Software
Houzz Logo Print
rickharmer

Only liquid admix-the cure???

20 years ago

I use only liquid admix for my mixes.I like the quick set times and the additional hardness that it supplies.I'll occasionally wander off and use water with admix or SP for certain other projects.

Yesterday,on a whim,I looked through two hours of websites about what the manufacturer recommends for curing.I searched high and low and found NO reference to using any moisture(water) to aid in the curing.In fact,they warn against it.When used for grouting,as was the case for our house,the builder told us to avoid getting the grout wet for 7 days!Some site simply said to keep the project at a reasonable temp,wrap it in plastic,and wait 48 hours and its ready for use.I still feel it necessary to wait 28 days before applying finishes,to allow as much set as possible.

The manufacturers have a point,though.There's no water involved in the set up so there should be no need to soak,spray or bath the project.

This isn't for everyone-costs of a 5 gallon pail of the stuff I use is still over 40 dollars,so,for the average hobbyist,using it at full strength isn't economical.

I would be interested in comments from those of you who use the stuff my way.I learned about this trick years ago,and that person(some of you oldtimers might remember Stella)turned out some interesting pieces.This same curing scenario also,I believe,applies to Quickwall as well.

As I say,this is what I do and don't see it as being for everyone.But,for the few,the brave and the slightly wacked,your comments would be of interest.And,no trash talk!!

Cheers from here

Comments (3)

Sponsored