Since no reply I will try

Have you bought & used concrete molds.
No I have made stepping stone molds using 2x2 wood.
Who should I buy molds from? Cant help -
Do you use wire mesh in your concrete. If you plan to use them to step on and not just decorative - either make them about 1 3/4 to 2" thick and cure proberly OR use some type of window screen or chicken wire. Long slow damp cure will build strength.
What is the best/cheapest mold release? I like cooking spray - PAM
Do you reinforce your molds/ if yes, how? I do not - see above answer
I need to make 50 or so stepping stones & 10 benches for two gardens.
This is not for sale, only my family personal use.

LOL --- Mike

It is an older post but I will give it a shot. I have poured 100's of molds, benches stepping stones, pedestals, flower pots you name it. When using a plastic or fiberglass mold cooking oil works great. For latex, you need to use castor oil. I always ad some wire or rebar to almost everything I pour as it is a good safety feature for in the future if the concrete was to crack years later and someone was to sit on it the wire would not let the statue break. You can buy all different types of molds at WWW.statuarymolds.com and the molds 1/8" or thicker will easily last over 50 cast if you use them properly and they all come with printed instructions. So I hope this helps if you have any other questions about concrete molds feel free to ask me.

very good

هواساز صنعتی