FREE shipping on orders over $49!* Details
- All Products
- Bath
- Tile
- Mosaic Tile
- Material: Porcelain
Porcelain Mosaic Backsplash / Wall Tile
Item 1 of 17
Sort by:
Price
272 Results
Best Seller
Growing Blue 11.50 x 11.50by Fancy Decorative Mosaic(1)
$33
Free Shipping
- Porcelain Mosaic Growing Blue, 11.5 x 11.5 Roman
- Growing Blue - Heart Shaped MultiBlue & Beige Porcelain & brown Handmade Mosaic
- Type: Porcelain Mosaic
- Square-Feet Per Sheet: 0.9184 sqft
- Size of Unit: 11.5 x 11.5
- Width: 11.5 Depth: 11.5 Thickness: 1/4 inch
- Sold By: Sheet
Spiral Matte White w/ Glossy White Dot Porcelain Floor and Wall Tileby Merola Tile(16)
$16.91/sq ft.
Offering a mosaic look, our Spiral Matte White with Glossy White Dot Porcelain Floor and Wall Tile features a smooth, mixed finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious, frost-resistant features, this mosaic is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Spiral Collection. Tile is the better choice for your space!
- 11.3 square feet, 10 pieces per case. Case weight is 21.7 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 12.63 in. width x 12.63 in. length x 0.22 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a mixed finish and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
Hulu Blue Band 11 x 11.5by Fancy Decorative Mosaic
$23
Free Shipping
Sponsored- Hulu Blue Band 11 x 11.5 - Stacked linear mosaic made of blue porcelain.
- Suggested Grout Color: Bostik Trucolor White H152
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla 3.5"x0.5" Mini KitKat Matte Whiteby The Mosaic Factory(42)
$14.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Matte
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Sheet Sevilla KitKat Fingers 6"x1" Glossy Ocean Greenby The Mosaic Factory(28)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Ocean Green
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Growing Blue 11.50 x 11.50by Pearl Drop Ineriors Design(6)
$35.87/sq ft.
Free Shipping
Sponsored- Growing Blue Growing Blue 11.5 X 11.5 Modern Mosaic
- 0.92 SqFt Each
- 18 Pieces Per Box
- 16.56 SqFt Per Box
- Product Sold By The Piece
- Growing Blue - Heart Shaped MultiBlue & Beige Porcelain & brown Handmade Mosaic.
- Suggested Grout Color: Bostik Trucolor Classic Bone H158
- Type: mosaic
- Size: 11.5" x 11.5"
- Pc/sf/box: 18pc / 16.56sf
- Size: 11.5" x 11.5" sqft/pc: 0.92sqft Width: 11.5 Depth: 11.5
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Greenby The Mosaic Factory(36)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Green with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Finger 6"x1" Glossy Light Grayby The Mosaic Factory(1)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Light gray with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla 6"x1" Maxi KitKat Matte Whiteby The Mosaic Factory(8)
$16.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Finish: Matte
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.96 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Glazed Porcelain Mosaic Sheet Sevilla 3.5"x0.5" Mini KitKat Glossy Light Greenby The Mosaic Factory(40)
$19.93/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Light Green
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Yellowby The Mosaic Factory(1)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Yelow with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
10.47"x12" Porcelain Mosaic Tile Sheet Paris Rhombus Glossy Whiteby The Mosaic Factory(18)
$15.42/sq ft.
Set of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 1.90"x 3.19"
- Sheet size (WxH): 10.47"x 12.00" (0.87 sq. ft.)
