- All Products
- Bath
- Tile
- Features: Scratch-Resistant
Polished Scratch-Resistant Tile
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: Beige Lux
- Look: Marble
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - 145 mm3
- Application - Floor and Wall
- Breaking Strength, in N 2500 N
- Chemical Resistant - Resistant
- DCOF Acutest - >0.42
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - 7
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 5
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.05%
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: White Lux
- Look: Marble
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - 145 mm3
- Application - Floor and Wall
- Breaking Strength, in N 2500 N
- Chemical Resistant - Resistant
- DCOF Acutest - >0.42
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - 7
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 5
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.05%
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 4"x24"
- Edge: Rectified
- Colors: Light Beige
- Look: Onyx
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - 145 mm3
- Application - Floor and Wall
- Breaking Strength, in N 2500 N
- Chemical Resistant - Resistant
- DCOF Acutest - N/A
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - 7
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 5
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.05%
Product Sold By The Piece
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: Light Beige
- Look: Onyx
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - 145 mm3
- Application - Floor and Wall
- Breaking Strength, in N 2500 N
- Chemical Resistant - Resistant
- DCOF Acutest - >0.42
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - 7
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 5
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.05%
- 1.06 square feet per piece, each piece sold individually. Piece weight equals 2.2 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 12 in. width x 12.5 in. length x 0.25 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and moderate variation in tone
- PEI Rating I is suitable for light-duty residential floors, bathrooms and bedrooms without direct access from outside; no scratching dirt can be present
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Japan
- 1.02 square feet per piece, each piece sold individually. Piece weight equals 1.4 lbs.
- Grade 1, first-quality ceramic tile for floor and wall use
- 12 in. width x 12 in. length x 0.19 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating I is suitable for light-duty residential floors, bathrooms and bedrooms without direct access from outside; no scratching dirt can be present
- Semi-Vitreous tiles have water absorption of more than 3% but less than 7% for indoor use
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Japan
- 0.66 linear feet per piece. Each piece sold individually. Piece weight equals 0.35 lbs.
- Grade 1, first-quality ceramic tile for wall use
- 2 in. width x 7.88 in. length x 0.68 in. thick
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating 0 is suitable for wall use only
- Non-Vitreous tiles have water absorption of more than 7% for indoor use
- DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
Thickness:
- Colors: White Gold
- Finish: Matte finish
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- 0.66 linear feet per piece. Each piece sold individually. Piece weight equals 0.15 lbs.
- Grade 1, first-quality ceramic tile for wall use
- 1 in. width x 7.88 in. length x 0.38 in. thick
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating 0 is suitable for wall use only
- Non-Vitreous tiles have water absorption of more than 7% for indoor use
- DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
- 0.98 linear feet per piece. Each piece sold individually. Piece weight equals 0.2 lbs.
- Grade 1, first-quality ceramic tile for wall use
- 0.5 in. width x 11.75 in. length x 0.44 in. thick
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating 0 is suitable for wall use only
- Semi-Vitreous tiles have water absorption of more than 3% but less than 7% for indoor use
- DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Portugal
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
- Look: Marble
- Colors: White Gold
- Finish: Glossy finish
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
- Look: Onyx
- Colors: Beige
- Finish: Matte finish
- Edge: Rectified
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: White Gray
- Look: Marble
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - N/A
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 4
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08%
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: White
- Look: Marble
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - N/A
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 4
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08%
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: White Gold
- Look: Marble
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - N/A
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 4
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08%
*** Product Sold By The Piece ***
- Material: Porcelain
- Sheet Size: 3"x12"
- Edge: Rectified
- Colors: Snow White
- Look: Marble
- Finish: Polished
- Country of Origin: Italy
Technical Specification
- Abrasion Resistance - N/A
- DIN 51130 - N/A
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V2 (slight variation)
- Staining Resistance - >Class 4
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08%
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
- Look: Onyx
- Colors: Beige
- Finish: Glossy finish
- Edge: Rectified
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- 0.66 linear feet per piece. Each piece sold individually. Piece weight equals 0.2 lbs.
- Grade 1, first-quality ceramic tile for wall use
- 1 in. width x 7.88 in. length x 0.55 in. thick
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating 0 is suitable for wall use only
- Non-Vitreous tiles have water absorption of more than 7% for indoor use
- DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
- Look: Marble
- Colors: White
- Finish: Matte finish
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
- Look: Marble
- Colors: White
- Finish: Glossy finish
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish