Software
Houzz Logo Print
meganlanephotos

Bleaching Wood Floors?

12 years ago
last modified: 12 years ago
My husband and I have been working on a number of home improvement projects these past few months. We've painted the ceilings and walls in the living room, kitchen, mudroom and spare bedroom. We've converted the playroom closet into a book nook. We've constructed a built-in day bed out of wood in the spare guest bedroom. We've painted all of our kitchen cabinets and drawers white. We've even used a cream colored chalk paint on all of our knotty pine furniture. Needless to say, we've been busy. We are far from experts, in fact.. we're beginners. Complete beginners.

With that being said, I hate my hardwood floors. I hate the color. The shiny-ness. Everything about them, really. I am a big fan of white-washed bleached wood flooring. I don't know what type of wood my floors are.. they came with the house when I bought it. Do you all know what they are? I am attaching a picture of my current wood floors and a picture of the type of floors I want. How can I achieve this look without ripping out my floors and installing new flooring?

I spoke with two wood floor refinishers in my area and was given estimates. I have 300 square feet of wood floor. First estimate was $700, second was $1000. I live in Long Island, NY. Are those good prices? I was told they sand first, then stain and then add 3 coats of polyeurathane. Supposedly a 3-5 day project, is that correct?

Now, my problem is this: The flooring specialists told me that they don't recommend bleaching the floors. They said it will make it practically white with barely any grain showing. Isn't that what I want, though? I've done some research online, and most people who are whitewashing their floors are bleaching them first? How do I do this? I don't know how to explain what I want to the experts, because they don't seem to know what I'm talking about! How is a whitewash done? Is it sanded, bleached, stained and then sealed? What would be a fair estimate for the job? Is it something my husband and I could do ourselves potentially?

Thank you so much in advance!! I love turning to Houzz when I have problems with my projects!

PS: Sorry that the pic of my wood floors isn't that great. I couldn't find a picture on my computer that had the floors as the focus. That is the only thing I could find that showed them at all.

Comments (42)

  • 12 years ago
    Do you really want to move everything out of your house for a month whie you struggle to master a floor sander enough to get to bare wood witout creating divots in the floor or sanding through the tongue? Then using noxious and unsafe chemicals to bleach it? Then trying to figure out which topcoat won't amber your results and that you can apply smoothly and without debris in the finish?

    The prices you are getting are for standard refinishing. NOT bleaching or whitewashing. They woud be double that. Or more. Plus take more time.

    Live with what you have. Or replace them with prefinished. It will be tons easier on you than the above.
  • 12 years ago
    Thank you for your response. How would I replace them with prefinished? Wouldn't that be even more expensive than hiring someone to whitewash them? It is only a 300sq foot area, so maybe it wouldn't be that bad to hire someone to rip out the current wood and install pre-bleached/white washed wood? I wonder if some place like Home Depot does free installation? I know they do that with carpetting..
  • 12 years ago
    last modified: 12 years ago
    I found a few articles online that talk about white-washing hardwood floors with Annie Sloan Chalk Paint. They claim you don't need to sand first. Simply apply and seal with Annie Sloan Floor Laquer. Here is a link: http://katedeez.com/field-notes/2013/1/14/a-white-washing-weekend-annie-sloan-chalk-paint And another: http://www.anniesloan.com/acatalog/Bringing_out_the_Grain_in_Oak.html

    I read at least five articles that talk about this method. I wonder if this would work? It seems too good to be true.. What do you all think? I suppose I could do a test spot and see how it comes out..
  • PRO
    12 years ago
    The cost = sand and refinish. There cost does not include bleaching. The sand and refinish = 3 - 5 days for the product to cure (the soft finish to harden enough to put furniture back on it).

    You might find you have a stain on the floor, or the finish is an oil based product that turned orange and the photo is in low lighting.. The grain is pretty heavy so you might have oak. It will be hard to tell if you have white oak or red oak. Probably red because of the colour coming through on the photo.

    If this is red oak, you are going to have a bit of an issue finding the 'right' stain/colour to get the bleached oak you are looking for. White oak is much easier to work with. White oak becomes pale blond...if you have white oak and use a "clear coat" (ie. water based) polyurethane that DOES NOT AMBER, then you will have a wood coloured floor that will get ligther as it ages.

    If you are set on painting out these floors, you should be aware that once done, it may not be 'undone' without tremendous effort/money. If you are really set on having the bleached out interior of a 'beach house', you may want to look at a laminate in the same colour. Click the laminate together and then watch the room transform. A laminate installation for 300sf is roughly a single day of work + moving out/moving in furniture one more time.

    Any paint/liquid you put down on this floor is going to take 3-10 days to "cure" = harden enough to put furniture back down. You might find it "cheaper" to lay a pretty laminate that can be removed in 7 years than it is to paint over this finish...and then find out you can't get the paint off in 7 years.

    It might be an issue...it might not be. I would ask flooring professionals what they have come across with "painted" floors like the chalk paint you are thinking of. You might be surprised to hear the language that comes out of their mouths!

    FYI: here are some cork floating floors in the colour you are looking for: $3.39/sf - $4.59/sf
  • PRO
    12 years ago
    I agree that you want to have it professionally done. You will mess it up if you do it yourself. It appears that your floor is red oak. When it is bleached you end up with a pinkish tone that you will not be able to get rid of. Have you considered painting the floor with floor paint? That way, you can get a light floor like your last photo. Use the very best floor paint you can find and apply 3 coats in a dust free environment. you will need to do a light sanding, but it could be done by hand. Follow the instructions to the letter and you will be happy in the end.
  • 12 years ago
    Jump ahead a few years to imagine if you'll tire of the bleached look. It's a trend now and I feel that it's best only if the architecture of the house interior and exterior, is consistent with the look. Once bleached, you can't go back other than paint ... a thumbs down for resale value. Would you be doing all the rooms or just one?
  • 12 years ago
    Those are reasonable prices. I have done it myself before. It is a dirty difficult exhausting job if you are learning as you go. You will never get a smooth sand the first time out.
  • 12 years ago
    What about vinyl plank flooring? The peel and stick, floating kind? I saw them at Home Depot today and it was inexpensive. Like $2.09 per square foot. Would that work? They said it could be installed right over my old hardwood floors, as long as they were in good condition. Are these any good? I would be happy as long as they lasted me a good 5-7 years before needing to replace.
  • PRO
    12 years ago
    Vinyl planking is an excellent option. It comes in just about any colour you can imagine and can be easy (enough) to be a DIY project. If you are using a stick down product, you need to know that you will ruine the finish on the hardwood. If you use a floating floor the floors will be left in very good condition. A loose lay product (such as Armstrong) is much more expensive than what you are showing. Remember: you will need to add in the cost of underlay.

    If you are happy with 7 years worth of "wear"...do not paint/bleach these floors. Work with a floating floor system that can be torn up after a few years to reveal perfectly respectable flooring underneath.

    "Good condition" is a misnomer. The sales-person (I hesitate to say "expert") at HD should have explained what "good" means. It means flat and even. Most vinyl products CANNOT HANDLE a wavy floor. You can check the level/waviness with a 4ft straight edge. If you have one of these, you are ready to install a floor by yourself. If you don't know what it is then you are better off asking for an installation package.
  • 12 years ago
    No on the vinyl...downgrade
  • 11 years ago
    I know this post of mine is old but I wanted to let everyone know that I ended up deciding to have them refinished professionally. As much as the laminate flooring seemed like the easier option, I really wanted to have real wood floors. I checked with the company who gave me the $700 quote, and they said that price DOES include the sanding, bleaching, staining and three coats of water-based poly. They started the job yesterday. They sanded and applied one coat of bleach. Today they will apply a second coat of bleach and then come back several hours later to apply a white-wash stain. Tomorrow they will begin the waterbased poly. We will be sleeping at a local bed and breakfast while the work is being done. I was very nervous about the quality of the work, due to the low price. So far, I love it, though! I came home last night to check on everything and it looks beautiful so far. I cleaned up the sawdust and the mess.. took about an hour, but it was worth it. Yesterday it was three men who were here working and today I think it'll just be the owner. I am attaching a picture of the floors after the first coat of bleach from yesterday. They are planning to do a second coat before staining. Do you think that is necessary? It seems pretty light already and I don't want to go to light. I want to know if you all think I should have him go ahead and bleach again.. I don't want to make a decision I'll regret! I'm just happy it came out the way I wanted.. for $700, you can't beat it. We even found a hotel locally with an aquarium attached for only $110 a night! I live in NY, where things are usually extremely expensive.. but I'm not in NYC, I am located on Long Island. Whenever you find something at a decent price here, it's a miracle. Let me know what you all think about a second coat of bleach.. Also, do you think I can come back home the night they finish the water based poly? Or should I stay at the hotel an extra night to ensure it is fully dry? Thanks!
  • PRO
    11 years ago
    last modified: 11 years ago
    Typically, LIGHT sanding/abrading & a second pass with the bleach is a recommended procedure to insure uniformity and balance out some of the "yellowish" spots that result from the chemical reaction.
    But by no means is it mandatory.
    That being said, obviously the results will be a bit more light, so unless you want a VERY white as opposed to a "whitewashed" look... (there's a difference), the staining process will be critical.
    Perhaps your finisher can do some test patches on some EXTRA red oak laying around, although it sounds like the clock is running down at this point.
    I'm sure someone can find some.
    It's better to use scraps as the "lab rat" than your floor. That way there's no "oops!"
  • PRO
    11 years ago
    So glad for the update! I'm excited to hear the project is moving ahead in an orderly manner! So far it is working out with the colouring. I'm wondering if the second application will tone down the pink? My experience with our white cork floors is: the more coats of white the less the pink/beige tones show through. My "6 coat" white is pristine white with blue undertones. My "2 coat" white = white wash with beige/pink undertones.

