Railroadware Mediterranean Chandeliers

Vintage lighting for that rustic or modern interior with historic ties to the Railroad and early telecom industries. Insulator lights are regionally sourced and made in the USA meeting and all NEC Standards and can be tested & UL labeled if needed. UL Listing is available if required by inspection. The pendant comes ready to hang with instructions, hardware & bulb.

• Included ready to hang
• 3 - Insulator clear glass 3 5/8"W x 4" tall.
• 1 - Ceiling canopy 5 1/4" with steel & 2 1/2" dia. cast Iron ring
• 3- LED Bulb 6W, 120V bulb (dimming) – 500 Lumens or 60W equal, 300 degree, 2700K warm white, No UV no IR
• 1 - Adjustable black cords 5'
• 1 - Candelabra base socket set
• Mounting hardware includes metal ceiling canopy & cross bar with two screws and an adjustable cord grip.

Insulators are selected matched in pairs or sets and free of chips or cracks.

Custom chandelier using a rustic telegraph/telephone pole crossarm beam, 2 insulator lights, steel hardware, glass insulators, bridle chain & 1 ceiling canopy with hook. Most components have spent time on the rails.
This is a rugged, western and industrial artifact fixture ready to hang. The wire power cord is threaded up the bridle chain and into canopy hook to hang & connect to your junction box. The fixture comes with 2 LED 120V/6W 500 Lumen dimming bulbs. UL Listed for an additional cost. Additional information available on request.

• Chandelier Includes (ready to hang)
• 1- Wood telegraph/ telephone crossarm 3" x 4" x 32" natural weathered finish
• 2- Glass Insulators 3 5/8″ wide x 4″ tall (Clear Beaded )

1 - Ceiling canopy with cast iron ring & hook mount, hardware and instructions (wood & steel) Cord threads through the hook to connect to your junction box.

• 2- Steel mounting brackets & bolts supporting wood beam are made from steel crossarm.
• 1- 5′ long bridle chain distressed & lacquer finished. (adjustable).
• BULB TYPE 120V 6W 500 Lumen 2700 K warm LED Bulb dimming
• 60W Eq. downlight recessed in insulator. Replacements available at Home Depot
• FIXTURE SOCKET BASE
• Porcelain base socket
• Weight 20 Lbs Box 12 x 12 x 32

Custom chandelier using a telegraph/telephone pole crossarm comprised of a rustic wood beam 3″x 4″x 37″ long, 3 insulator lights, steel hardware, glass insulators, 2 chains & 2 ceiling canopies with hooks. Most components have spent time on the rails.
This is a rugged, western and industrial artifact fixture ready to hang. The wire power cord is threaded up the 2 chains and into canopy hook to hang & connect to your junction box. The fixture comes with 3 LED 120V/6W 500 Lumen dimming bulbs. UL Listed for an additional cost. Additional information available on request.

• Chandelier Includes (ready to hang)
• 1- Wood telegraph/ telephone crossarm 3 x 4 x 37″ natural weathered finish
• 3- Glass Insulators 3 5/8″ wide x 4″ tall (Clear Beaded shown)
• 2- Ceiling canopies with hook mounts, hardware and instructions. The cord threads through the hook to connect to your junction box.
• 2- Steel mounting brackets, shackles & bolts supporting wood beam are made from steel.
• 2- 5′ long chains distressed & lacquer finished. (adjustable) 5′ power cords threaded through chain links.
• BULB TYPE 120V 6W 500 Lumen 2700 K warm LED Bulb dimming
• 60W Eq. downlight recessed in insulator. Replacements available at Home Depot.
• Porcelain base socket
• Weight 20 Lbs Box 12 x 12 x 37

The Insulator Light Pendant Cluster (blue/green) The look is industrial and modern with historical references to power generation and early telecommunication industries. Insulator lights are regionally sourced and made in the USA meeting and all NEC Standards and can be tested & UL labeled if needed. UL Listing is available if required by inspection. The pendant comes ready to hang with instructions, hardware & bulb.

