- All Products
- Bath
- Tile
- Design: Metal Look
Novelty-Shaped Metal Look Tile
- Item: NDO-03
- Sheet size: 11-1/4 in. x 11-5/8 in. x 8 mm
- Coverage per sheet: 0.91 sqt
- Individual Tile size: 0.88 in. x 6.25 in.
- Material: White marble, Gold Stainless Steel
- Usage: Kitchen backsplash, bathroom backsplash, wall tile
- Sheet size: 9" x 10 3/4"
- Tile Size: 5 3/4" x 1 3/4"
- Tiles per sheet: 15
- Tile thickness: 1/4" nominal
- Grout Joints: 1/16"
- Coverage Per Sheet: 0.67 SQF
- Sheet Mount: Mesh Backed
Areas of application and technical data:
- Floors: Light Residential
- Showers: Yes
- Pools: No
- Direct Sunlight: Yes
- Heat Resistant: Yes
- Frost Resistant: Yes
- 12" by 9.75" mosaic tile sheet
- Square footage per sheet: 0.81 sq. ft.
- Handmade
- Bowling shaped tiles
- Finish: Brown
- Material: Ceramic
- Sheet dimensions: W 12" x D 9.75" x H 0.31"
- Tile Size: 11 1/2" x 6 7/8"
- Tile Thickness: 1/4" nominal
- Grout Joint: 1/16"
- Coverage Per Sheet: 0.55 SQF
- Single Listing
- Total SQ FT in 1 quantity: 0.55 SQF
Areas of application and technical data:
- Floors: Light Residential
- Showers: Yes
- Pools: No
- Direct Sunlight: Yes
- Heat Resistant: Yes
- Frost Resistant: Yes
Water-jet mosaic composed of Thassos marble and Mother-of-Pearl in a wave-like pattern.
** Price per Sheet **
- Technical –
- Material: Thassos marble and Mother-of-Pearl
- Sheet Size: 8 3/4" x 11"
- Thickness: 3/8"
- Sq Ft Per Piece: 0.67
- Colors: White Natural
- Uses: Residential, Commercial, Light Commercial, Interior Dry Walls
- Can install the residential shower when sealed.
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
- Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.
- Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
- Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
- Maintenance & Care –
- Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
- Tile Maintenance and More
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- 12" by 9.75" mosaic tile sheet
- Square footage per sheet: 0.81 sq. ft.
- Handmade
- Bowling shaped tiles
- Finish: White
- Material: Ceramic
- Sheet dimensions: W 12" x D 9.75" x H 0.31"
- Sheet size:10.7x12"
- Materials:Bianco Carrara
- Sold by:sheet
- Pcs or shts/box:5 sheets/boxSq.Ft/box:4.458
Recommend installations include: Wall, Floor, Backsplash, and Accents.
- Number of Pieces in 1 Quantity: 1
- Total SQ FT in 1 Quantity: 1
- Sheet size: 11 1/2" x 9 1/2"
- Flower Size: 4" x 4"
- Tile thickness: 1/4" nominal
- Grout Joints: variable
- Coverage Per Sheet: 0.76 SQF
- Sheet Mount: Mesh Backed
- Single Listing
- Total SQ FT in 1 quantity: 0.76 SQF
Areas of application and technical data:
- Floors: Light Residential
- Showers: Yes
- Pools: No
- Direct Sunlight: Yes
- Heat Resistant: Yes
- Frost Resistant: Yes
AS MARBLE IS A NATURAL STONE THERE IS VARIATION AND COLOR BETWEEN PRODUCTS. DUE TO DIFFERENT LIGHTING THE IMAGE SHOWN MAY VARY SLIGHTLY IN COLOR. IT IS RECOMMENDED TO ORDER A SAMPLE FIRST.
- Material: Marble
- Color: Light Blue With White
- Sheet Size: 11"x10"
- Coverage: 0.76 SF
- Sold By Sheet
- Finish: Polished
- Recommended Installation: Floor, Wall, Accent, Backsplash, Shower
- 1.00 sq ft/sheet - Sold in sets of 4
- Made in the USA
- Because these mosaics are made-to-order please allow for a two week production time.
