handle Pull-Out Kitchen Faucet features a multifunction spray head that can be controlled by the simple press of a button conveniently located on its side. Flaunting the longest spout in our line of pull-out faucets, the 765 also stretches to nearly six feet with its flexible metal hose. The single handle mimics the curve of the faucet producing an elegant double arch effect. Available in a chrome or brushed nickel finish.Read More