Software
Houzz Logo Print
vicki_lv_nv

Bottle wind charm??

19 years ago

Has anyone made a wind chime out of wine bottles, using the bottle as a whole? I think it would be cool looking, but I don't know that they wouldn't break. Ideas?

Comments (12)

  • 19 years ago

    Where was I, when I was supposed to be previewing? lol

  • 19 years ago

    I made a water bottle windchime type thing but same could be done with a wine bottle

    Here is a link that might be useful: american bottle art

  • 19 years ago

    I HAD a bottle hanging last week....but it was blowing so hard the bottle broke in half.

    I think if you plan on using more than one bottle they will hit together and break.

    patti

  • 19 years ago

    I have windchimes that I bought years ago (1980's), that are made from flattened bottles. The large middle bottle is a coke bottle and the 4 side bottles are small bottles like the airlines used to use. They are attached to driftwood, with fishing line, and hung with jack chain.

  • 19 years ago

    Oh my goodness, we must be on the same wavelength... I was thinking the same thing!! I did some searching on the net and I really would like to make something like this, but I have no idea how to go about doing it:

    Here is a link that might be useful: wine bottle wind bell

  • 19 years ago

    My wife is in the process of making some blue bottle windchimes. She is using the top half of blue wine bottles which she cut with a glass cutter. She then plans to loosely place them inside one another. I'm so anxious to see her final product. Kirk

  • 19 years ago

    I made 2 bells, used a wetsaw to cut the bottles...

    {{gwi:155362}}



    I love the blue bottles.

  • 19 years ago

    I've seen the bottles melted down to flat and used that way. It must make them denser so they don't break. (anyone of any pics of the bottle itself being used to make the sounds? as the chimes? )

    Tropicalfreak

  • 19 years ago

    Ok...I have a bottle cutter on the way. I bought some teeny tiny little bottles of Tobasco last night. Took the labels off and plan on using them inside the bottles. I have green wine bottles and some blue vodka bottles, along with clear ones. On my way to working on something. Will post photos when I have one finished.

    THANK YOU for all the suggestions. You guys rock!

  • 19 years ago

    Vicki, I made a bottle windchime on my porch, I hung them close enough together to hit each other in the wind, been there a year and so far none of them have broke. We have some heavy winds here in Southern Id. Some are from the $ store some are antique, I do have to empty the water after a rain storm. But I love they way they sound.

    {{gwi:155358}}
    {{gwi:155360}}

  • 19 years ago

    Painterchic...hope you read this...I'm from the stained glass and mosaic....I sent you an e-mail but know thru gw they don't make it sometime....I trieded cutting bottles with my wet saw and they broke all over the place ...how in the world did you do your's?Did you have a new blade I'm sure mine is dull from cuttin tile and china...thanks Annie

  • 19 years ago

    So I spend $50 on a bottle cutter and it doesn't work so well. I have broken a lot of bottles (of all kinds) trying to get them to break on the etched line. The instructions say to etch only one time, heat the bottle along the etch line with a candle, then run a piece of ice along the line and it is supposed to break on the etched line. So they say. LOL I have tried etching several times, one time, using hot water inside, ice water outside & vice versa, the candle deal, using something to tap lightly on the inside and the outside of the bottle and everytime, it either breaks the bottle or cracks it, or both. Soooooo, I have given up for now, as it frustrated me to no end. I am back to square one. I am working on it though.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Columbus' Reliable Landscape Design & Contracting