Frosted Free-Form Tile

Tierra y Fuego Talavera Mexican ceramic tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind.
PLEASE NOTE: This product is sold by the pound, not by box, therefore we may consolidate orders into one box. Colors & variety of your broken tile order will vary upon availability. Some tiles may Not be broken. We sell them as material appropriate to break since they may have chipped corners or they may come from an odd batch. Colors and variety of broken tile will vary upon availability.

• Each tile is handmade by artisans. The tiles are glazed, decorated by hand, and fired in a kiln.
• Characteristics of Mexican Talavera Tile:
• 1) 1 square foot area requires approximately 3 pounds of broken tile.
• 2) Colors Y variety of your broken tile order will vary upon availability.
• 3) Measurements within a tile may vary by as much as 1/8 in.
• 4) Thickness: 1/4 in.
• 5) Tiles are slippery when wet if used on floors.

6) Industry standard recommends adding 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations.

• 7) Lot variation in size and color may be present.

8) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all handmade ceramic tiles.

• 9) Talavera tiles are NOT frost proof.

SUITABLE USAGE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. NOT suitable for outdoor use in freeze/thaw climates.

Botany Bay Pebbles Series Sliced Pebbles - Jervis Bay Blend

*** PRICE IS PER SHEET ***

• Material: River Rock
• Sheet Size: 12" x 12"
• Piece Size: Random
• Finish: Natural
• Backing: Mesh

Round mosaics on mesh backing. Create features or cut down to use as borders.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.
Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.

Using an enhancing sealer will darken the color of these stones!

We recommend sealing with a penetrating sealer prior to installation.

Our Academy White and Black Porcelain Mosaic Tile is reminiscent of traditional, multi-texture and multi-color porcelain mosaic floor tile. Featuring a mottled finish and muted color palette, these tiles recreate a classic look with the durability and versatility of a modern tile. Use this tile virtually anywhere, due to its frost resistance, high slip resistance and P.E.I. rating of 4.

• 10.0 square feet, 10 pieces per case. Case weight is 20 lbs.
• Grade 1, first-quality porcelain tile for floor and wall use
• 11.88 in. width x 11.88 in. length x 0.19 in. thick mesh-mounted mosaic
• Glazed, mixed texture with a mixed finish and slight variation in tone
• PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
• Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
• This tile has a COF wet rating greater than 0.60 to 0.79 which is considered skid resistant for indoor and outdoor use. This tile is ADA approved for slip resistance.
• Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
• WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
• Country of Origin: Indonesia

Tierra y Fuego Talavera Mexican ceramic tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind.
PLEASE NOTE: This product is sold by the pound, not by box, therefore we may consolidate orders into one box. Colors & variety of your broken tile order will vary upon availability. Some tiles may Not be broken. We sell them as material appropriate to break since they may have chipped corners or they may come from an odd batch. Colors and variety of broken tile will vary upon availability.

• Each tile is handmade by artisans. The tiles are glazed, decorated by hand, and fired in a kiln.
• Characteristics of Mexican Talavera Tile:
• 1) 1 square foot area requires approximately 3 pounds of broken tile.
• 2) Colors Y variety of your broken tile order will vary upon availability.
• 3) Measurements within a tile may vary by as much as 1/8 in.
• 4) Thickness: 1/4 in.
• 5) Tiles are slippery when wet if used on floors.

6) Industry standard recommends adding 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations.

• 7) Lot variation in size and color may be present.

8) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all handmade ceramic tiles.

• 9) Talavera tiles are NOT frost proof.

SUITABLE USAGE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. NOT suitable for outdoor use in freeze/thaw climates.

• Orion Natural Interlocking 12"x12" Pebbles

With its black and white look, our Orion tile set is perfect for contrasting bold colors and more modern looks. Its starkness highlights the streamlined simplicity of any design.

• The ancient enchantment of jade l

Unique without compromise, the Handicraft Collection is a fresh take on artisan mosaic tiles. Each item in the collection was designed to fit seamlessly within a wide variety of home and commercial decors. If you're looking to liven up a kitchen, add eleg

Each pebble is carefully selected and hand-sorted according to color, size and shape in order to ensure the highest quality pebble tile available. The stones are attached to a sturdy mesh backing using non-toxic, environmentally safe glue. Because of the unique pattern in which our tile is created they fit together seamlessly when installed so you can't tell where one tile ends and the next begins!
Please note: This is a natural tile, as such will have fistulas and coloration varients that occur naturally depending on the cut of the stone.

