Software
Houzz Logo Print
craftylady_2006

I found a Heart Shaped Bed Frame!

18 years ago

I found this heart-shaped bed frame on my way home tonight. You just know I had to turn around and stop for it. It's a heavy metal and coated with white enamel. I love it already and only wished I had found it earlier this year. Next spring it is definitely going into my garden area either as a flower bed as some of you have so the flowers grow up threw the middle of it or I am going to use each piece separately to frame the back of two garden spots. It might even look nice with a Blackeyed Susan vine growing around the frame and heart.

Does anyone have any other suggestions for it, I'm open for other things than in the garden. I'd love a garden bench out of it but not sure how I'd attach a wooden seat to the metal frame. I'll have to check Robolady's site again!

Sal

{{gwi:191763}}

Comments (31)

  • 18 years ago
    last modified: 11 years ago

    It's so sweet! No ideas though - lol.

  • 18 years ago
    last modified: 11 years ago

    How wonderful that is. I can't imagine anyone throwing that away. But great for you....lol... It's beautiful and I know you will fine just the right place for it...

  • 18 years ago
    last modified: 11 years ago

    I'm so jealous...

  • 18 years ago
    last modified: 11 years ago

    Very pretty! I think it would make a wonderful "flower bed." Heck, it would be pretty just propped against a wall or fence with flowers in front of it or growing up it. I would love to see it as a garden bench but like you, I can't come up with a way to attach a wood seat to it. Make sure you post pictures of it situated in your garden!

  • 18 years ago
    last modified: 11 years ago

    I like antiques & can't tell if it is new or old but sure would look neat to have the higher piece leaning againest bedroom wall with necklaces over it & a couple of doilies draped over with some pretty pins displayed. Think bench idea might not look right as it is rather difficult to attach wood to it-bolt through the ends of bed but wood section would be too "clunky" looking for that lovely back. Would be great in garden either as bed or alone behind some flowers. What a lucky lady you are!! Great find!! Let us see what you do with it!! Jan

  • 18 years ago
    last modified: 11 years ago

    WHAT a FIND ! I am absolutely green with envy, LOL. That is going to be beautiful no matter how or where you use it.
    Congratulations!!

    hugs, Karen

  • 18 years ago
    last modified: 11 years ago

    Sunnyca - I'm pretty sure it's not an antique, it looks too new and there are hardly any scratches on it. The house I found it at had a For Sale sign in front of it so they must be throwing out lots of stuff and I'm surprised the bed frame was one of it. I picked up a wooden box also that has the dovetail ends and thought I could use it for something with my crafts and that might be an antique but the original handle is gone and they drilled holes into the front and put on a metal handle. Inside were some silverplated serving dishes but I think one of them is pure silver. It's got a Gorham Silver marking on the backing of it with the three markings. I'm hoping that it is real silver and I hit the jackpot on it! Wish me luck.

    I also thought of your idea to display it up against a wall but I don't have the room to do that. Drats! that was a good idea too.
    Sal

  • 18 years ago
    last modified: 11 years ago

    Yeah green with envy too!!!! Beautiful find...I'm soo glad you were the one to rescue it!

  • 18 years ago
    last modified: 11 years ago

    Me too. Me too. I am sooooo greeeeen with envy. I have th exact place for it right here in TN. Lucky lucky find. I would walk a hundred miles for something like this.

  • 18 years ago
    last modified: 11 years ago

    Another possibility.

    dcarch

    {{gwi:191764}}

  • 18 years ago
    last modified: 11 years ago

    That is a stupendous find!!! Lucky, lucky you!! One of the best bed frames I've ever seen. What about cutting a board the same size as the heart,and doing a mosaic on it, then attach it to the frame? No matter what you do, it will be lovely, I'm so happy for you!!Great find!(and I like dcarch's idea too!)
    blessings-sherri

  • 18 years ago
    last modified: 11 years ago

    No clue how to do it, but it would make a lovely garden gate.