    For $700 and a few days vacation = great deal! I'm glad you stayed in the area and were able to keep an eye on things. Very good decision. It is tempting to go FAR away so that you return to a fresh new look....but that is when things go down hill and you don't have the means to say "Stop"!

    Fingers crossed that the next steps work as planned!
  • PRO
    11 years ago
    Looks like your flooring contractor got off to a good start! Very happy to see you choose to let one of us proa do the work! You will be happy you did. 700$ was more than fair. I would've been about 1200. Can't wait to see the finished product.
  • 11 years ago
    Anxious to hear how you love this once it is done. Good for you!
  • 11 years ago
    Yes, please give us a report on final result. I'd go all the way white myself.
  • 11 years ago
    Thank you all so much for your comments and positive words. My stay at the hotel was amazing.. it's rare I get a mini-vacation (yet alone a full one!) Moneys tight, so hotel stays are a once in a decade thing for our family. Moving on to the more important topic, the floors are finished! I decided to skip the second coat of bleach. I was scared they'd end up too white. I love whitewashed floors, shabby chic decor, little beach cottages and all of that.. BUT, almost everything in my home is all white already.. furniture, walls, etc. I was afraid that if the floors ended up too white, my house would look like an institution. The picture I put in my original post was how I wanted it.. not too white, but still whitewashed. The flooring men did one coat of stain, and the following day they finished up with three coats of satin water-based poly. I came home everyday two times to check on the floors, just to make sure that everything was going accordingly. I asked the men to do samples on scrap red oak, just so I could see which stain was best for me. They didn't seem to understand what I was asking them for, or maybe they just didn't want to do that. I guess when you pay as little as $700, you don't get all the fancy extras, lol. Anyway, the stain came out good. It wasn't as "white-wash" as I had hoped (or expected.) It seemed almost like they diluted a white stain with a lot of clear stain. Of course I am just speculating, I'm not sure of this. My reason for saying this is that the floors didn't look that much different after the stain. Only slightly. I still loved it at this point. They finished up with the satin poly. It was perfect, just like I wanted. My floors used to have semi-gloss poly and I thought that it was too shiny.. like a bowling alley or something. I wanted the floors to look almost like bare drift wood or unfinished bleached barn wood or something. The men told me they couldn't use flat/matte, so satin was my best bet. The floors are now shiny enough that I can clean them if something spills BUT matte enough that I love the appearance. So, it was a success. My only two complaints about the job would be: A. the stain was practically clear.. only very subtle and B. they didn't do my floor molding. Not the molding on the the walls, but the molding that is directly on the floors that separates rooms. We only have three pieces of it, but they didn't refinish that. Is that normal? I thought maybe their sanding machines couldn't work on something that small? It's not the end of the world, though.. I'll just paint it all-white or buy new molding for those areas. My final words about the project are that they came out amazing.. especially for $700. I had a lot of fears going into this commitment.. and all of them stayed exactly that.. fears. The men who worked in my home were courteous, clean (as much as they could be) and did the job as nicely and quickly as possible for us. I would definitely give them a good reference and use them again in the future, if need be. I am posting pictures below.. Since they were taken with my crappy cell phone camera, the photos are not exactly true to their actual color. The floors are a bit whiter in person (especially in the picture with our xmas tree). I'd love to hear all of your thoughts.. Thank you again for helping me through the whole process!! :)
  • PRO
    11 years ago
    I would say messy messy project and the estimates were actually low, curious of their experience with their prices. How can u charge $700 for a weeks worth of work and pay for material, not possible! U would starve ur family. So, either they live simple lives and are not greedy or they don't have the experience to do it correctly! Take a spare piece, scuff it with a 220 grit paper, stain as ya want, let dry, LIGHTLY sand the stained piece with 220 and then use a lambs wool to wipe on a water based polly.
  • 11 years ago
    Did he neutralize?
  • 11 years ago
    Sophie, I couldn't be sure. Like I said, I wasn't here for the whole process. I was staying at a hotel near my home. I popped back and forth periodically just to check on everything, but I didn't mention/ask about neutralizing. If it is a crucial step in bleaching wood floors, I would assume that they did.
  • 11 years ago
    I am so happy for you, as it looks like your dream came true. YAY!
  • PRO
    11 years ago
    Yeah abbyjean! I am happy for Megan!
  • PRO
    11 years ago
    Megan, I been researching about this subject _ bleaching old wood floors, for a a little while. I think I finally found my answer from your post and everybody's responses. I am glad to hear/read about it! I am glad that you got what you expected. Congratulations on your project! I think your floor looks beautiful! I would love if you could share the contact information of your "wood flooring bleaching guys" with me. My husband and I bought a house in Long Island... we are moving in a month. I am checking the possibility to do the same on the floor of the house that we are moving. It would be great to get an estimate from your contractor. I greatly appreciate if you could share that. Thanks, and enjoy your new floor!
  • 11 years ago