Usage:

Shower floor, bathroom floor, general flooring, backsplashes, swimming pools, patios, fireplaces and more. Interior & exterior. Commercial & residential.

Details:

• Sheet Backing: Mesh
• Sheet Dimensions: 12x12
• Pebble size: Approx 3/4 to 2 1/2
• Thickness: Approx 3/8
• Finish: Natural Sliced Green
• Number of Pieces Included: 1
• Sq. ft. per 1 Quantity: 1
• Mesh Backing

• Pebbles Series Leaves Series - Aspen
• *** PRICE IS PER SHEET ****
• Material: Stone
• Sheet Size: 12" x 12"
• Piece Size: Random
• Finish: Honed
• Backing: Mesh
• Leaves mosaics on mesh backing. Create features or cut down to use as borders.
• Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

• Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
• Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

• Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.
• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.
• Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.
• Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.
• Be sure to order enough tile for your entire job. Over-estimating the square footage on a project will allow for unusual shapes, miscalculations and broken tiles on the job. Recommends manufacturer a minimum of 10% wastage allowance
• Using an enhancing sealer will darken the color of these stones!
• We recommend sealing with a penetrating sealer prior to installation.

Offering a mosaic look, our University White Porcelain Floor and Wall Tile features a mixed textured finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious, frost-resistant features, this mosaic is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the University Collection. Tile is the better choice for your space!

• 9.8 square feet, 10 pieces per case. Case weight is 18.6 lbs.
• Grade 1, first-quality porcelain tile for floor and wall use
• 11.75 in. width x 11.75 in. length x 0.18 in. thick mesh-mounted mosaic
• Glazed, mixed texture with a mixed finish and slight variation in tone
• PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
• Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
• This tile has a COF wet rating greater than 0.60 to 0.79 which is considered skid resistant for indoor and outdoor use. This tile is ADA approved for slip resistance.
• Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
• WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
• Country of Origin: Indonesia

• Pebbles Series Leaves Series - Woodland Blend
• ** PRICE PER SHEET ***
• Material: Stone
• Sheet Size: 12" x 12"
• Piece Size: Random
• Finish: Honed
• Backing: Mesh
• Leaves mosaics on mesh backing. Create features or cut down to use as borders.
• Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

• Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
• Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

• Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.
• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.
• Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.
• Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.
• Be sure to order enough tile for your entire job. Over-estimating the square footage on a project will allow for unusual shapes, miscalculations and broken tiles on the job. Recommends manufacturer a minimum of 10% wastage allowance
• Using an enhancing sealer will darken the color of these stones!
• We recommend sealing with a penetrating sealer prior to installation.

• Pebbles Series Leaves Series - Chestnut
• ** PRICE PER SHEET ***
• Material: Stone
• Sheet Size: 12" x 12"
• Piece Size: Random
• Finish: Honed
• Backing: Mesh
• Leaves mosaics on mesh backing. Create features or cut down to use as borders.
• Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

• Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
• Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

• Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.
• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.
• Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.
• Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.
• Be sure to order enough tile for your entire job. Over-estimating the square footage on a project will allow for unusual shapes, miscalculations and broken tiles on the job. Recommends manufacturer a minimum of 10% wastage allowance
• Using an enhancing sealer will darken the color of these stones!
• We recommend sealing with a penetrating sealer prior to installation.

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• This mesh-mounted mosaic is a natural stone marble
• This tile has random pieces of flat tumbled rock, mounted on a 12" x 12" mesh sheet for ease of installation
• A blend of elegant shades make it an attractive option to complement any install in a wide variety of design schemes, including kitchens and bathrooms
• Note: Inspect all tiles before installation
• Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc.
• It is recommended to blend tiles from different boxes when installing
• Natural stones may be characterized by dry seams and pits that are often filled
• The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure
• All natural stone products should be sealed with a penetrating sealer
• Grade 1, first-quality natural marble mosaic tile
• Smooth polished finish with a high sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

6 in. x 24 in. Alaska Gray 3D Honed Ledger Panel features a palette of trendy gray tones which evoke a sense of style. This beautiful stone harmonizes with nearly any color scheme and its 3D look and honed finish add subtle dimension and sophistication to any decor. Residential or commercial, they?re perfect for creating beautiful features like accent walls, backsplashes, and fireplace surrounds. Also frost resistant, these versatile panels can be used outdoors for any number of stacked stone projects. ?s Interlocking Z Feature allow the panels to fit together easily, just like puzzle pieces. Achieving a seamless fit has never been easier. Matching corners are available to give your project a professional finish. For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• The natural variation in size, shape, and color of mixed marble pebbles mosaic tile makes it easy to enhance your home decor
• The tumbled pebbles flatter existing home decor with the natural variety of colors
• The durable surface makes it an ideal choice for water exposed and high use areas throughout the home, including a shower, or kitchen backsplash
• Note: Inspect all tiles before installation
• Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc.
• It is recommended to blend tiles from different boxes when installing
• Natural stones may be characterized by dry seams and pits that are often filled
• The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure
• All natural stone products should be sealed with a penetrating sealer
• Grade 1, first-quality natural marble mosaic tile
• Tumbled smooth finish with a low sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

PELE GLAZED PEBBLE BLEND SERIES - ROYAL OCEAN

*** PRICE IS PER SHEET ***

Royal Ocean and Lava Blend

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation.

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• Sliced pebble mosaic is a beautiful blend of colorful hues, offered in an enchanting mix of pebble sizes
• Creating a tranquil ambiance is easy with these warm neutrals
• Durable and water-resistant, these natural marble pebbles are suitable for high traffic areas
• Use them on walls, floors, and countertops — in both homes and commercial properties
• In the bath, they add texture and warmth underfoot for a spa-like appeal, and they’re an especially attractive vanity accent tile
• Grade 1, natural marble mosaic
• Tumbled finish with a low sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• Tumbled pebbles mesh-mounted mosaic is a natural stone marble
• This tile has random pieces of flat tumbled rock mounted on a 11-7/16" x 11-7/16" mesh sheet for ease of installation
• The iridescent mosaic marble tile adds a touch of drama wherever applied, install in a wide variety of design schemes, including kitchens and bathrooms
• Note: Inspect all tiles before installation
• Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc.
• It is recommended to blend tiles from different boxes when installing
• Natural stones may be characterized by dry seams and pits that are often filled
• The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure
• All natural stone products should be sealed with a penetrating sealer
• Grade 1, natural marble mosaic
• Tumbled smooth finish with a low sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• 11-7/16" x 11-7/16" mesh-mounted mosaic is a natural stone travertine
• This tile has random pieces of flat tumbled rock mounted on a 12" x 12" mesh sheet for ease of installation
• A blend of various shades of color make it an attractive option to complement any install in a wide variety of design schemes, including kitchens and bathrooms
• Note: Inspect all tiles before installation
• Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc.
• It is recommended to blend tiles from different boxes when installing
• Natural stones may be characterized by dry seams and pits that are often filled
• The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure
• All natural stone products should be sealed with a penetrating sealer
• Grade 1, first-quality natural marble mosaic tile
• Tumbled smooth finish with a low sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• Sliced pebble mosaic is a beautiful blend of colorful hues, offered in an enchanting mix of pebble sizes
• Creating a tranquil ambiance is easy with these warm neutrals
• Durable and water-resistant, these natural marble pebbles are suitable for high traffic areas
• Use them on walls, floors, and countertops — in both homes and commercial properties
• In the bath, they add texture and warmth underfoot for a spa-like appeal, and they’re an especially attractive vanity accent tile
• Grade 1, natural marble mosaic
• Tumbled finish with a low sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• This pebbles mosaic is a natural stone 11-7/16" x 11-7/16" marble mosaic that is used extensively to complement bathrooms, showers, backsplashes, flooring and fireplaces in a combination of designs creating unique looks
• Make a statement by adding your creative touch using these decor items
• NOTE: Inspect all tiles before installation
• Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc.
• It is recommended to blend tiles from different boxes when installing
• Natural stones may be characterized by dry seams and pits that are often filled
• The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure
• All natural stone products should be sealed with a penetrating sealer
• After installation, vendor disclaims any liabilities
• Grade 1, marble pebble mosaic tile
• Tumbled smooth finish with a low sheen and random variation in color
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

PELE GLAZED PEBBLE BLEND SERIES - BLUE HAWAIIAN

*** PRICE IS PER SHEET ***

Blue Hawaiian and Lava Blend

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation.

