Software
Houzz Logo Print
mownie

Craftsman Owners Alert

16 years ago

There has been some recent interest on the forum regarding parts configuration/orientation of the "blade brake mechanism" featured on many Craftsman Tractors.

Sears is not clear in their IPLs or Owner's Manuals about how to service this mechanism, or that it even exists.

In the thread found at the link below, I made a weak appeal or suggestion that perhaps owners of the Craftsman models (or similar models) might post some photos of their tractor's blade brake components. Then we would at least be able to graphically understand the system and where the parts go.

Models 917.257631, 917.273135, and 917.273770 have all been cited as being in this family.

If you are an owner of any of these models, and would like to contribute to the information process, please post some photos in this thread.

Here is a link that might be useful: Non-stop blades

Comments (3)

  • 16 years ago

    I got 917.254941 that has manual clutch with simple brake that stops the spindles. It has spring that when you disegage it the spring puts tension on the brake and the brake stops the blades (clearly shows it in the IPB brakdown in my manual, but it gives no instructions on how to work on it. I think they was to send sears mechanic out for that.

    Somebody ask the question on the elect clutch models does the clutch brake the blades. IMO no when you push in the RIO knob the cuts 12Vs to the clutch and cause it to free wheel. so there much me a seperate system to stop the blades. I know my aunt model 917.270762 has a manual lever but and elect clutch with no RIO push/pull switch. For what I remember as the lever goes up it releases the spindle brakes maunally and then kicks in the elect clutch. which the brake is similar design to my braking system due to the maunal over the hump lever.

    So the big question is IMO does these models have rio/buttoms or manual over the hump lever with or without elect clutch?

  • 16 years ago

    42" decks: Commonly there is the old manual pto version that uses solid links to move the idler cam that uses brake arms w/ a spring on each arm, may be spec'd with a return spring for the upper linkage - but never have a return spring on the idler cam. The somewhat newer manual version which is more popular yet, uses a cable- so it has a return spring which hooks from the idler cam to a slot in the front of the deck. It has the same brake arms w/ springs and idler cam. If the blades do not stop- in most cases it is because debris or corrosion has caused the idler cam to bind, the return spring is missing on cable models, or the idler cam is worn. In all cases it is much easier to remove the deck, clean the top and get touchy feely with it to see why it is binding. Electric PTO are braked by the clutch itself- no other brake arms. Ever notice the drag on the PTO clutch when installing the belt?Newer Sears models will have the kill switch built into reverse. Don't know about reverse mow overide...

  • 16 years ago

    Well that's all pretty good information, but I don't see any pictures????????????
    And the big question is "Does anybody have some pictures of their Craftsman decks that have a blade brake on the deck?"

Sponsored