Software
Houzz Logo Print
jimw606

GT5000 Wiring 917.276101

16 years ago

I had to install a new battery,and I noticed a wire connector wit 2 black wires, coming up from under neath with the Red battery cable. There is no voltage on the wire, with or without the switch on. I cannot figure out if it is supposed to be loose, or where it should go. It will not reach the switch and I cannot find a wiring diagram that is worth anything. GT5000 917.276101

Any ideas would be greatly appreciated.

PS. It runs fine since new battery.

Comments (2)

  • 16 years ago

    Finding extra or unused wiring connectors is not unusual at all.
    It has become "typical" for different models, or versions, of wired products to be served by a single "base wiring harness" that "will work" in a number of different applications, sometimes leaving a few unused connectors on certain models.
    OEMs do this for a number of reasons.
    If one harness can work for many different models, the OEM has a better chance of negotiating a lower price (for the OEM, not the consumer) from the contracting supplier due to a larger unit volume of one harness instead of lesser unit volumes of several different harnesses.
    This practice also serves the OEM (and the consumer) if the consumer wants to "add an optional extra" component to a base model that was built without that option.

    In the field, if you find an unused connector after removing a cover or panel wherein the vehicle wiring components tend to pull against the wiring harness, it is necessary to determine whether that connector was pulled loose from something, or if it is simply there to serve an optional component (hour meter, for example) or additional safety interlock devices that the machine does not have installed.
    Whenever I discover an "unplugged" connector, I examine the open end of the connector (where it would if it could, plug into something) with a good light and a magnifying glass. If there are traces of dirt, dust, tiny cobwebs, or other debris present inside the openings of the connector............it has been open for a long time.
    If, however, the inside of the conector is perfectly clean, and/or you can detect a "parting line" on the metal wire terminals inside, that implies that it has just now separated from something.

    If the tractor has run fine as long as you have owned it, and all the functions you have seem to be in good order, the empty connector you found has probably been empty from Day One.

    {{gwi:347242}}

  • 16 years ago

    Thanks Mownie: As I said, it appears to be a ground.
    I just couldn't believe that I had not noticed it before.
    I was having problems yesterday with my 6 year old battery.
    After jump starting and mowing, I started having problems with the motor dying on hills. None of this had ever happened before, so I guess I was looking for a reason. Thanks for everything. Jim

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Columbus' Reliable Landscape Design & Contracting