PELE GLAZED PEBBLES SERIES - SEA TURTLE

*** PRICE IS PER SHEET ***

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation.

Pebbles Series Leaves Series - Forest Blend

• ** PRICE PER SHEET ***
• Material: Stone
• Sheet Size: 12" x 12"
• Piece Size: Random
• Finish: Honed
• Backing: Mesh
• Leaves mosaics on mesh backing. Create features or cut down to use as borders.
• Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

• Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
• Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

• Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.
• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.
• Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.
• Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.
• Be sure to order enough tile for your entire job. Over-estimating the square footage on a project will allow for unusual shapes, miscalculations and broken tiles on the job. Recommends manufacturer a minimum of 10% wastage allowance
• Using an enhancing sealer will darken the color of these stones!
• We recommend sealing with a penetrating sealer prior to installation.

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• Sliced pebble mosaic is a beautiful blend of colorful hues, offered in an enchanting mix of pebble sizes
• Creating a tranquil ambiance is easy with these warm neutrals
• Durable and water-resistant, these natural marble pebbles are suitable for high traffic areas
• Use them on walls, floors, and countertops — in both homes and commercial properties
• In the bath, they add texture and warmth underfoot for a spa-like appeal, and they’re an especially attractive vanity accent tile
• Grade 1, natural marble mosaic
• Tumbled finish with a low sheen and random variation in tone
• Impervious tile has water absorption of less than 0.5% for indoor or some outdoor use
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

PEBBLES SERIES LEAVES SERIES - JERVIS BAY BLEND

*** PRICE IS PER SHEET ***

• Material: Stone
• Sheet Size: 12" x 12"
• Piece Size: Random
• Finish: Honed
• Backing: Mesh

Leaves mosaics on mesh backing. Create features or cut down to use as borders.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.

• Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.

Be sure to order enough tile for your entire job. Over-estimating the square footage on a project will allow for unusual shapes, miscalculations and broken tiles on the job. Recommends manufacturer a minimum of 10% wastage allowance
Using an enhancing sealer will darken the color of these stones!

We recommend sealing with a penetrating sealer prior to installation.

PELE GLAZED PEBBLE BLEND SERIES - TEAL TIDE

*** PRICE IS PER SHEET ***

Teal Tide and Lava Blend

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation.

Please review Build.com return policy for Flooring and Tile Products, certain restrictions may apply on general returns. If flooring arrives damaged or is defective, please call for assistance (800-375-3403)Features:

• 12" x 12-3/16" mesh-mounted mosaic is a natural stone marble
• This tile has random pieces of flat tumbled rock, mounted on a 12" x 12-1/5" mesh sheet for ease of installation
• A blend of multi color shades make it an attractive option to complement any install in a wide variety of design schemes, including kitchens and bathrooms
• Note: Inspect all tiles before installation
• Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc.
• It is recommended to blend tiles from different boxes when installing
• Natural stones may be characterized by dry seams and pits that are often filled
• The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure
• All natural stone products should be sealed with a penetrating sealer
• Grade 1, first-quality natural marble mosaic tile
• Tumbled smooth finish with a low sheen and random variation in tone
• Impervious flooring has water absorption of less than 0.5%
• Completely frost resistant for indoor or some outdoor applications
• Use a latex-modified thinset for acceptable bond strength
• This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product

PELE GLAZED PEBBLES SERIES - ROYAL OCEAN

***** PRICE PER SHEET *****

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation.

