- 9.8 square feet, 10 pieces per case. Case weight is 22.6 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.75 in. width x 11.75 in. length x 0.22 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a mixed finish and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has no available COF wet rating. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
Number of Pieces Per Order: 10
- 8.0 square feet, 10 pieces per case. Case weight is 14.8 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 9.75 in. width x 11.5 in. length x 0.21 in. thick mesh-mounted mosaic
- Glazed, slightly textured finish with a low sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
- 10.5 square feet, 10 pieces per case. Case weight is 18.02 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.88 in. width x 12.63 in. length x 0.21 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
- MOSAIC PORCELAIN PENNY ROUND - DEEP OCEAN BLUE
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Mixed Blue
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- MOSAIC PORCELAIN PENNY ROUND - MARBLE GREY MATTE
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 12 1/4"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness: 1/4"
- Colors: Marble Grey
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- MOSAIC PORCELAIN PENNY ROUND - SHADOW
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Mixed Blue and Brown
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- 8.6 square feet, 10 pieces per case. Case weight is 17.81 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.25 in. width x 11.75 in. length x 0.25 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a medium sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
Pool Rated for use in Swimming Pools
Porcelain mosaic in penny-sized pieces
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Medium Grey
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- MOSAIC PORCELAIN PENNY ROUND - FANCY WHITE
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: White
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** Price is per Sheet 0.90 sq ft ***
- Material: Marble
- Sheet Size: 11"x11.75"
- Thickness: 3/8"
- Colors: Green White
- Finish: Matte finish
- MOSAIC PORCELAIN PENNY ROUND - LIGHT BLUE
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Light Blue
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
- MOSAIC PORCELAIN PENNY ROUND - SKY BLUE
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Mixed Blue Grey White
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Please note: Each order start from 1 Carton ( 11 Sheets and 11 Sq Ft )
- This penny round backsplash and wall tile brings together two of today’s hottest looks in shape and color—featuring charming small tiles in a beautiful hue
- Retro inspired with a refreshing modern matte finish, these tiles give walls, backsplashes, shower surrounds, and even countertops a punch of pattern and dimension
- In the kitchen, bath, or other space—residential to light commercial— penny round mosaic works overtime to give your project a personality all its own
- Tiles are mounted on mesh-backed sheets for simplified installation and a professional finish
- Grade 1, first-quality porcelain mosaic tile
- Smooth finish with a low sheen and slight variation in tone
- Impervious flooring has water absorption of less than 0.5% for indoor or some outdoor use
- Completely frost resistant for indoor or outdoor applications
- This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product
- This penny round backsplash and wall tile brings together two of today’s hottest looks in shape and color—featuring charming small tiles in a beautiful hue
- Retro inspired with a refreshing modern matte finish, these tiles give walls, backsplashes, shower surrounds, and even countertops a punch of pattern and dimension
- In the kitchen, bath, or other space—residential to light commercial— penny round mosaic works overtime to give your project a personality all its own
- Tiles are mounted on mesh-backed sheets for simplified installation and a professional finish
- Grade 1, first-quality porcelain mosaic tile
- Smooth finish with a low sheen and slight variation in tone
- Impervious flooring has water absorption of less than 0.5% for indoor or some outdoor use
- Completely frost resistant for indoor or outdoor applications
- This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product
- 8.0 square feet, 10 pieces per case. Case weight is 14.5 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 9.75 in. width x 11.5 in. length x 0.22 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
*** Price per is Sheet 0.90 sq ft ***
- Material: Onyx Marble
- Sheet Size: 11"x11.75"
- Thickness: 3/8"
- Colors: Green White Yellow
- Finish: Matte finish
- 4.75 square feet, 5 pieces per case. Case weight is 8.35 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.5 in. width x 11.63 in. length x 0.16 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating I is suitable for light-duty residential floors, bathrooms and bedrooms without direct access from outside; no scratching dirt can be present
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has no available COF wet rating. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Japan
Pool Rated for use in Swimming Pools
Porcelain mosaic in penny-sized pieces
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 12 1/4"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness: 1/4"
- Colors: Dark Grey
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
*** Price is per Sheet 0.88 sq ft ***
- Material: Marble
- Sheet Size: 11"x11.50"
- Thickness: 3/8"
- Colors: Blue White
- Finish: Matte finish
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Pool Rated for use in Swimming Pools
Porcelain mosaic in penny-sized pieces
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 12 1/4"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness: 1/4"
- Colors: Light Grey
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
*** Price is per Sheet 0.90 sq ft ***
- Material: Marble
- Sheet Size: 11"x11.75"
- Thickness: 3/8"
- Colors: Green White Gray
- Finish: Matte finish
*** Price is per Sheet 0.90 sq ft ***
- Material: Marble
- Sheet Size: 11"x11.75"
- Thickness: 3/8"
- Colors: Blue Gray White
- Finish: Matte finish
Pool Rated for use in Swimming Pools
Porcelain mosaic in penny-sized pieces
Price per Sheet
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 12 1/4"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness: 1/4"
- Colors: Natural Grey
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
*** Price is per Sheet 0.90 sq ft ***
- Material: Marble
- Sheet Size: 11"x11.75"
- Thickness: 3/8"
- Colors: Green White Gray Black
- Finish: Matte finish
- 8.6 square feet, 10 pieces per case. Case weight is 17.81 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.25 in. width x 11.88 in. length x 0.18 in. thick mesh-mounted mosaic
- Glazed, mixed texture with a mixed finish and uniform appearance in tone
- PEI Rating I is suitable for light-duty residential floors, bathrooms and bedrooms without direct access from outside; no scratching dirt can be present
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has no available COF wet rating. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
- Any payment made towards a sample from us will be refunded back in full (including shipping) when you order 50 sqft or more, making samples absolutely FREE.
- Samples are swatches of the original product and vary in size from 4 to 6 inches, depending on the product line and availability.
- Samples are meant to give the touch/feel effect, color tones and surface finish etc. You may not be able to use it for your install. We do provide actual lot specific pictures on request to give you an even better idea.
- Samples are shipped using UPS ground, USPS priority mail or similar. Occasionally you might receive a damaged or cracked piece, however, please note that samples still deliver the above message as they are NOT THE ACTUAL product and just samples for you to see the tones. The actual product will be shipped Insured and packed much better for its safety.
- Maximum samples allowed per product per order is one. All orders having more than one sample of the same product will be processed as one sample.
- Size: 12.99 x 9.37 inch;
- Thickness: 5/16 inch;
- Finish: Honed (Matte);
- Nero Marquina Black Marble 1" (from point to point) hexagon pieces mounted on 12x12" mesh backing tile sheet
- 12 rows and 14 columns with 168 stones on each sheet; 5/16" thickness; Honed finish
- First Quality; Natural Beauty; Carefully Selected; Consistent in size and finish; Factory Direct
- Price per sheet (1 sq.ft.); Large quantities in stock
- Number of Pieces Included: 1
- Sq. ft. in 1 Quantity: 1
- 0.96 square foot per piece, each piece sold individually. Piece weight equals 2.76 lbs.
- Grade 1, first-quality glass tile for floor and wall use
- 11.25 in. width x 12 in. length x 0.26 in. thick mesh-mounted mosaic
- Unglazed, smooth finish with a mixed finish and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Imported