- Number of Pieces in 1 Quantity: 1
- Total SQ FT in 1 Quantity: 0.96
- Silver Cube Offers A New Dimension In Glass Tile. Slim Profile Glass Works Well As Backsplash And Accent Panels On Wall Installation.
- Samples are just the representation of the original product and you will not be able to use it as a replacement of the actual tile.
- The sample size may vary from 4 to 6 inches, depending on the product line and availability. For a better understanding of the product, we will be able to provide you pictures of a specific tile.
- Also, any payment made towards a sample from us will be adjusted back in full (includes shipping of the sample) when you place the order with us of a minimum value of $75 which makes your sample FREE.
- We use UPS and USPS ground to ship your samples. You may receive a damaged sample however please note that the sample will still solve the purpose of representing the tones/texture/color. Your actual product will be shipped Insured and packed tight for its safety.
- Please note we allow 1 sample per
The Turning Point Glass Mosaic is a clean, elegant, unique, and versatile material. It can be utilized as backsplash, shower or tub surround, flooring, wall tile, ceiling tile, accent tile, or for borders. It is mesh-mounted.
Product Attributes
Item:
- Premium (SELECT) Quality 1" X 4" Italian Calacatta Gold Marble
- POLISHED HERRINGBONE MOSAIC TILE (ON-MESH)
Dimensions (per piece):
- 1" (Width) X 3 7/8" (Length) X 3/8" (Thickness)
Material:
- Premium Italian Calacatta Gold Marble
Coverage:
- Sheet Size: 11 1/8" X 12"
- 1 Sheet = 0.93 Sq. Ft.
Application Area(s):
- Commercial and Residential (Interior & Exterior), Shower, Backsplash, Deck & Patio, Decorative, Floor, Wall
Minimum Purchase:
- 10 sq. ft.
Surface Finish:
- Polished (Flawless, smooth satin finish)
Edge Finish:
- Straight cut/Rectified
- Sample
- SAMPLE SIZE = 6'' X 6''
- FREE SHIPPING APPLIES TO ALL ORDERS
- 1 SAMPLE ALLOWED PER HOUSEHOLD / ADDRESS
- MULTIPLE SAMPLES CAN ONLY BE PURCHASED BY DIRECTLY CONTACTING US
- Available Quantity
- All items are normally in stock in large quantities.
- Shipping is available within the 48 continental US States.
- SHIPPING IS FREE ON ALL ORDERS OF THIS ITEM, UNLESS STATED OTHERWISE.
- Special arrangements may be made for international buyers.
- For large orders and all other shipping related inquiries, please contact our shipping department.
- Ship / Lead Time
- All items are in stock. Normally ships within 1-2 Business days
- Item Location
- Southern California (Anaheim, CA)
- Local Pickup
- Available with appointment.
- Material Origin
- ITALY
- Manufacturer / Importer
- OTS
- Please keep in mind that each piece of natural stone has unique features that vary it from the others in terms of color, texture and homogeneity. Expect to have some variation between individual pieces when ordering in large quantities.
- Installation of the product requires sealing products and these need to be purchased seperately. (Only the item described in the listing will be shipped out).
Thassos Marble mixed with Blue Crystals in Circle Shape, squares and triangles to form a circular pattern.. This Mosaic comes in a Honed finish.
Price per Sheet (0.96 sq ft)
- Material: Marble
- Sheet Size: 11.5" x 12"
- Sq Ft Per Piece: 0.96
Approximate Piece Size:
- Thickness: 3/8 in (8.00 mm)
- Colors: Blue White
- Finish: Honed
- Backing: Polyurethane Cord
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Exterior Walls
- Installation Guide
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.75
- Thickness: 3/8"
- Colors: Cappuccino
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Constructed from aluminum for a beautiful mosaic tile that will last
- Designed to have the appearance of metal
- Made with a high (V3) shade variation which means each tile will be a very different shade
- Diamond shape
Installation:
- Approved for indoor use
- Approved for residential and commercial use
*** Price is per Sheet (0.84 sq ft) ***
- Material: Nero Marquina Marble and Stainless Steel 304
- Sheet Size: 10" x 12"
- Sq Ft Per Piece: 0.84 sq ft
Approximate Piece Size:
- Thickness: 1/4"
- Recommended Grout Joint: 3/32"
- Stone Characteristics: Clean stones with no geological imperfections or fissures. Filling or patching is not necessary for these stones.