• PELE GLAZED PEBBLE BLEND SERIES - SEA TURTLE
• Sea Turtle and Lava Blend

*** PRICE IS PER SHEET ***

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation

PELE GLAZED PEBBLES SERIES - BLUE HAWAIIAN

**** PRICE IS PER SHEET ****

• Material: Basalt
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Glossy
• Backing: Mesh

In Hawaiian legend, Pele is the goddess of volcanoes and fire. The Pele Pebble Series showcases that legend by presenting unique lava pebbles made of Italian Basalt, glazed and mixed with rich, vibrant colors. The pebbles are carefully rounded and hand glazed one sheet at a time. The technique pairs Italian quality and artistry for your most creative design concepts.
Basalt is extracted from a deep layer of solidified volcanic flow, these pebbles are tumbled and then hand glazed in vibrant colors. Once glazed, the pebbles are fired at 1000 degrees Celsius allowing a strong bond much like a ceramic tile.
Pele Pebbles are an artisanal product and are decorated by hand, therefore may have shade variations that are not defects, but characteristics of the product.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Glazed Pele Pebbles can be used on interior wall applications.
• Sealing is required before and after grouting.
• A natural stone, water based sealer is recommended.

We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.

• We recommend sealing with a penetrating sealer prior to installation.

Random-toned Arabescato Carrara pattern comprises this fabulous 12 in. x 12 in. It comes in 4 different sized pattern on plastic mesh. It’s compatible with subsurface heating elements and is impervious to water, so the installation options are plentiful for floors and walls in kitchens and bathrooms. Frost-resistance makes them suitable for exterior applications and they are highly skid-resistant to foster solid footing. Use this mesh-mounted tile in any commercial or residential setting for an upscale look without the hefty price.

• Arabescato Carrara Mini Pattern 12 in. x 12 in. Polished Marble Mosaic Tile offers,
• Grade 1, natural marble mosaic for floor, wall and countertop use
• Thickness 0.4″
• 4 different sized pattern and it comes in 12″ x 12″ Mesh.
• Polished finish with a high sheen and random variation in tone.
• Little variation one tile to another which creates a premium look to your floors and walls.
• Great mosaic for backsplashes.
• Impervious flooring has water absorption of less than 0.5% for indoor or some outdoor use and is frost proof
• Frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength

6 in. x 24 in. Alaska Gray 3D Honed Ledger Panel features a palette of trendy gray tones which evoke a sense of style. This beautiful stone harmonizes with nearly any color scheme and its 3D look and honed finish add subtle dimension and sophistication to any decor. Residential or commercial, they?re perfect for creating beautiful features like accent walls, backsplashes, and fireplace surrounds. Also frost resistant, these versatile panels can be used outdoors for any number of stacked stone projects. ?s Interlocking Z Feature allow the panels to fit together easily, just like puzzle pieces. Achieving a seamless fit has never been easier. Matching corners are available to give your project a professional finish. For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

PEBBLES SERIES LEAVES SERIES - MESQUITE

**** PRICE PER SHEET ****

• Material: Stone
• Sheet Size: 12"x12"
• Piece Size: Random
• Finish: Honed
• Backing: Mesh

Leaves mosaics on mesh backing. Create features or cut down to use as borders.

Suitable for floor, walls, kitchen splash back, wet areas, exterior frost-free zones etc.

Note: Due to the characteristics of natural stone being porous, it is always recommended to seal natural stone. This will lower the risks of staining and will make it easier to clean using suitable cleaning products.

Installation Instructions

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8"away from any naked flame.

Setting Materials and Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

• Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
• Only use setting materials that meet or exceed TCNA guidelines
• Only use an accredited licensed contractor experienced in the art of installing mosaic products.
• Setting methods must conform to the TCNA guidelines.

Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.

• Do not cover/protect the Victoria Metals with adhesive tape of any kind.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. FlooringSupplyShop.com is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Recommended Substrates:

• Sealing prior to grouting is recommended for all stone mosaics.
• Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
• Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
• Note: Only use water based sealers with Sydney Harbor Metals.

Be sure to order enough tile for your entire job. Over-estimating the square footage on a project will allow for unusual shapes, miscalculations and broken tiles on the job. Recommends manufacturer a minimum of 10% wastage allowance
Using an enhancing sealer will darken the color of these stones!

We recommend sealing with a penetrating sealer prior to installation.