stuff I should have known...

20 years ago

OK,hands up those of you who have been at this for a while and just realised that you don't know as much as you think?I see a few hands go up,and I'll tell my story first.

It's about fibers(or,fibres,eh?).I'd always added them to the dry mix, rubbing them between my fingers to separate them,but not really doing the job.Left little lumps of them in the mix.I use Harbourite,BTW.

Anyhow,When talking to the nice lady who'll be selling me GLASS fibers,she said that you just add the glass ones to the liquid,and they disperse evenly and quickly.

So,today,I had a "what if?"moment and added my current fibers to the liquid I use.Shazam!The fibers immediately broke up,dispersed throughout the liquid.No more rubbing them or even talking nice to them.Fibers,do your stuff!

Cheers from here

Sort by:Oldest

Comments (7)

ltd123
20 years ago
I tried that once and the fibers formed "hairballs" in the liquid and made strange lumps in the concrete. You must have a special talent!
Laura
rickharmer
Original Author
20 years ago
Nah.I imagine it works differently for different fibres.These are VERY short and fine,thinner than a human hair,but recommended by my concrete supplier.Can'yt wait for the glass ones-no furry parts!
Cheers from here
Related Professionals
Forrest City Landscape Architects & Landscape Designers · Dayton Landscape Architects & Landscape Designers · Aurora Landscape Architects & Landscape Designers · Magog Landscape Architects & Landscape Designers · Jacksonville Landscape Contractors · Rocky Mount Landscape Contractors · Winston-Salem Landscape Contractors · Bridgeport Landscape Contractors · Los Angeles Landscape Contractors · Oxnard Landscape Contractors · Alexandria Tile and Stone Contractors · Grand Island Tile and Stone Contractors · Santa Barbara Tile and Stone Contractors · Casper Tile and Stone Contractors · Sarnia Tile and Stone Contractors
rustinj
20 years ago
What, I'm finally doing something right? After the last discussion on this I figured I was using the wrong stuff.

I hope you had a great Father's Day!

Justin

Here is a link that might be useful: lengthy fiber-mixing discussion
rhonda2006
20 years ago
Speaking (again) of fibers..........have you all seen this??

Here is a link that might be useful: www.nycon.com
club_53
20 years ago
Hope the censors don't throw me off for this one, but did you guys ever try dur-o-fibar by dur-o-wall? Use it all the time and never had a problem with hair balls, lumps, bumps and other assorted nuisances. It's 1/2" chopped, alkali resistent fiberglass. Get them at the masonry supplier. If something comes out too hairy, just blow torch off the ends. Also, not too expensive for polite society.
rickharmer
Original Author
20 years ago
Tried a lttle experiment today.Clear glass container and water.First,I added fibres that are about 3/4 of an inch long,and mixed.The fibres initially dispersed,but,as I watched,they all floated to the surface.Tried the same experiment with Harborite fibres.When I mixed them,they dispersed throughout the water and stayed in suspension.So,despite previous threads by me to the contrary,it seems to me that mixing the fibres in your liquid first makes more sense.Just ensure that you mix them in,don't just dump them,or they do appear to stay in clumps.The glass ones,as I understand it,work the same way.
Cheers from here
ltd123
20 years ago
Rick - thanks for experimenting with this.. sure saves time for the rest of us!
Laura