    RG Art & Design, I'm happy my post has helped you to decide which method you plan to use on your floors. I'm not sure where on Long Island you are moving, but I am from the Riverhead/Calverton area and the flooring contractor I used is located in Shirley.


    The owner's name is Bruno. My house has only about 300 square feet of wood flooring, and he charged me $700, including supplies. This estimate included sanding, bleaching, staining and 3 coats of satin water-based poly. Sometimes he came by himself, and did the work himself. Other times his son and 2 additional helpers came and did the work. Sometimes they all came together. The rate included my living room, hallway and two stairs going down into the carpetted playroom.


    My complaints would be that they were late a lot... 30 minutes late one day, 45 minutes late another day. That being said, Bruno always called me to let me know that he was running late. The sanding day I left for 5 hours, and they sanded while I was gone. They did a decent job of cleaning up the sawdust. They also put down the first coat of bleach on the first day. The following day Bruno planned on doing a second coat of bleach. I asked him not to, as I was afraid the floors would become too light. Now, I regret that. I should've gone with the 2nd coat. It's not a big deal, it's just that now that I've thought about it, I would've preferred them lighter. But that's my fault, not his. I opted to stick with just the one coat. So, the second day he stained. He used a white, oil-based stain, I believe. This didn't make much of a difference. It was subtle change.. the bleaching did most of the "white washing effect." I stayed at a hotel on that second night. He recommended that we not be home on the staining day, or that night. We have a 4 year old daughter, and so it's not good to breathe in those chemicals. The third day, he applied the 3 coats of water-based poly. He started at around 9AM... the hotel check out was for noon. I was able to come home at 3PM that day, and he was finished.

  • 11 years ago

    RG Art & Design.. Lastly, My other complains would be that he didn't whitewash the trim molding on the stairs and he didn't remove the molding at the bottom of the walls in my house to do the floors. It's not a huge deal, but we had to pain the trim molding on the stairs ourselves and the white-washing job around the edge of the walls isn't perfect. It's not really noticeable, though. If you hire someone who charges $1500-$2000, I'm sure they would've done it differently. But, we paid $700, and you get what you pay for. All in all, I am happy with the job they did. If I could go back, I'd definitely hire them again. The floors don't have as smooth of a finish, as I would've liked. It's bumpy in just a few areas. Mostly by the walls. Be sure to clean your floors thoroughly after they sand. There was two spots where I found a piece of hair poly'ed to my floors, lol. Luckily I was able to remove it. I would recommend Bruno to anyone who needs the job done on a budget. My floors look beautiful.. and I am very, very happy with them. I only told you my complaints, so that you would know what to expect ahead of time. His phone number is 631-295-0919. Please tell him that Megan from Riverhead referred you! His ad says, "$2 per squre foot for whitewashing and $1 per sq ft for just poly and sanding. Good luck! Let mw know what happens. PS, do you do interior design services? I've been looking for someone to help me with my house..

  • 11 years ago

    Do you know what type of wood floors you had? Pine? Oak? Thank you much!

  • PRO
    11 years ago
    last modified: 11 years ago

    @iloverelaxbear ...

    I can't say what the original poster had for flooring, but I'll suggest that Oak bleaches quite nicely... red or white, depending on what you have to work with, and what you want as a result. I've never worked with PINE, so can't really comment on what the outcome would be.

