Software
Houzz Logo Print
vagn52

Repower old equipment

16 years ago

im thinking of repowering my 1984 simplicity briggs 326437 16hp single with a 16 hp vangaurd twin.

was wondering if anyone has done this with their tractor. any tractor not just simplicity.

the mower deck is in decent shape needs rollers.

im told the hydro is in better than expected shape [whatever that means]. maybe meaning not throwing good money after bad.

thanks for looking, any advice is welcome

thanks, pete

seen the motor anywhere from $1100 to $1300. might be lower than $1100 cant remember.

Comments (6)

  • 16 years ago

    For me I just swapped a Briggs that the previous owner ran dry on oil with a Kohler, they mated perfectly, I have yet to try and start it since the wiring is slightly different

    I think I have it all wired up correctly but due to age old migraine that sets in once in a while I have yet to try and fire my unit.

    Clearly you could put just about anything on that tractor if you can get the electrics to match.

    And, a 1100 modern day tractor is flimsy. That old Simplicity you have to replace it probably is closer to 2 grand.

    My humble opinion only.

  • 16 years ago

    Plenty of people have repowered older garden tractors quite successfully but this is not a task that should be entered into lightly. Right now, as a running tractor, your Simp has a certain value. For argument's sake, we'll say that value is $400.00.

    If you spend $1300.00 for a new Vanguard and a few bucks more to buy a few other things to make the repower work right, then do so with the idea of keeping this machine at least five years and a more realistic time-frame would be ten years. One month after doing the repower, no one will pay you $1900.00 for this 26 year old tractor. You will be lucky to get half that amount.

    The only way to get your money back on this investment is to keep the tractor and USE IT as often as possible.

    Have you talked to Small Engine Warehouse or Jim's Tractors? These people are but two of the companies that specialize in supplying late model OHV twins to repower older machines that came with cast iron single cylinder motors. As much as I love the old iron, you will notice a big improvement with the repower. It will run smoother, quieter and the fuel economy will be dramatic.

    Let us know what you decide.

  • 16 years ago

    I repowered an 11 hp Tecumseh with a newer 11 hp Tecumseh on my '87 MTD Wards rider, same shaft dia. and length, pretty much a bolt-in proposition with the added advantage of a pull starter as well aw the electric start for when the battery goes dead, and it will. I wouldn't put so much money into a replacement Vangaurd motor on that mower. Just get a close spec regular Briggs with same mounting dims and shaft diameter/length.

  • 16 years ago

    My sit down mower is a '77 IH Cadet 80. with a 36" deck. It was re-engined with an electric start 11hp B+S. It looks beat up but 'most everything works. It has a hydro-static trans and a pretty rugged frame and front end. It was sold new in a time when it was assumed that if you were smart enough to make the money to buy the item, you were smart enough to read the owner's manual. It is a bone simple machine, so simple it is elegant.

  • 16 years ago

    thanks kompressor
    i have no intention of selling it. the tractors been been around and it just kinda fits. you're right about additional costs. also right about small engine warehouse. they got me thinking about this months ago. i just know this tractor. its awfully hilly around here. its stable on these hills with caution
    thaks pete

  • 16 years ago

    sorry about not posting, had a death in the family the tractor didnt seem important.

    i dont want to start a new thread but i too love the cast irons. are the vangaurds a lower end briggs? i am concerned about the throttle. my 7116 is a pain to work on. the lever at the dash. ill do a parts lookup to make sure i have all the washers. i also understand the oil filter wont fit. wont fit or pain in the a$$ to make it fit. i didnt know about jims tractors. ill look into that. also the idea of a close briggs. i need to get this done. the site i see the motor claims it drops in fairly easy.
    thanks everyone for answering and sorry again for not keeping up with my own post
    pete

Sponsored
Industry Leading General Contractors in Franklin County, Ohio