- Thickness: 5 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shade Variation
- PEI Rating
Growing Grass 11.5 x 11.5by Fancy Decorative Mosaic(1)
$32
Free Shipping
Sponsored- 11.5 x 11.5 Growing Grass Porcelain Mosaic
- Multi Green & Beige Pebble Shape Handmade Porcelain Mosaic
- Type: Porcelain Mosaic
- Square-Feet Per Sheet: 0.9184 sqft
- Size of Unit: 11.5 x 11.5
- Width: 11.5 Depth: 11.5 Thickness: 1/4 inch
- Sold By: Sheet
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Whiteby The Mosaic Factory(29)
$21.37/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Finger 6"x1" Glossy Terra Redby The Mosaic Factory(28)
$16.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Terra Red
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Finger 6"x1" Glossy Turquoiseby The Mosaic Factory(36)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Turquoise
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
90 Porcelain 1/2"x2" Chevron Mosaic, Shadowby Bedrosians Tile and Stone(2)
$16.38/sq ft.
Inspired by Japanese ceramics, the 90 Collection is an elegant Herringbone Mosaic that portrays 90-degree angles collectively throughout the panel. Offered in six luscious colors, the collection is offered in 2"x2" mosaic on a 11"x12" sheet that will surely make your space unique and sharp.
Number of Pieces Per Order: 10
Number of Pieces Per Order: 10
Growing Mango 11.50 x 11.50by Pearl Drop Ineriors Design(1)
$35.87/sq ft.
Free Shipping
- Growing Mango Growing Mango 11.5 X 11.5 Mosaic
- 0.92 SqFt Each
- 18 Pieces Per Box
- 16.56 SqFt Per Box
- Product Sold By The Piece
- Growing Mango 11.5x11.5 -Heart Shaped Porcelain Handmade Mosaic with white, beige, brown and blue pieces.
- Suggested Grout Color: Bostik Trucolor Classic Bone H158
- Type: mosaic
- Size: 11.5" x 11.5"
- Pc/sf/box: 18pc / 16.56sf
- Size: 11.5" x 11.5" sqft/pc: 0.92sqft Width: 11.5 Depth: 11.5
3/4" Penny Rounds Mosaic, 12"x12" Sheet, Lagoonby Bedrosians Tile and Stone(1)
$13.19/sq ft.
Inspired by Japanese ceramics, the 360 Collection is known for its smooth, circular surfaces. Available in Gloss and Matte Mosaics, each mosaic finish has its own unique, rustic, and refreshing colors that come in 3/4" penny round shapes on a 12"x12" sheet. Flexible for decorating almost anywhere, the 360 Collection is created to make your space stylish, soothing, and cool.
Number of Pieces Per Order: 10
Number of Pieces Per Order: 10
Growing Loft 11.50 x 11.50by Pearl Drop Ineriors Design
$28.26/sq ft.
Free Shipping
Sponsored- Growing Loft Growing Loft 11.5 X 11.5 Pearl Drop Ineriors Mosaic
- 0.92 SqFt Each
- 17 Pieces Per Box
- 15.61 SqFt Per Box
- Product Sold By The Piece
- Growing Loft - heart shaped white and grey porcelain mosaic.
- Suggested Grout Color: Bostik Trucolor White H152
- Type: mosaic
- Size: 11.5" x 11.5"
- Pc/sf/box: 17pc / 15.61sf
- Size: 11.5" x 11.5" sqft/pc: 0.92sqft Width: 11.5 Depth: 11.5
Hulu White Band 11 x 11.50by Pearl Drop Ineriors Design(1)
$26.14/sq ft.
Free Shipping
- Series White Hulu White Band 11 X 11.5 Mosaic
- 0.88 SqFt Each
- 20 Pieces Per Box
- 17.56 SqFt Per Box
- Product Sold By The Piece
- Hulu Series: White Band Porcelain White Linear Mosaic 11x11.5
- Suggested Grout Color: Bostik Trucolor White H152
- Type: mosaic
- Size: 11" x 11.5"
- Pc/sf/box: 20pc / 17.56sf
- Size: 11" x 11.5" sqft/pc: 0.88sqft Width: 11 Depth: 11.5
Growing Royal Blue 11.50 x 11.50by Fancy Decorative Mosaic
$32
Free Shipping
- Growing Royal Blue 11.5x11.5
- Suggested Grout Color: Bostik Trucolor White H152
Growing Grass 11.5 x 11.5by Pearl Drop Ineriors Design(2)
$35.87/sq ft.