- Color Variation: Background color contains small variations.
- Colors: Black Gold
- Finish: Polished
- Made in: Italy
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Our Collection presents a high degree of shade variance inherent in natural stone products. If consistent color is required, we recommend purchasing 25% more product to achieve the greatest uniformity possible. Should you require a uniform appearance, we suggest looking into porcelain mosaic alternatives
- Constructed from glass for a beautiful mosaic tile that will last
- Designed to have the appearance of porcelain
- Made with a medium (V2) shade variation which means each tile will be a slightly different shade
- Herringbone style
Installation:
- Approved for indoor use
- Approved for residential and commercial use
- Silver Cube Offers A New Dimension In Glass Tile. Slim Profile Glass Works Well As Backsplash And Accent Panels On Wall Installation.
- Samples are just the representation of the original product and you will not be able to use it as a replacement of the actual tile.
- The sample size may vary from 4 to 6 inches, depending on the product line and availability. For a better understanding of the product, we will be able to provide you pictures of a specific tile.
- Also, any payment made towards a sample from us will be adjusted back in full (includes shipping of the sample) when you place the order with us of a minimum value of $75 which makes your sample FREE.
- We use UPS and USPS ground to ship your samples. You may receive a damaged sample however please note that the sample will still solve the purpose of representing the tones/texture/color. Your actual product will be shipped Insured and packed tight for its safety.
- Please note we allow 1 sample per
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Green Gray
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 1.90"x 7.6"
- Sheet size (WxH): 10.1"x 12.30" (0.87 sq. ft.)
- Thickness: 6 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 1 - Wall Use Only
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
- Sheet size:11.7x11.9"
- Materials:glass
- Sold by:sheet
- Pcs or shts/box:10 sheets/boxSq.Ft/box:9.66
Calacatta marble Mixed with Bardiglio Marble, squares and triangles to form a circular pattern.. This Mosaic comes in a Polished finish.
Price per Sheet (0.96 sq ft)
- Material: Marble
- Sheet Size: 11.5" x 12"
- Sq Ft Per Piece: 0.96
Approximate Piece Size:
- Thickness: 3/8 in (8.00 mm)
- Colors: Grey White
- Finish: Polished
- Backing: Polyurethane Cord
- Sheet size:12x12"
- Materials:resin
- Sold by:sheet
- Pcs or shts/box:5 sheets/boxSq.Ft/box:5
*** Price is per Sheet (0.84 sq ft) ***
- Material: Tassos Marble and Stainless Steel 304
- Sheet Size: 10" x 12"
- Sq Ft Per Piece: 0.84 sq ft
Approximate Piece Size:
- Thickness: 1/4"
- Recommended Grout Joint: 3/32"
- Stone Characteristics: Clean stones with no geological imperfections or fissures. Filling or patching is not necessary for these stones.
- Color Variation: Background color contains small variations.
- Colors: White Gold
- Finish: Polished
- Made in: Italy
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Our Collection presents a high degree of shade variance inherent in natural stone products. If consistent color is required, we recommend purchasing 25% more product to achieve the greatest uniformity possible. Should you require a uniform appearance, we suggest looking into porcelain mosaic alternatives
- Sheet size:12.2x12.2"
- Materials:Thassos/Crema Marfil
- Sold by:sheet
- Pcs or shts/box:5 sheets/boxSq.Ft/box:5.168
- Sheet size:10.4x10.6
- Materials:Bianco Carrara/Bardiglio
- Sold by:sheet
- Pcs or shts/box:5 sheets/boxSq.Ft/box:3.827
Item:
- Premium (SELECT) Quality Italian Calacatta Gold Marble
- HONED LARGE CHEVRON MOSAIC TILE BLUE/GRAY MARBLE STRIPS (ON-MESH
Dimensions (per piece):
- 11-3/4" (Width) X 11" (Length) X 3/8" (Thickness)
Material:
- Premium Italian Calacatta Gold Marble
Coverage:
- 1 sheet = 0.9 sq. ft.