    This is just in case nobody else "sounds off" in response to your question.

  • 11 years ago

    It's really hard to see in the original photo, but my guess is oak


  • 11 years ago
    is it bleached or whitewashed? you mention both... confused
  • 11 years ago

    Stefanie Fang, They were red oak. I was hesitant going into this because I read all over the internet that bleaching red oak causes it to turn pink. Luckily, that did not happen. It looks fine. I should have had the second coat of bleach done, to make them whiter, but I was afraid they'd end up too white. All in all, I am still very happy with the way they look. Best $700 spent!

  • 11 years ago

    Mod-man, The flooring company used both bleach and a white-wash stain. They started with sanding and applying one coat of bleach the first day. The second day they asked if I wanted a second coat of bleach, I declined- in fear they'd end up too light. So, instead they applied a white-wash stain the second day. The third day they applied three coats of water-based poly. They used water-based so that they wouldn't amber over time.

  • 10 years ago

    So glad this worked out for you! I am considering doing the same!

  • PRO
    10 years ago

    GURL. For $700, they look AWESOME! Congrats!

  • 10 years ago

    I know this is an older post, I came upon it while looking into bleaching my oak floor in my bedroom and just wanted to say that I spent the last weekend refinishing my floors and it was pretty easy (but I haven't put down the poly in the bedroom yet- really want to try bleaching) The posters who wrote that you would ruin your floors or needed a lot of practice are probably thinking of an orbital sander. Nobody renting a sander to do a diy project would rent one of those. Go to any tool rental place and they'll recommend a drum/barrel sander. You use it like you would a vacuum. It was super easy and I had no problems. I sanded down to the bare wood on my 100 year old golden oak floors and got rid of all the old finish, stain and all of the dark stains from some type of damage that happened probably ages ago and many of the deep scratches as well.


    I just wanted to share that in case anyone else reads the first few comments and thinks they can't sand their own floors. It's totally do-able! I'm a single gal and was able to do it with zero help.


    But $700 is such a good deal! you got quite a bargain and your floors look amazing!!

  • 10 years ago
    A success story indeed! Congratulations for your courage and diligence to follow your dream.
  • 10 years ago

    Hello! Catching this after the fact but just want to say that I'm so glad you kept the original wood flooring and think your project turned out wonderful. I understand all your concerns! I also want to pass on this info: my husband and I have decided to live with 'raw' red & white mixed oak floors. It has been almost a year now and it is most of our house, including the kitchen! We have spilled red wine, greasy things, you name it ... and it all easily sands out by hand with a simple piece of sandpaper. Probably if we spilled a whole bottle of olive oil on the floor, it might be a problem ... or if a pet 'watered' the floor and it wasn't found in time (we have no pets). We love the floors this way. At first they were a bit 'pink' but that has subsided to a very plain, almost white-washed look. They are soft on the feet and on the eyes. The décor of the home fits this look. We were 'warned' and 'frightened' by many flooring specialists not to do this, but a blog, Miss Mustard Seed, gave us encouragement enough to try it out. We haven't regretted it yet. We think resale value will not be affected. Just want to share this for future flooring projects out there! Any questions, feel free to contact through this site! :O)

  • 10 years ago

    Marian has great ideas and obviously was a good resource for you. I would love to see some pics! Please!!!

  • 10 years ago

    Yes, absolutely! I googled 'raw floors' last year and her site came up because she had a post about living with raw wood floors. Her blog was a wonderful discovery! I love it! And she even took the time to write to me personally about her experience with the raw floors, encouraging me to try it, to follow my heart in it. It took some convincing for my husband, but he likes them a lot! I will send some pics ... might take a few days. Thanks for the interest! :)

  • PRO
    10 years ago
    Love your outcome!

    And we are renting a home with raw wood floors and it's great. One word of caution to those considering raw wood in a room full of Windows- when you move the furniture the sun will definitely have done a number on the floor and you will see where the old owner's furniture was.
  • 9 years ago

    I am trying to follow this process for red pine floors and I found that the Klean Strip floor bleach has been discontinued. I'm wondering if anyone knows what product a professional floor refinisher would use for this process?

  • PRO
    9 years ago

    Ouch....bleaching red pine. Zoinks! That is going to be one FUN party! Not. Even. Close. Red Pine loves being red. It has a hard time doing anything other than "red". And it doesn't take stain very well (pine and fir are notorious for splotchiness when stain is added - it is super tough to add colour to).

    If you want a lighter floor without the red, you may have to step up and find another wood/product. Red Pine isn't something that bleaches easily - nor satisfactorily.