Free Shipping
- Multi Green Growing Grass 11.5 X 11.5 Mosaic
- 0.92 SqFt Each
- 18 Pieces Per Box
- 16.56 SqFt Per Box
- Product Sold By The Piece
- Multi Green & Beige Pebble Shape Handmade Porcelain Mosaic.
- Suggested Grout Color: Bostik Trucolor Classic Bone H158
- Type: mosaic
- Size: 11.5" x 11.5"
- Pc/sf/box: 18pc / 16.56sf
- Size: 11.5" x 11.5" sqft/pc: 0.92sqft Width: 11.5 Depth: 11.5
Alloy Penny Round Stainless Steel Metal Wall Tileby Merola Tile(2)
$41.07/sq ft.
Constructed of metal, our Alloy Penny Round Stainless Steel Porcelain Mosaic Wall Tile is the perfect blend of modern materials in a timeless format. This tile features penny round stainless steel over porcelain chips that are arranged on interlocking mesh to create a seamless installation. With a smooth reflective surface, this wall tile emulates industrial glamour and adds depth and dimension to any space. Intended for interior wall use, it is the ideal choice for kitchen backsplashes, shower walls and fireplace facades. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 1.02 square feet per piece, each piece sold individually. Piece weight equals 2.05 lbs.
- Grade 1, first-quality metal/porcelain tile for wall use
- 11.63 in. width x 12.38 in. length x 0.3 in. thick mesh-mounted mosaic
- Unglazed, smooth finish with a medium sheen and uniform appearance in tone
- PEI Rating 0 is suitable for wall use only
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Imported
13"x24" Quiro Relieve Mosaic Porcelain Tiles, Set of 6, Blancoby Fanal
$18.06/sq ft.
Free Shipping
- Modern Look
- White Body
- 13X24
- Available In 2 Colors
- Available Plain
- Pei: Iii
- Shade Variation: 1
- Sqaure Feet Per Box: 12.75
- Pieces Per Box: 6
Dragon Scale Royal Blue 9.75 x 12by Fancy Decorative Mosaic
$28
Free Shipping
- 9.75 x 12 Dragon Scale Spring Porcelain Mosaic
- Dragon Scale Spring- White, beige, brown and blue porcelain mosaic in dragon scale shape.
- Type: Porcelain Mosaic
- Square-Feet Per Sheet: 0.833 sqft
- Size of Unit: 10x12
- Width: 9.75 Depth: 12 Thickness: 1/4 inch
- Sold By: Sheet
12.5"x9.75" Torre 3D Porcelain Mosaic Tile Sheet, Whiteby Tile Generation(2)Sponsored
$9.98/sq ft.
When you've hit a creative wall with your remodel, consider the walls themselves. The Torre tile sheet is the perfect tonic to your unfinished space, with a mosaic design that provides just the right amount of style, texture and interest. It's best suited for your kitchen backsplash or bathroom walls.
- 12.5" by 9.75" mosaic tile sheet
- Made up of 1.75" by 2.25" pieces
- Square footage per sheet: 0.85 sq. ft.
- 3D diamond design
- Finish: White
- Material: Porcelain
- Sheet dimensions: W 12.5" x D 9.75" x H 0.31"
11.8"x11.8" Glazed Porcelain Mosaic Barcelona 1" Square Glossy Olive Greenby The Mosaic Factory
$16.87/sq ft.
Free Shipping
Set of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
Shade Variation
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Olive Green
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 1"x 1"
- Sheet size (WxH): 11.8"x 11.8" (0.97 sq. ft.)
- Thickness: 5 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
Shade Variation
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
White Glossy Herringbone Porcelain Mosaic, 15 Sheetsby Buytilesandmore
$11.59/sq ft.
