Software
Houzz Logo Print
green_skinnydipper

Sizing my Pumps

18 years ago

I read somewhere that koi ponders size their pumps to turn the volume of the pond over six times a day. I am building a natural swimming pond with a plant regeneration zone. In order to prevent algea growth, I need enough water circulation to prevent thermoclines. If I turn over the water volume too qickly I chance disturbing the zooplankton. I cannot have unhappy and/or disturbed zooplankton. I also need the water to stay in the regeneration zone long enough to feed the plants and filter the water. I have alos read that an acre size pond will remain stable with a stream feeding as low as 20 gph of fresh water, talk about low turn over, that's about the same as a garden hose.

I guestimated my water volume and have determined that six 35 gph solar pumps will turn the water over once a day. These pumps have built-in batteries for 24-hour operation. I can double the size of the solar pumps at tipple the price. I'm wondering if anyone has experience or thoughts about this. Should I do three 35 gph and three 70 gph?

Comments (4)

  • 18 years ago

    Let us know how it works out. My initial thought is that you will have a swimming hole full of algae.

  • 18 years ago

    I know nothing about solar pumps.In my own experience and from what I have read on this forum most solar pumps don't have enough power for the money so I would like to hear all about what you have found out. When you mentioned multiple pumps I had to smile because my first reaction had been to think to keep the turbulance low he would have to use a bunch of pumps. This project just keeps getting more interesting. Sandy

  • 18 years ago

    You're right Sandy, I need gentle water movement, and just enough to prevent temperature layering. My plan is to use those cheasy little fountain solar pumps. I will install a single bottom drain with five or six smaller branch pipes feeding each of the solar pumps. My theory is that by drawing the cooler water from the bottom, it will keep the pond temperature lower. Algea likes warm water.

    The cost of the pumps is nothing compared to trenching and running power through the lawn.

    The regeneration zone will be very similiar to a skippy-filter, except that it will have the same amount of surface area as the swimming zone. Don't get me wrong, I know surface area is not the correct way of calculating filter area. I'm not expecting perfection out of the gate, just looking for a good starting point, and imagine I will be experimenting with pump sizes. The nice thing about my approach is that I can always add more pumps, at least the pump salesman will like me.

  • 18 years ago

    I'll have to look into those. When we built the earthshelter in Wisconsin we did a lot of research into what kind of heat retention technologies were available and just haow effective they were. At the time there was a lot of work going into devices to move one kind of energy to another. The greenhouse was a natural heat collector, we just couldn't find a way to keep it for long. The best results were tanks of various salt solutions. The cost was out of sight. The solar panels then were just not effective enough to even heat the boy's swimming pool unless it was a 20 x 20 array. I guess it has improved but from what I have heard it's still a toy in the face of demand. I managed to raise the temperature of their pool a few degrees with coils of black hose above a reflective mylar bed laid between the pump and the intake but once again it was not very efficent. Wisconsin nights can be pretty cool.
    It was marvelous to smell the air that came into the house in the middle of the winter from the greenhouse. It was just like springtime. Sorry, I guess I am getting tired of winter. Who makes the pumps? Sandy