  • 18 years ago
    last modified: 11 years ago

    WOW! Really great find! Hats off to you for going back to get it! It's amazing what people throw out, isn't it?? It would make a great trellis, or I was thinking of a garden gate as well. Also, I love Dcarch's idea too!

    Way to go!

  • 18 years ago
    last modified: 11 years ago

    What a great find! You are one lucky gal. I think a bench would be beautiful, but I don't know how to connect the seat part either. The example that Dcarch showed would certainly be a show stopper! Whatever you decide to do with it, I'm sure it will be a conversation piece. Congratulations!

  • 18 years ago
    last modified: 11 years ago

    Dcarch really has a great idea & large enough to kind of divide off a special section of your yard almost like a fence. So many possibilities! But only you know how much room you have . If you could come up with a metal seat??? Then bench would be great, couple of pillows on it ,I can just see it!! Any ideas for metal seat??? Anyone...... as I think she would love a bench. My grandma had a swing on the enclosed porch, I think it had like a metal frame with springs going across. Would have to do some welding but think really old baby bed springs (under the matresses type). Might be just about length needed & need to be cut in half lengthwise. Weld on strip to make it rectangle. Then make cushion for it. Just dreaming or would it work?????? Jan

  • 18 years ago
    last modified: 11 years ago

    I am so incredibly jealous, but also happy for you, all at the same time!! I like the flower "bed" idea, dcarch's idea, a bench, lots of possibilities. Please show us what you decide!

  • 18 years ago
    last modified: 11 years ago

    Hey, can I have that? LOL I vote for a garden gate.

  • 18 years ago
    last modified: 11 years ago

    Sal, Don't you have a white corner?? Or was that someone else???? ... I get soo confused. I had to look at it again. I am so in love with it. An old iron bed has been on my wish list for awhile now.

  • 18 years ago
    last modified: 11 years ago

    OMG, Dcarch, I am absolutely loving your idea. Thank you so much for the digital artwork you did on my photo. Wouldn't that one large piece be spectacular in a garden area! I am just drooling over the look of it as one whole piece even more than having two pieces. I like the garden gate ideas also but must tell you, I have an arbor on the one side of my house which is sort of my "entry" to my small flower beds in the backyard. My lot is 50 X 100, not big at all really and my house sits the long way on the property. I don't have the "back 40" as some of you lucky folks do.

    I'll take close up pics of the scroll work (in good light tomorrow) where it's connected at the middle heart shape and the legs, it's pretty awesome looking, sort of Victorian looking I guess.

    Thing is though, see the pole that runs down the middle of each heart - I think it's a solid metal, I'm telling ya, this thing is heavy to lift. Well not so heavy I have to get a man to do it but it does have some pounds on it to lift it. I know that middle pole is not hollow aluminum that's for sure. So, back to that middle pole - it's only about half an inch thick, it would have to be cut either right down the middle but then again, I think it would be easier to cut it off at the top and bottom where it connects to the other pieces and then, but it might look stupid, put it in the top piece in the very center of the large heart sort of like a pole with a finial on top of it (do you know what I mean?). I'll try to do that in another pic as Dcarch did - chop the pics and then put the pics back together). Then I could use something like a rooster (but if it looks Victorian, maybe not a rooster), maybe a sculpted white garden angel welded onto that top (finial) piece. What do you think? I'm not Rosie the Riviter that's for sure but I think I'd be willing to invest a few bucks into having it welded as one long piece like in the pic.

    I played with the frame and put the smaller piece behind the large piece as in her pic - it looks fantastic. Then I thought - what if I don't cut it at all and placed the smaller frame on top of the larger one. Would that look really dumb? You know, really out of place as too large of a garden piece? But then again, garden arbors are tall but not just one piece like this? Am I out of control here? LOL. I'd just have to take off the balls on the larger frame legs, which are hollow and slide a piece of rebar down into it - on each side, which I could then pound into the ground to really anchor it good, and then slide the smaller frame onto the rebar sticking out the top legs. I wonder if it would be too top heavy though and fall over in a strong thunderstorm wind which we get sometimes in the summer here. It's too pretty to have to anchor it with ropes like spiking a tent down. I guess if I had to do that though, I could then use the rope for a climbing vine and it would cover it. Yup, I think I'm outta control now and should just go with the one piece with the smaller frame cut in half and on the sides.

