Try http://www.bearcatproducts.com/

Here is a link that might be useful: http://www.bearcatproducts.com/

Here is their website.
http://www.echo-usa.com/

Hey all, thanks for the help. I found the manuals on Echo's website after seeing the exact same chipper/shredder/vac on Ebay, branded as Echo-only. My model is the CSV-5S, the CSV-8S 8HP model is identical except for the engine size.

If anyone else is using this, the manuals are here: http://www.echo-usa.com/technicalresults.asp?model=CSV-5S&type=8&english=1&B1=Submit

Also, two things I learned while getting used to this chipper/shredder/vac: The 5/8"x11 tpi bolt that is needed to break the rotor free from the driveshaft is the same bolt that holds the front wheels on, so you don't need to buy one. Two, if the machine gets hard to start, runs rough, then dies altogether - check the diaphragm on the Pulsa-Jet carburetor for microscopic holes. When these things develop holes they won't draw gas - replace with Briggs&Stratton part #272538 about $2

Noll

Here is a link that might be useful: Echo CSV-5S

Lindsey

I can send you photos of a echo branded one.

Lindsey,

Someone has one posted for sale on OfferUp Seattle. Not sure where you are at but you might still be able to get it. Here's the link:

https://offerup.com/item/detail/299705459/?ref=FilteredSearch&event_source=srche437ee80fdcc479ca95a212d5839bf71

Best of luck to you.

Wow! THANKS!!

I have a Cougar Power Products model 26csv-5 in excellent condition and am interested in selling it. Or if you just need pictures I would be happy to send them to you. I live in Ohio.

Hello! There’s a Cougar Yard vacuum on sale, posted on OfferUp in San Antonio Texas. Just in case you were still looking...

I have a Cougar chipped shredder Model 26csv-5 mfg. Date 1983. Lindsey Ford wanted a picture which I'm willing to do. Not sure how to do that.

I'm also looking for a bag to replace the one i have now. It's usable but barely. Any help would be appreciated. Thanks

A tent and awning outlet will fab you up a replica asap !

i'm not sure if the echo model is the same, but when you google that chipper, bags are available. they aren't cheap, but most factory fit bags aren't.

Lindsey Ford,

Did you ever find one of your dad’s classics to purchase? I just saw one for sale in Indiana. It has a Briggs and Stratton 900 Series. The owner had it listed on Nextdoor for $280.

Let me know if you want to connect with the owner.

ps Your dad was a genius!

I just wanted to drop a note to those that have the Echo CSV-8S (I believe also for CSV-5S & CSV-5). If you need replacement blades, I have had replacement chipper knives manufactured if anyone that may be in the market for replacement parts (part number 740103000). I have tested these on my CSV-8S and they fit and work great. Just let me know.

l’m look at buying one that might need blades and a bag. How much are the blades HU-695244636?

michaelhenry or HU-695244636 my # is 7062555092.

How do you get to the blades. Need a manual for the 26csv-5 to figure how or can someone explain how to get to them?

You need to pull the chipping wheel off one bolt in the centre and a hammer and some patience

Thanks, Got the bolt out of the center but it wouldn't budge so rather than force the issue thought it best to ask the question. At least I'm on the right track..

To remove the chipper wheel from the engine shaft: There are 9/16” diameter bolt threads inside chipper wheel where the shaft bolt passed through. It is designed to push the chipping wheel off of the engine shaft. Screw a 9/16” diameter X 1-1/2” long bolt into these threads, pushing against the engine shaft as it is tightened. Once you have tightened the bolt, tap the top of the bolt using a hammer & punch, releasing the chipper wheel from the engine shaft. (You may need to tighten the bolt again after you have tapped it). The wheel will come loose from the tapered shaft. I use anti-seize compound on the shaft and square key when reassembling, to make it easier to disassemble next time.

Thanks Jeff, I'll give it a try this week sometime. I'll let you know how I fare.

I have a cougar lawn sweep, runs fine, great shape. Want to sell it a sit is a push machine,

I have a early to mid-90's vintage Cougar chipper/shredder like the one Rob Black shared a photo of above. I bought it from the factory in northeast Ohio and I also got a hose accessory with it. It has an identification label, but does not have a serial number as it was a prototype/experimental/test unit. It's seen better days, but with any luck it will be running again this month.

I have a Cougar great shape 5 hp. runs great, always stored inside. in Minneapolis make offer.

56allanjon@gmail.com.

I have a Cougar 3 wheeled chipper shredder push unit with a Briggs and Stratton 5 horse motor in Ohio located a 4 wheeled self propelled unit in Pittsburgh I will be purchasing and doing a full complete restoration of. I have done a complete restoration of the 3 wheeled version and use it in regular service for customers. I'm looking forward to restoring the 4 wheeled Cougar. I have been told all tires are new and that it runs well and has been stored inside. It has been used in regular service and the bag is the original Cougar labeling. Echo does make the bag for this unit. I will have the blower attachment fabricated for both of my units.

The chipper portion will take what size will fit in the base of the chute. That is 3 inches or slightly over. The blades are held in with flush mounted machine screws. The flywheel must be removed in order to access the blades for sharpening.