Application Area(s):
- Commercial and Residential (Interior & Exterior), Shower, Backsplash, Deck & Patio, Decorative, Floor, Wall
Minimum Purchase:
- 10 sq. ft.
Surface Finish:
- Honed (Flawless, smooth matte finish)
Edge Finish:
- Straight cut/Rectified
- SAMPLE SIZE = 6'' X 6''
- FREE SHIPPING APPLIES TO ALL ORDERS
- 1 SAMPLE ALLOWED PER HOUSEHOLD / ADDRESS
- MULTIPLE SAMPLES CAN ONLY BE PURCHASED BY DIRECTLY CONTACTING US
- All items are normally in stock in large quantities.
Shipping Details / Cost
- Shipping is available within the 48 continental US States.
- SHIPPING IS FREE ON ALL ORDERS OF THIS ITEM, UNLESS STATED OTHERWISE.
- Special arrangements may be made for international buyers.
- For large orders and all other shipping related inquiries, please contact our shipping department.
All items are in stock. Normally ships within 1-2 Business days
Item Location
Southern California (Anaheim, CA)
Local Pickup
Available with appointment.
Material Origin
ITALY
Manufacturer / Importer
OTS
- Please keep in mind that each piece of natural stone has unique features that vary it from the others in terms of color, texture and homogeneity. Expect to have some variation between individual pieces when ordering in large quantities.
- Installation of the product requires sealing products and these need to be purchased seperately. (Only the item described in the listing will be shipped out).
- Calacatta Gold Marble Honed Large Chevron Mosaic Tile w / Blue Gray Strips
- Product Attributes
Item:
- Premium Quality Italian Calacatta Gold Marble HONED LARGE CHEVRON MOSAIC TILE BLUE/GRAY MARBLE STRIPS (ON-MESH
Dimensions (per piece):
- (per sheet):11-3/4" (Width) X 11" (Length) X 3/8" (Thickness)
- (per chip): 1-1/4" (W) X 4" (L)
Material:
- Premium Italian Calacatta Gold Marble
Coverage:
- 1 sheet = 0.9 sq. ft. - Price per Sheet
Application Area(s):
- Commercial and Residential (Interior & Exterior), Shower, Backsplash, Deck & Patio, Decorative, Floor, Wall
Minimum Purchase:
- 10 sq. ft.
Surface Finish:
- Honed (Flawless, smooth matte finish)
Edge Finish:
- Straight cut
- Available Quantity
- All items are normally in stock in large quantities.
- Shipping Details / Cost
- Shipping is available within the 48 continental US States.
- SHIPPING IS FREE ON ALL ORDERS OF THIS ITEM, UNLESS STATED OTHERWISE.
- Special arrangements may be made for international buyers.
- For large orders and all other shipping related inquiries, please contact our shipping department.
- Ship / Lead Time
- All items are in stock. Normally ships within 1-2 Business days
- Item Location
- Southern California (Anaheim, CA)
- Local Pickup: Available with appointment.
- Material Origin: ITALY
- Manufacturer / Importer: OTS
- Please keep in mind that each piece of natural stone has unique features that vary it from the others in terms of color, texture and homogeneity. Expect to have some variation between individual pieces when ordering in large quantities.
- Installation of the product requires sealing products and these need to be purchased seperately. (Only the item described in the listing will be shipped out).
- Sheet size:12x12"
- Materials:resin
- Sold by:sheet
- Pcs or shts/box:5 sheets/boxSq.Ft/box:5