    Again, I am open to any suggestions, or telling me I'm a crazy nut making it into a tall one-piece. Thank you my friends, you all come up with the best ideas, that's why I love this forum so much.

    Sal

    PS - I forgot I have the metal seat part of an outdoors swing in my shed. It's longer than the frames though and that would have to be cut to fit. Also, the middle heart bottom would be covered up because the lower bar there is too low to the ground to put the seat there. What if I had a wood seat made at the correct sitting height, paint it white, put a floral bench cushion on top of the seat for comfort, and then used the small frame for the back part. I could then use the large frame next to it (pounded into the ground somewhat, at an angle maybe) for the backing of a flower bed area. The scroll work on each piece are exactly the same size, just shorter legs on the foot part. Msg to self - ok Sal, you're getting too tired and you're delirious now - call it a day and get to bed, the one with the mattress and blankets!!!! We're supposed to dip into the middle 30's tonight, might even have a frost! I'm hating it, it is way too early for a frost. But I must say, finding this bed frame is the perfect "free" birthday gift to myself (yup, Bday on Sunday). Night now.

  • 18 years ago
    last modified: 11 years ago

    May be you should sit on it a little longer for more suggestions. :-)

    dcarch
    {{gwi:191765}}

  • 18 years ago
    last modified: 11 years ago

    awesome

  • 18 years ago
    last modified: 11 years ago

    Dcarch - I love this idea too!!! You are definitely into the digital pic programs, may I ask which one you use? I have Coral Paint Shop Pro X2. I've only just begun to figure out all the things it can do.

    Yes I am open to more suggestions, anyone!!!

    Sal

  • 18 years ago
    last modified: 11 years ago

    WOW Sal, I see everyone loves your bed frame. I know I do too!!! dcarch sure had some awesome ideas with it. That bench is sooooo cute. That is so awesome to beable to do that with a pic.

  • 18 years ago
    last modified: 11 years ago

    You're so lucky! Those are some wonderful suggestions, and I'd love to see it after you decide:)
    Cherry

    Here is a link that might be useful: Kudzu's Blog

  • 18 years ago
    last modified: 11 years ago

    There are uncommon miracles to be found in everything common.
    Enjoy.

    dcarch

    {{gwi:191766}}

  • 18 years ago
    last modified: 11 years ago

    That is soooo sweet Dcarch, very, very pretty. Your digital photo knowledge is very impressive. Thank you!

    Sal

  • 18 years ago
    last modified: 11 years ago

    Awesome find, craftylady! Whatever you do with it, it will be beautiful! Love all of the ideas! Jeanne S. ...and no matter what you decide, it will look lovely in your beautiful gardens!

  • 18 years ago
    last modified: 11 years ago

    You have a newer bed frame.I have a queen size head board I bought at SA.I also bought bed rails and a friend of mine cut and welded a frame for the bed.It's very heavy so he used screws to attache seat to back for easy moving.I cut a piece of waferboard for the seat.Right now I have old pillows on the seat until I can get some foam.It still needs the frame painted white to match the bed.My bench doesn't have any arms so I have a lacy twin bed spread that hangs down over front and sides.

  • 18 years ago
    last modified: 11 years ago

    dcarch, Now that is just what that bench needed, a Fairy!!! You are sure amazing me with your talent!!!

  • 18 years ago
    last modified: 11 years ago

    Robert,
    that verse needs to go in as the header for the Garden Junk Forum page!

  • 18 years ago
    last modified: 11 years ago

    I am so jealous. I would love a bench made from that. I've been looking for a metal bed frame.