• Included ready to hang
• 3 - Insulator clear glass 3 5/8"W x 4" tall.
• 1 - Ceiling canopy 5 1/4" with steel & 2 1/2" dia. cast Iron ring
• 3- LED Bulb 6W, 120V bulb (dimming) – 500 Lumens or 60W equal, 300 degree, 2700K warm white, No UV no IR
• 1 - Adjustable black cord 5'
• 1 - Candelabra base

Mounting hardware includes metal ceiling canopy & cross bar with two screws and an adjustable cord grip.

Insulators are selected matched in pairs or sets and free of chips or cracks.

• The Suspended Insulator Light Wine Barrel Hoop Chandelier

This western styled chandelier combines several materials including brass, glass, steel and chain and shackle & chain. The light fixture includes 4 glass insulators, wine barrel hoop, chain & canopy and hardware.

• The light is dimmable and the 120V 3W 280 lumen LED bulb is easily changed. Other bulbs can be used.
• The chandelier is fully assembled and ready to hang. It includes canopy & hardware.
• Chain length needs to be coordinated to match ceiling height and customer mounting height needs.
• Insulators are mounted with a brass fittings and brass tubing to the wine barrel hoop.
• The insulators are easily removed to clean or relamp.

Chandelier includes:

• 4 - Suspended Insulator Lights mounted to wine barrel hoop.
• 4 - Insulators are mounted with a brass fitting and brass tubing to steel hoop
• 1 - Wine barrel hoop +- 24" diameter x 3" tall (rustic finish)
• 1 - 4 chains connecting hoop to ceiling canopy loops with shackle hardware.
• 1 - Ceiling canopy & hardware (heavy duty)
• 4 - LED Bulb 120V 3W 280 lumens (dimming)
• This is a custom RailroadWare chandelier made with 4 brass bracket & suspended Insulators. The suspended insulators are mounted wine barrel hoop (galvanized or rusted, (+- 2 foot diameter). with 4 copper tubes. There are 4 chain mounts or steel straps to a single ceiling canopy (as shown in photo).
• Depending on your ceiling height and fixture trim height, the chandelier can be chain hung (single chain) to a ceiling canopy. This chain can be exposed (standard) or the chain and wires can covered with a fabric cord cover supplied by the customer.

Custom chandelier loaded with western charm uses a utility pole crossarm beam 3″x 4″x 58″ long, 4 insulator light lanterns with rusted lacquered canopy 7" wide. The wood beam is weathered. Most components have spent time on or near the rails.

This industrial artifact fixture ready to hang. The wire power cord is threaded up the chain and into canopy hook to hang & connect to your junction box. The fixture comes with 4 LED 120V/6W 500 Lumen dimming bulbs. UL Listed for an additional cost.

2 wire power cords are threaded up both chains and into canopy hook to connect to your junction boxes. Wiring can connect to a single power junction box by owner or on request.

• Chandelier Includes (ready to hang)
• 1- Wood telegraph/ telephone crossarm 3 x 4 x 58 natural weathered finish (length varies)
• 4- Glass Insulators lantern pendants 3 5/8" wide x 4" tall
• 4- Trafficlight lens hood 8" wide (yellow)
• 2- Ceiling canopies with hook mounts, hardware and instructions (wood & steel) Cord threads through the hook to connect to your junction box.
• 2- Steel mounting brackets & bolts supporting wood beam
• 2- 5' long chains distressed & lacquer finished.
• 2- 5' power cords threaded through chain links.

• Bulb Type 120V 6W 500 Lumen 2700 K warm LED Bulb dimming or 60W Eq.
• Fixture Socket Base Porcelain candelabra base
• Weight 34 Lbs
• Box 12 x 12 x 60

This glass lighting cluster cluster will enhance your home, office or commercial location referencing the railroad and telecom industries. Modern tech meets old world industrial and western decor. Our latest concept in dramatic historical lighting; the wires literally pour out of the cast iron washer.
Insulators comes in a variety of colors, sizes and shapes. Some insulators are over a 100 years old.