Free Shipping
Retro Herringbone Bianco porcelain tile offers a soft, neutral look that complements nearly any design scheme. It?s classic yet on-trend pattern and glossy finish create visual interest without overpowering its a perfect choice for updating kitchens and baths. A welcomed addition to both homes and light use commercial spaces, use it as wall tile, bathroom or kitchen backsplash tile, or on floors or countertops. Mix and match White Glossy Herringbone tile with other tiles from s Domino Collection for easy to achieve designer looks. These tiles are mounted on mesh-backed sheets for simplified installation and a professional finish. For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Grayby The Mosaic Factory
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Gray with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Almond Glossy Herringbone Porcelain Mosaic, 15 Sheetsby Buytilesandmore(2)
$15.67/sq ft.
Free Shipping
lmond Glossy Herringbone porcelain tile features a warm-toned neutral cream color that complements almost any design scheme. Its classic yet on-trend pattern and glossy finish create visual interest without overpowering perfect for updating kitchens and baths. A welcomed addition to both homes and light use commercial spaces, use it as wall tile, bathroom or kitchen backsplash tile, or on floors or countertops. Mix and match Almond Glossy Herringbone tile with other tiles from s Domino Collection for easy to achieve designer looks. These tiles are mounted on mesh-backed sheets for simplified installation and a professional finish.For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Glazed Porcelain Mosaic Tile Sheet Barcelona 2"x6" Matte Whiteby The Mosaic Factory(1)
$15.03/sq ft.
Free Shipping
Set of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Matte
- Individual tile size (WxH): 5.7"x 1.8"
- Sheet size (WxH): 11.4"x 11.7" (0.925 sq. ft.)
- Thickness: 6.5 mm
- Grout joint: 3 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Glazed Porcelain Mosaic Tile Sheet Sevilla 3.5"x0.5" KitKat Finger Glossy Whiteby The Mosaic Factory
$14.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Growing Olive 11.50 x 11.50by Fancy Decorative Mosaic
$31
Free Shipping
Sponsored- 11.5 x 11.5 Growing Olive Porcelain Mosaic
- Heart Shaped Porcelain Mosaic with Cream, Olive, Blue, and Dark Yellow Pebble-Like Colors
- Type: Porcelain Mosaic
- Square-Feet Per Sheet: 0.9184 sqft
- Size of Unit: 11.5x11.5
- Width: 11.5 Depth: 11.5 Thickness: 2/8 inch
- Sold By: Sheet
Glazed Porcelain Mosaic Sevilla 3.5"x0.5" Mini Kit Kat Fingers Glossy Soft Whiteby The Mosaic Factory
$19.72/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This glazed porcelain mosaic tile is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. The tiles can also be peeled off the mesh and installed individually, mixed with other colors. This tile can be installed in wet areas as well as dry areas. Please note that the images shown are actual photographs of the tiles, however, shade and size variations are inherent characteristics in all mosaic tile products. Product Specifications
This glazed porcelain mosaic tile is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. The tiles can also be peeled off the mesh and installed individually, mixed with other colors. This tile can be installed in wet areas as well as dry areas. Please note that the images shown are actual photographs of the tiles, however, shade and size variations are inherent characteristics in all mosaic tile products. Product Specifications
- Lot of 60 sheets covers 57 sq.ft.
- Color: Soft Retro White
- Material: Porcelain
- Finish: Glossy
- Surface shape: Convex
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 1 - Wall Use Only
- Samples
- It is highly recommended to order a sample.
- Samples are meant to give the touch/feel effect, color tones and surface finish etc. You may not be able to use it for your install
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
Glazed Porcelain Mosaic Tile Sevilla KitKat Finger 6"x1" Finger Glossy CafeLatteby The Mosaic Factory
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Cafe Latte (Cream)
- Material: Porcelain
- Finish: Glossy
- Surface shape: Concave
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 1 - Wall Use Only
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.