1. All Products
  2. Home Improvement
  3. Paint & Wall Coverings
  4. Primers

Primers

Kilz 2® Latex 20000 White Pigmented Primer Sealer/Stain Killer, 5 Gallon
Kilz 2® Latex 20000 White Pigmented Primer Sealer/Stain Killer, 5 Gallonby Masterchem Industries
$162
KILZ 2® LATEX is a fast drying, water-base, multi-purpose primer-sealer-stainblocker that can be topcoated with latex or oil-base paint. It has a very mild odor, which makes it an excellent choice for interior and exterior applications. Use on properly prepared interior and exterior surfaces, such as brick, painted metal, properly prepared glossy surfaces†, drywall, paneling, stucco, masonry, plaster and wood. *5 gallon *Fast dry water based white pigmented primer sealer/stain killer *Very low odor, may be used on interior or exterior surfaces *Holds back most stains *Can be re-coated quickly & allows for easy clean up with warm soapy water Surface Preparation: *The surface must be clean, free of dust, grease, wax, peeling paint and wallpaper paste. If washing is necessary use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry. *For maximum adhesion, scrape off loose paint and scuff sand the surface thoroughly before priming. On glossy surfaces: scuff sand the surface thoroughly before priming. *Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming. *Wash the area with a mildew remover, rinse with water and allow to dry before priming. *KILZ 2 may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2. *It is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ ORIGINAL or KILZ ODORLESS. Application: *Eye protection is recommended. *A small amount of water may be added for spray applications, but do not thin for stainblocking applications. *Stir thoroughly before and occasionally during use. *Apply using a brush, roller or sprayer. *Only apply if surface, air and product temperatures are between 50°-90°F. *Prime the entire surface to ensure a uniform appearance of the topcoat. *After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating. *Tinting is not recommended for stainblocking applications. KILZ 2 may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects. Tinting to a lighter shade than the topcoat is recommended. *Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces. Dry Time at 77°F (25°C), 50% RH: *Dries to the touch in 30 minutes. *Can be recoated or topcoated in one hour with latex or oil-based paint. *Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time. Clean up & Disposal: *Clean equipment and paint spatters with warm, soapy water. *Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.Read More
Kilz 2® Latex 20002 White Pigmented Primer Sealer/Stain Killer, 1-Quart
Kilz 2® Latex 20002 White Pigmented Primer Sealer/Stain Killer, 1-Quartby Masterchem Industries
$18
KILZ 2® LATEX is a fast drying, water-base, multi-purpose primer-sealer-stainblocker that can be topcoated with latex or oil-base paint. It has a very mild odor, which makes it an excellent choice for interior and exterior applications. Use on properly prepared interior and exterior surfaces, such as brick, painted metal, properly prepared glossy surfaces†, drywall, paneling, stucco, masonry, plaster and wood. *1 quart *Fast dry water based white pigmented primer sealer/stain killer *Very low odor, may be used on interior or exterior surfaces *Holds back most stains *Can be re-coated quickly & allows for easy clean up with warm soapy water Surface Preparation: *The surface must be clean, free of dust, grease, wax, peeling paint and wallpaper paste. If washing is necessary use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry. *For maximum adhesion, scrape off loose paint and scuff sand the surface thoroughly before priming. On glossy surfaces: scuff sand the surface thoroughly before priming. *Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming. *Wash the area with a mildew remover, rinse with water and allow to dry before priming. *KILZ 2 may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2. *It is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ ORIGINAL or KILZ ODORLESS. Application: *Eye protection is recommended. *A small amount of water may be added for spray applications, but do not thin for stainblocking applications. *Stir thoroughly before and occasionally during use. *Apply using a brush, roller or sprayer. *Only apply if surface, air and product temperatures are between 50°-90°F. *Prime the entire surface to ensure a uniform appearance of the topcoat. *After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating. *Tinting is not recommended for stainblocking applications. KILZ 2 may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects. Tinting to a lighter shade than the topcoat is recommended. *Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces. Dry Time at 77°F (25°C), 50% RH: *Dries to the touch in 30 minutes. *Can be recoated or topcoated in one hour with latex or oil-based paint. *Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time. Clean up & Disposal: *Clean equipment and paint spatters with warm, soapy water. *Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.Read More
Mad Dog Dura-Last Flexible Adhesive Primer, Mad Dog 2
Mad Dog Dura-Last Flexible Adhesive Primer, Mad Dog 2by Mad Dog
$59
Dura-Last: Flexible Adhesive Primer Dura-Last is the best exterior primer for everyday use on new and weathered projects. Use on all peeling paint surfaces. Dura-Last comes in a white base and helps projects last up to 20 years. For new, peeling or weathered surfaces. Dura-Last provides superior adhesion and beautiful hiding power. Ideal for the one coat of primer, single coat of top-coat job. Extends the life of top-coats for up to 20 years. Product Features Mad Dog Dura-Last helps paint last 2 to 4 times longer than traditional primers Dura-Last provides superior adhesion and beautiful hiding power Exceptional durability Provides a stable surface for longest lasting top-coat life. Expect up to 20 years Prevents paint from peeling Product Specifications 35% Solids/300 SF gal coverage 200% Flexibility/200 psi Adhesion Water-based, soap and water clean-up Super low VOC, eco-friendly formula MAD DOG PAINT PRODUCTS are made with WeatherSmart™ Adhesive Technology Permanently flexes and breathes, as the substrate expands and contracts with heat, humidity and cold weather Helps finish coats retain sheen and color 2 to 3 times longer than traditional primers Bonds like glue Permanently prevents peeling and cracking Locks down and stabilizes all worn and weathered surfaces Resists mold and mildew Promotes top coat adhesion for longest lasting paint durability Reduces prep & labor by 20% Cleans up with soap & water Eco Friendly formula Low odor, Super Low VOCRead More