• Ready to hang.
• 3 - Glass insulators 3 5/8" x 4" tall
• 1 - 4" x 5" tall runway light globe adds centerpiece. lamped with a spot light
• 1 - 5' Adjustable cord lengths 5'-0" (Ready to hang and adjust)
• 1 - 5" ceiling canopy with cast iron washer and bracket screws and hardware.
• 1 - Steel washer bollo with wood cobb is used to spread and lock lock the cords.
• 1 - Wood Cobb 2" Steel Ring Bollo for cord adjustment
• 4 - Candelabra base LED 120v/6W bulbs 500 Lumens, 2700K, dimming, recessed

Glass pin type Insulators are no longer made. Some insulators are over 100 years old. All insulators have slight variations, we sort to match colors to complete sets.

Vintage lighting for that rustic or modern interior with historic ties to the Railroad and early telecom industries. This Chandelier Cluster of 10 glass insulators is our latest concept in dramatic lighting using historic glass insulators or industrial artifacts wired and illuminated with high output LED bulbs.
10 wires literally pour out of the heavy duty ceiling canopy. The wires pass through an adjustable steel ring bollo to adjust the array. The cluster of insulators cascade down 5' and are arranged around a 8" steel ring hoop locked into the insulator groove. All fixture parts are adjustable in height & location.
Railroadware combines industrial artifacts with modern technology to craft a unique decorative fixture that has historical significance. This is not a reproduction. It is the real thing! All parts are sourced regionally. Some insulators are over a 100 years old.

• The Insulatorlight Chandelier Cluster is ready to hang & adjust.
• Glass Insulator - (10 Insulators) - 3 5/8" x 4" tall overall width of cluster 20"
• Cord - cord lengths 5'-0" (Adjustable Ht. Ready to hang and adjust around the steel ring)
• Heavy Duty Canopy - Steel, 5" ceiling canopy with cast iron washer & bracket screws & hardware for mounting to ceiling junction box.
• Bollo Hardware - 2" Steel RR Washer, is used for accent and adjustment of the cluster
• LED 6W Bulbs - LED 120/6W bulbs 500 Lumens, 2700K, recessed into fixture.
• Instructions & hardware included
• Weight 23 LBS
• Size Width of chandelier Cluster 20" , Cord 5' long.

This is a custom chandelier using a telegraph/telephone pole crossarm 3"x4"x42" long. This is comprised of a rustic wood beam, steel hardware, glass insulators and 2 wood Insulator cobb ceiling hook canopies. All have spent time on the rails. This is a rugged, western and industrial fixture ready to hang. This industrial & western artifact is not a replica!

Aged beam is original & restored. Finishes and wood grain may vary.

power cords are threaded up both chains and into canopy hook to connect to your junction box.

Chandelier Includes (ready to hang):

• 1- Wood telegraph/ telephone crossarm 3 x 4 x 42 natural weathered finish
• 4- Glass Insulators 3 5/8" wide x 4" tall (Clear Beaded shown)
• 2- Insulator cobb canopy ceiling hook mounts with hardware and instructions (wood & steel) Cord threads through the hook to connect to your junction box.
• 2- Steel mounting brackets & bolts supporting wood beam are made from steel crossarm brackets 1 1/4" wide.
• 2- 5' long chains distressed & lacquer finished.
• 2- 8' power cords threaded through chain links.
• Included Bulb: LED 120v 6w 500 lumen, dimming

• Bulb Type 120V 6W 500 Lumen 2700 K warm LED Bulb dimming
• 60W Eq. downlight recessed in insulator.

• Fixture Socket Base Porcelain candelabra base
• Weight 30 Lbs